/** @file
  DMI policy

  Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _CPU_DMI_PREMEM_CONFIG_H_
#define _CPU_DMI_PREMEM_CONFIG_H_

#include <ConfigBlock.h>
#include <Register/SaRegsHostBridge.h>

#define DMI_CONFIG_REVISION 1

#define CPU_DMI_HWEQ_COEFFS_MAX    8

#pragma pack (push,1)
///
/// The values before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature
///
typedef enum {
  DmiAspmDisabled,
  DmiAspmL0s,
  DmiAspmL1,
  DmiAspmL0sL1,
  DmiAspmAutoConfig,
  DmiAspmMax
} DMI_ASPM;


/**
  The CPU_DMI_CONFIG block describes the expected configuration of the CPU for DMI.
  <b>Revision 1</b>:
  - Initial version.
**/
typedef struct {
  CONFIG_BLOCK_HEADER   Header;         ///< Config Block Header

/**
  - <b>Auto</b> (0x0)  : Maximum possible link speed (Default)
  - Gen1        (0x1)  : Limit Link to Gen1 Speed
  - Gen2        (0x2)  : Limit Link to Gen2 Speed    CpuDmiPreMemConfig
  - Gen3        (0x3)  : Limit Link to Gen3 Speed
  **/
  UINT8                  DmiMaxLinkSpeed;
  /**
   <b>(Test)</b> DMI Equalization Phase 2 Enable Control
  - Disabled       (0x0) : Disable phase 2
  - Enabled        (0x1) : Enable phase 2
  - <b>Auto</b>    (0x2) : Use the current default method (Default)
  **/
  UINT8                  DmiGen3EqPh2Enable;
  /**
   <b>(Test)</b> Selects the method for performing Phase3 of Gen3 Equalization on DMI
  - <b>Auto</b> (0x0)  : Use the current default method (Default)
  - HwEq        (0x1)  : Use Adaptive Hardware Equalization
  - SwEq        (0x2)  : Use Adaptive Software Equalization (Implemented in BIOS Reference Code)
  - Static      (0x3)  : Use the Static EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just Phase1)
  - Disabled    (0x4)  : Bypass Equalization Phase 3
  **/
  UINT8                  DmiGen3EqPh3Method;
  /**
   <b>(Test)</b> Program DMI Gen3 EQ Phase1 Static Presets
  - Disabled        (0x0)  : Disable EQ Phase1 Static Presets Programming
  - <b>Enabled</b>  (0x1)  : Enable  EQ Phase1 Static Presets Programming (Default)
  **/
  UINT8                  DmiGen3ProgramStaticEq;
  UINT8                  DmiDeEmphasis;                               ///< DeEmphasis control for DMI (-6 dB and -3.5 dB are the options)
  UINT8                  DmiAspm;
  UINT8                  DmiAspmCtrl;                                 ///< ASPM configuration on the CPU side of the DMI/OPI Link. Default is <b>DmiAspmAutoConfig</b>
  UINT8                  DmiAspmL1ExitLatency;                        ///< ASPM configuration on the CPU side of the DMI/OPI Link. Default is <b>DmiAspmAutoConfig</b>
  UINT8                  DmiGen3RootPortPreset[SA_DMI_MAX_LANE];      ///< Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
  UINT8                  DmiGen3EndPointPreset[SA_DMI_MAX_LANE];      ///< Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
  UINT8                  DmiGen3EndPointHint[SA_DMI_MAX_LANE];        ///< Hint value per lane for the DMI Gen3 End Point. Range: 0-6, 2 is default for each lane

  /**
   DMI Gen3 RxCTLEp per-Bundle control. The range of the setting is (0-15). This setting
   has to be specified based upon platform design and must follow the guideline. Default is 12.
  **/

  UINT8                  DmiGen3RxCtlePeaking[SA_DMI_MAX_BUNDLE];
} CPU_DMI_PREMEM_CONFIG;

#pragma pack (pop)

#endif // _CPU_DMI_CONFIG_H_