/** @file
  HDAUDIO policy

  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _HDAUDIO_CONFIG_H_
#define _HDAUDIO_CONFIG_H_

#include <ConfigBlock.h>
#include <PchLimits.h>

#define HDAUDIO_PREMEM_CONFIG_REVISION 2
#define HDAUDIO_CONFIG_REVISION 1
#define HDAUDIO_DXE_CONFIG_REVISION 1

extern EFI_GUID gHdAudioPreMemConfigGuid;
extern EFI_GUID gHdAudioConfigGuid;
extern EFI_GUID gHdAudioDxeConfigGuid;

#pragma pack (push,1)

///
/// The PCH_HDAUDIO_CONFIG block describes the expected configuration of the Intel HD Audio feature.
///

#define HDAUDIO_VERB_TABLE_VIDDID(Vid,Did)                      (UINT32)((UINT16)Vid | ((UINT16)Did << 16))
#define HDAUDIO_VERB_TABLE_RID_SDI_SIZE(Rid,Sdi,VerbTableSize)  (UINT32)((UINT8)Rid | ((UINT8)Sdi << 8) | ((UINT16)VerbTableSize << 16))
#define HDAUDIO_VERB_TABLE_CMD_SIZE(VerbTable)                  ((sizeof (VerbTable) - sizeof (HDA_VERB_TABLE_HEADER)) / (sizeof (UINT32)))

///
/// Use this macro to create HDAUDIO_VERB_TABLE and populate size automatically
///
#define HDAUDIO_VERB_TABLE_INIT(Vid,Did,Rid,Sdi,...) \
{ \
  { Vid, Did, Rid, Sdi, (sizeof((UINT32[]){__VA_ARGS__})/sizeof(UINT32)) }, \
  { __VA_ARGS__ } \
}


/**
  Azalia verb table header
  Every verb table should contain this defined header and followed by azalia verb commands.
**/
typedef struct {
  UINT16  VendorId;             ///< Codec Vendor ID
  UINT16  DeviceId;             ///< Codec Device ID
  UINT8   RevisionId;           ///< Revision ID of the codec. 0xFF matches any revision.
  UINT8   SdiNum;               ///< SDI number, 0xFF matches any SDI.
  UINT16  DataDwords;           ///< Number of data DWORDs following the header.
} HDA_VERB_TABLE_HEADER;

#ifdef _MSC_VER
//
// Disable "zero-sized array in struct/union" extension warning.
// Used for neater verb table definitions.
//
#pragma warning (push)
#pragma warning (disable: 4200)
#endif
typedef struct  {
  HDA_VERB_TABLE_HEADER  Header;
  UINT32 Data[];
} HDAUDIO_VERB_TABLE;
#ifdef _MSC_VER
#pragma warning (pop)
#endif

typedef struct {
  UINT32   ClkA;            ///<  Pin mux configuration. Refer to GPIO_*_MUXING_DMIC*_CLKA_*
  UINT32   ClkB;            ///<  Pin mux configuration. Refer to GPIO_*_MUXING_DMIC*_CLKB_*
  UINT32   Data;            ///<  Pin mux configuration. Refer to GPIO_*_MUXING_DMIC*_DATA_*
} HDA_DMIC_PIN_MUX;

/**
  HD Audio Link Policies
**/
typedef struct {
  UINT32  Enable    :  1;  ///< HDA interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
  UINT32  RsvdBits0 : 31;
  UINT8   SdiEnable[PCH_MAX_HDA_SDI];  ///< HDA SDI signal enable. When enabled related SDI pins will be switched to appropriate native mode: <b>0: Disable</b>; 1: Enable
  UINT8   Reserved[(4 - (PCH_MAX_HDA_SDI % 4)) % 4];  ///< Padding for SDI enable table.
} HDA_LINK_HDA;

