/** @file
  System reset library services.

Copyright (c) 2017 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/
#include <Base.h>
#include <PchAccess.h>
#include <Library/IoLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/PeiServicesLib.h>
#include <Library/MmPciLib.h>
#include <Library/PchResetLib.h>
#include <Library/ResetSystemLib.h>
#include <Library/PchCycleDecodingLib.h>
#include <Ppi/PchReset.h>
#ifdef FSP_FLAG
#include <Library/FspCommonLib.h>
#endif
/**
  Dump reset message for debug build readability
**/
VOID
DumpResetMessage (
  VOID
  )
{
  DEBUG_CODE_BEGIN ();
  UINTN       Index;
  //
  // ******************************
  // **    SYSTEM REBOOT !!!     **
  // ******************************
  //
  for (Index = 0; Index < 30; Index++) {
    DEBUG ((DEBUG_INFO, "*"));
  }
  DEBUG ((DEBUG_INFO, "\n**    SYSTEM REBOOT !!!     **\n"));
  for (Index = 0; Index < 30; Index++) {
    DEBUG ((DEBUG_INFO, "*"));
  }
  DEBUG ((DEBUG_INFO, "\n"));
  DEBUG_CODE_END ();
}

/**
  Execute call back function for Pch Reset.

  @param[in] ResetType            Reset Types which includes PowerCycle, GlobalReset.

  @retval EFI_SUCCESS             The callback function has been done successfully
  @retval EFI_NOT_FOUND           Failed to find Pch Reset Callback protocol. Or, none of
                                  callback protocol is installed.
**/
EFI_STATUS
PchResetCallback (
  IN  PCH_RESET_TYPE      ResetType
  )
{
  EFI_STATUS              Status;
  UINTN                   Instance;
  PCH_RESET_CALLBACK_PPI  *PchResetCallbackPpi;

  Instance = 0;
  do {
    Status = PeiServicesLocatePpi (
               &gPchResetCallbackPpiGuid,
               Instance,
               NULL,
               (VOID **) &PchResetCallbackPpi
               );

    switch (Status) {
      case EFI_SUCCESS:
        PchResetCallbackPpi->ResetCallback (ResetType);
        break;
      case EFI_NOT_FOUND:
        break;
      default:
        ASSERT_EFI_ERROR (Status);
        break;
    }
    ++Instance;
  } while (Status == EFI_SUCCESS);

  return EFI_SUCCESS;
}

/**
  Calling this function causes a system-wide reset. This sets
  all circuitry within the system to its initial state. This type of reset
  is asynchronous to system operation and operates without regard to
  cycle boundaries.

  System reset should not return, if it returns, it means the system does
  not support cold reset.
**/
VOID
EFIAPI
ResetCold (
  VOID
  )
{
  //
  // Loop through callback functions of PchResetCallback PPI
  //
  PchResetCallback ((PCH_RESET_TYPE) EfiResetCold);
#ifdef FSP_FLAG
  FspApiReturnStatusReset (FSP_STATUS_RESET_REQUIRED_COLD);
#endif
  DumpResetMessage ();

  IoWrite8 (R_PCH_RST_CNT, V_PCH_RST_CNT_FULLRESET);
}

/**
  Calling this function causes a system-wide initialization. The processors
  are set to their initial state, and pending cycles are not corrupted.

  System reset should not return, if it returns, it means the system does
  not support warm reset.
**/
VOID
EFIAPI
ResetWarm (
  VOID
  )
{
  //
  // Loop through callback functions of PchResetCallback PPI
  //
  PchResetCallback ((PCH_RESET_TYPE) EfiResetWarm);
#ifdef FSP_FLAG
  FspApiReturnStatusReset (FSP_STATUS_RESET_REQUIRED_WARM);
#endif
  DumpResetMessage ();

  IoWrite8 (R_PCH_RST_CNT, V_PCH_RST_CNT_HARDRESET);
}

/**
  Calling this function causes the system to enter a power state equivalent
  to the ACPI G2/S5 or G3 states.

  System shutdown should not return, if it returns, it means the system does
  not support shut down reset.
**/
VOID
EFIAPI
ResetShutdown (
  VOID
  )
{
  UINT16         ABase;
  UINT32         Data32;

  //
  // Loop through callback functions of PchResetCallback PPI
  //
  PchResetCallback ((PCH_RESET_TYPE) EfiResetShutdown);

  PchAcpiBaseGet (&ABase);
  ///
  /// Firstly, GPE0_EN should be disabled to avoid any GPI waking up the system from S5
  ///
  IoWrite32 ((UINTN) (ABase + R_PCH_ACPI_GPE0_EN_127_96), 0);

