// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2018 Marvell International Ltd.
 */

#define GPIO_ACTIVE_HIGH 0
#define GPIO_ACTIVE_LOW  1

#include "cn9130.dtsi" /* include SoC device tree */

/ {
        model = "DB-CN-9130";
        compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
                     "marvell,armada-ap807";

        cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
                compatible = "regulator-fixed";
                regulator-name = "cp0-xhci0-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
                gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
        };

        cp0_usb3_0_phy0: cp0_usb3_phy0 {
                compatible = "usb-nop-xceiv";
                vcc-supply = <&cp0_reg_usb3_vbus0>;
        };

        cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
                compatible = "regulator-fixed";
                regulator-name = "cp0-xhci1-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
                gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
        };

        cp0_usb3_0_phy1: cp0_usb3_phy1 {
                compatible = "usb-nop-xceiv";
                vcc-supply = <&cp0_reg_usb3_vbus1>;
        };

        cp0_reg_sd_vccq: cp0_sd_vccq@0 {
                compatible = "regulator-gpio";
                regulator-name = "cp0_sd_vccq";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
                states = <1800000 0x1
                          3300000 0x0>;
        };

        ap0_reg_sd_vccq: ap0_sd_vccq@0 {
                compatible = "regulator-gpio";
                regulator-name = "ap0_sd_vccq";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
                states = <1800000 0x1
                          3300000 0x0>;
        };

        cp0_reg_sd_vcc: cp0_sd_vcc@0 {
                compatible = "regulator-fixed";
                regulator-name = "cp0_sd_vcc";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
                gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
                enable-active-high;
                regulator-always-on;
        };

        cp0_sfp_eth0: sfp-eth0 {
                compatible = "sff,sfp";
                i2c-bus = <&cp0_sfpp0_i2c>;
                los-gpio = <&cp0_moudle_expander1 11 GPIO_ACTIVE_HIGH>;
                mod-def0-gpio = <&cp0_moudle_expander1 10 GPIO_ACTIVE_LOW>;
                tx-disable-gpio = <&cp0_moudle_expander1 9 GPIO_ACTIVE_HIGH>;
                tx-fault-gpio = <&cp0_moudle_expander1 8 GPIO_ACTIVE_HIGH>;
                status = "disabled";
        };
};

/*
 * CP0
 */
&cp0_i2c0 {
        clock-frequency = <100000>;

        /* U36 */
        expander0: pca953x@21 {
                compatible = "nxp,pca9555";
                pinctrl-names = "default";
                gpio-controller;
                #gpio-cells = <2>;
                reg = <0x21>;
                status = "okay";
        };

        /* U42 */
        eeprom0: eeprom@50 {
                compatible = "atmel,24c64";
                reg = <0x50>;
                pagesize = <0x20>;
        };

        /* U38 */
        eeprom1: eeprom@57 {
                compatible = "atmel,24c64";
                reg = <0x57>;
                pagesize = <0x20>;
        };
};

&cp0_i2c1 {
        clock-frequency = <100000>;

        /* SLM-1521-V2 - U3 */
        i2c-mux@72 { /* verify address - depends on dpr */
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0x72>;
                cp0_sfpp0_i2c: i2c@0 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0>;
                };

                i2c@1 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
                        /* U12 */
                        cp0_moudle_expander1: pca9555@21 {
                                compatible = "nxp,pca9555";
                                pinctrl-names = "default";
                                gpio-controller;
                                #gpio-cells = <2>;
                                reg = <0x21>;
                        };

                };
        };
};


&cp0_sdhci0 {
        pinctrl-names = "default";
        pinctrl-0 = <&cp0_sdhci_pins>;
        bus-width = <4>;
        no-1-8-v;
        vqmmc-supply = <&cp0_reg_sd_vccq>;
        vmmc-supply = <&cp0_reg_sd_vcc>;
};

&cp0_usb3_0 {
        status = "okay";
        usb-phy = <&cp0_usb3_0_phy0>;
        phy-names = "usb";
};

&cp0_usb3_1 {
        status = "okay";
        usb-phy = <&cp0_usb3_0_phy1>;
        phy-names = "usb";
};