/**
  HD Audio DMIC Interface Policies
**/
typedef struct {
  UINT32             Enable          :  1;  ///< HDA DMIC interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
  UINT32             DmicClockSelect :  2;  ///< DMIC link clock select: <b>0: Both</b>, 1: ClkA, 2: ClkB; default is "Both"
  UINT32             RsvdBits0       : 29;
  HDA_DMIC_PIN_MUX   PinMux;          ///< Pin mux configuration.
} HDA_LINK_DMIC;

/**
  HD Audio SSP Interface Policies
**/
typedef struct {
  UINT32             Enable    :  1;  ///< HDA SSP interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
  UINT32             RsvdBits0 : 31;
} HDA_LINK_SSP;

/**
  HD Audio SNDW Interface Policies
**/
typedef struct {
  UINT32             Enable    :  1;  ///< HDA SNDW interface enable. When enabled related pins will be switched to native mode: <b>0: Disable</b>; 1: Enable.
  UINT32             RsvdBits0 : 31;
} HDA_LINK_SNDW;


/**
  This structure contains the policies which are related to HD Audio device (cAVS).

  <b>Revision 1:</b>
  - Inital version.

**/
typedef struct {
  CONFIG_BLOCK_HEADER   Header;          ///< Config Block Header
  UINT32  Pme                   :  1;    ///< Azalia wake-on-ring, <b>0: Disable</b>; 1: Enable
  UINT32  CodecSxWakeCapability :  1;    ///< Capability to detect wake initiated by a codec in Sx (eg by modem codec), <b>0: Disable</b>; 1: Enable
  UINT32  HdAudioLinkFrequency  :  4;    ///< HDA-Link frequency (PCH_HDAUDIO_LINK_FREQUENCY enum): <b>2: 24MHz</b>, 1: 12MHz, 0: 6MHz
  UINT32  RsvdBits0             : 26;    ///< Reserved bits 0
  /**
    Number of the verb table entry defined in VerbTablePtr.
    Each entry points to a verb table which contains HDAUDIO_VERB_TABLE structure and verb command blocks.
  **/
  UINT8   VerbTableEntryNum;
  UINT8   Rsvd0[3];                         ///< Reserved bytes, align to multiple 4
  /**
    Pointer to a verb table array.
    This pointer points to 32bits address, and is only eligible and consumed in post mem phase.
    Each entry points to a verb table which contains HDAUDIO_VERB_TABLE structure and verb command blocks.
    The prototype of this is:
    HDAUDIO_VERB_TABLE **VerbTablePtr;
  **/
  UINT32  VerbTablePtr;
} HDAUDIO_CONFIG;

/**
  This structure contains the premem policies which are related to HD Audio device (cAVS).

  <b>Revision 1:</b>
  - Inital version.
  <b>Revision 2:</b>
  - Add DmicClockSelect
**/
typedef struct {
  CONFIG_BLOCK_HEADER   Header;          ///< Config Block Header
  UINT32  Enable                :  1;    ///< Intel HD Audio (Azalia) enablement: 0: Disable, <b>1: Enable</b>
  UINT32  DspEnable             :  1;    ///< DSP enablement: 0: Disable; <b>1: Enable</b>
  UINT32  VcType                :  1;    ///< Virtual Channel Type Select: <b>0: VC0</b>, 1: VC1
  /**
    Universal Audio Architecture compliance for DSP enabled system:
    <b>0: Not-UAA Compliant (Intel SST driver supported only)</b>,
       1: UAA Compliant (HDA Inbox driver or SST driver supported)
  **/
  UINT32  DspUaaCompliance      :  1;
  UINT32  IDispLinkFrequency    :  4;    ///< iDisp-Link frequency (PCH_HDAUDIO_LINK_FREQUENCY enum): <b>4: 96MHz</b>, 3: 48MHz
  UINT32  IDispLinkTmode        :  3;    ///< iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): <b>0: 2T</b>, 1: 1T, 2: 4T, 3: 8T, 4: 16T
  UINT32  IDispCodecDisconnect  :  1;    ///< iDisplay Audio Codec disconnection, <b>0: Not disconnected, enumerable</b>; 1: Disconnected SDI, not enumerable
  UINT32  PowerGatingSupported  :  1;    ///< Power Gating supported: <b>0: Not supported</b>, 1: Supported
  UINT32  RsvdBits              : 19;    ///< Reserved bits 0