  ///
  /// Secondly, PwrSts register must be cleared
  ///
  /// Write a "1" to bit[8] of power button status register at
  /// (PM_BASE + PM1_STS_OFFSET) to clear this bit
  ///
  IoWrite16 ((UINTN) (ABase + R_PCH_ACPI_PM1_STS), B_PCH_ACPI_PM1_STS_PWRBTN);

  ///
  /// Finally, transform system into S5 sleep state
  ///
  Data32 = IoRead32 ((UINTN) (ABase + R_PCH_ACPI_PM1_CNT));

  Data32 = (UINT32) ((Data32 &~(B_PCH_ACPI_PM1_CNT_SLP_TYP + B_PCH_ACPI_PM1_CNT_SLP_EN)) | V_PCH_ACPI_PM1_CNT_S5);

  IoWrite32 ((UINTN) (ABase + R_PCH_ACPI_PM1_CNT), Data32);

  Data32 = Data32 | B_PCH_ACPI_PM1_CNT_SLP_EN;

  DumpResetMessage ();

  IoWrite32 ((UINTN) (ABase + R_PCH_ACPI_PM1_CNT), Data32);

  return;
}

/**
  Internal function to execute the required HECI command for GlobalReset,
  if failed will use PCH Reest.

**/
STATIC
VOID
PeiPchGlobalReset (
  VOID
  )
{
  UINTN            PchPmcBase;

  //
  // Loop through callback functions of PchResetCallback PPI
  //
  PchResetCallback (PchGlobalReset);

#ifdef FSP_FLAG
  FspApiReturnStatusReset (FSP_STATUS_RESET_REQUIRED_3);
#endif

  PchPmcBase = MmPciBase (
                 DEFAULT_PCI_BUS_NUMBER_PCH,
                 PCI_DEVICE_NUMBER_PCH_PMC,
                 PCI_FUNCTION_NUMBER_PCH_PMC
                 );
  //
  // PCH BIOS Spec Section 4.6 GPIO Reset Requirement
  //
  MmioOr32 (PchPmcBase + R_PCH_PMC_ETR3, (UINT32) B_PCH_PMC_ETR3_CF9GR);

  DumpResetMessage ();

  IoWrite8 (R_PCH_RST_CNT, V_PCH_RST_CNT_FULLRESET);
}

/**
  Calling this function causes the system to enter a power state for platform specific.

  @param[in] DataSize             The size of ResetData in bytes.
  @param[in] ResetData            Optional element used to introduce a platform specific reset.
                                  The exact type of the reset is defined by the EFI_GUID that follows
                                  the Null-terminated Unicode string.

**/
VOID
EFIAPI
ResetPlatformSpecific (
  IN UINTN            DataSize,
  IN VOID             *ResetData OPTIONAL
  )
{
  EFI_GUID            *GuidPtr;

  if (ResetData == NULL) {
    DEBUG ((DEBUG_ERROR, "[PeiResetSystemLib] ResetData is not available.\n"));
    return;
  }
  GuidPtr = (EFI_GUID *) ((UINT8 *) ResetData + DataSize - sizeof (EFI_GUID));
  if (CompareGuid (GuidPtr, &gPchGlobalResetGuid)) {
    PeiPchGlobalReset();
  } else {
    return;
  }
}

/**
  Calling this function causes the system to enter a power state for capsule update.

  Reset update should not return, if it returns, it means the system does
  not support capsule update.

**/
VOID
EFIAPI
EnterS3WithImmediateWake (
  VOID
  )
{
  ASSERT (FALSE);
}

/**
  The ResetSystem function resets the entire platform.

  @param[in] ResetType      The type of reset to perform.
  @param[in] ResetStatus    The status code for the reset.
  @param[in] DataSize       The size, in bytes, of ResetData.
  @param[in] ResetData      For a ResetType of EfiResetCold, EfiResetWarm, or EfiResetShutdown
                            the data buffer starts with a Null-terminated string, optionally
                            followed by additional binary data. The string is a description
                            that the caller may use to further indicate the reason for the
                            system reset.
**/
VOID
EFIAPI
ResetSystem (
  IN EFI_RESET_TYPE               ResetType,
  IN EFI_STATUS                   ResetStatus,
  IN UINTN                        DataSize,
  IN VOID                         *ResetData OPTIONAL
  )
{
  switch (ResetType) {
  case EfiResetWarm:
    ResetWarm ();
    break;

  case EfiResetCold:
    ResetCold ();
    break;

  case EfiResetShutdown:
    ResetShutdown ();
    return;

  case EfiResetPlatformSpecific:
    ResetPlatformSpecific (DataSize, ResetData);
    return;

  default:
    return;
  }

  //
  // Given we should have reset getting here would be bad
  //
  ASSERT (FALSE);
}