  /**
    Audio Link Mode configuration bitmask.
    Allows to configure enablement of the following interfaces: HDA-Link, DMIC, SSP, SoundWire.
  **/

  HDA_LINK_HDA          AudioLinkHda;    ///< HDA-Link enablement: 0: Disable; <b>1: Enable</b>.
  /**
    DMIC link enablement: 0: Disable; <b>1: Enable</b>.
    DMIC0  LKF: Muxed with SNDW2/SNDW4.
  **/
  HDA_LINK_DMIC         AudioLinkDmic [2];
  /**
    I2S/SSP link enablement: <b>0: Disable</b>; 1: Enable.
    SSP0/1 LKF: Muxed with HDA.
    @note Since the I2S/SSP2 pin set contains pads which are also used for CNVi purpose, enabling AudioLinkSsp2
    is exclusive with CNVi is present.
  **/
  HDA_LINK_SSP          AudioLinkSsp  [PCH_MAX_HDA_SSP_LINK_NUM];
  /**
    SoundWire link enablement: <b>0: Disable</b>; 1: Enable.
    SNDW2  LKF: Muxed with DMIC0/DMIC1.
    SNDW3  LKF: Muxed with DMIC1.
    SNDW4  LKF: Muxed with DMIC0.
  **/
  HDA_LINK_SNDW         AudioLinkSndw [PCH_MAX_HDA_SNDW_LINK_NUM];


  UINT16  ResetWaitTimer;                   ///< <b>(Test)</b> The delay timer after Azalia reset, the value is number of microseconds. Default is <b>600</b>.
  UINT8   Rsvd0[2];                         ///< Reserved bytes, align to multiple 4

} HDAUDIO_PREMEM_CONFIG;

typedef struct {
  UINT32  AutonomousClockStop        :  1;    ///< SoundWire1 link autonomous clock stop capability: <b>0: Disable</b>; 1: Enable
  UINT32  DataOnActiveIntervalSelect :  2;    ///< SoundWire1 link data on active interval select 0: 3 clock periods; <b>1: 4 clock periods</b>; 2: 5 clock periods; 3: 6 clock periods
  UINT32  DataOnDelaySelect          :  1;    ///< SoundWire1 link data on delay select 0: 2 clock periods; <b>1: 3 clock periods</b>
  UINT32  RsvdBits1                  : 28;    ///< Reserved bits 1
} HDAUDIO_SNDW_CONFIG;

/**
  This structure contains the DXE policies which are related to HD Audio device (cAVS).
  <b>Revision 1:</b>
  - Inital version.
**/
typedef struct {
  CONFIG_BLOCK_HEADER        Header;          ///< Config Block Header
  /**
    SNDW configuration for exposed via SNDW ACPI tables:
  **/
  HDAUDIO_SNDW_CONFIG        SndwConfig[PCH_MAX_HDA_SNDW_LINK_NUM];
  /**
    Bitmask of supported DSP features:
    [BIT0] - WoV; [BIT1] - BT Sideband; [BIT2] - Codec VAD; [BIT5] - BT Intel HFP; [BIT6] - BT Intel A2DP
    [BIT7] - DSP based speech pre-processing disabled; [BIT8] - 0: Intel WoV, 1: Windows Voice Activation
    Default is <b>zero</b>.
  **/
  UINT32  DspFeatureMask;
} HDAUDIO_DXE_CONFIG;

#pragma pack (pop)

#endif // _HDAUDIO_CONFIG_H_