/** @file
  Register names for PCH private chipset register

  Conventions:

  - Prefixes:
    Definitions beginning with "R_" are registers
    Definitions beginning with "B_" are bits within registers
    Definitions beginning with "V_" are meaningful values within the bits
    Definitions beginning with "S_" are register sizes
    Definitions beginning with "N_" are the bit position
  - In general, PCH registers are denoted by "_PCH_" in register names
  - Registers / bits that are different between PCH generations are denoted by
    "_PCH_[generation_name]_" in register/bit names.
  - Registers / bits that are specific to PCH-H denoted by "_H_" in register/bit names.
    Registers / bits that are specific to PCH-LP denoted by "_LP_" in register/bit names.
    e.g., "_PCH_H_", "_PCH_LP_"
    Registers / bits names without _H_ or _LP_ apply for both H and LP.
  - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
    at the end of the register/bit names
  - Registers / bits of new devices introduced in a PCH generation will be just named
    as "_PCH_" without [generation_name] inserted.

Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/
#ifndef _PCH_REGS_PCR_H_
#define _PCH_REGS_PCR_H_

///
/// Definition for PCR base address (defined in PchReservedResources.h)
///
//#define PCH_PCR_BASE_ADDRESS            0xFD000000
//#define PCH_PCR_MMIO_SIZE               0x01000000
/**
  Definition for PCR address
  The PCR address is used to the PCR MMIO programming
**/
#define PCH_PCR_ADDRESS(Pid, Offset)    (PCH_PCR_BASE_ADDRESS | ((UINT8)(Pid) << 16) | (UINT16)(Offset))

/**
  PCH PCR boot script accessing macro
  Those macros are only available for DXE phase.
**/
#define PCH_PCR_BOOT_SCRIPT_WRITE(Width, Pid, Offset, Count, Buffer) \
          S3BootScriptSaveMemWrite (Width, PCH_PCR_ADDRESS (Pid, Offset), Count, Buffer); \
          S3BootScriptSaveMemPoll (Width, PCH_PCR_ADDRESS (Pid, Offset), Buffer, Buffer, 1, 1);

#define PCH_PCR_BOOT_SCRIPT_READ_WRITE(Width, Pid, Offset, DataOr, DataAnd) \
          S3BootScriptSaveMemReadWrite (Width, PCH_PCR_ADDRESS (Pid, Offset), DataOr, DataAnd); \
          S3BootScriptSaveMemPoll (Width, PCH_PCR_ADDRESS (Pid, Offset), DataOr, DataOr, 1, 1);


/**
  Definition for SBI PID
  The PCH_SBI_PID defines the PID for PCR MMIO programming and PCH SBI programming as well.
**/
#define  PID_DMI                          0xEF
#define  PID_ESPISPI                      0xEE
#define  PID_OPIPHY                       0xEC
#define  PID_MODPHY0                      0xEA
#define  PID_MODPHY1                      0xE9
#define  PID_OTG                          0xE5
#define  PID_SPF                          0xC9 // Available only in KBL PCH H
#define  PID_SPE                          0xE4 // Reserved in SKL PCH LP
#define  PID_SPD                          0xE3 // Reserved in SKL PCH LP
#define  PID_SPC                          0xE2
#define  PID_SPB                          0xE1
#define  PID_SPA                          0xE0
#define  PID_ICC                          0xDC
#define  PID_DSP                          0xD7
#define  PID_FIA                          0xCF
#define  PID_SERIALIO                     0xCB
#define  PID_USB2                         0xCA
#define  PID_LPC                          0xC7
#define  PID_SMB                          0xC6
#define  PID_ITSS                         0xC4
#define  PID_RTC                          0xC3
#define  PID_SCS                          0xC0 // Reserved in SKL PCH H
#define  PID_ISHBR                        0xBF
#define  PID_ISH                          0xBE
#define  PID_PSF4                         0xBD
#define  PID_PSF3                         0xBC
#define  PID_PSF2                         0xBB
#define  PID_PSF1                         0xBA
#define  PID_DCI                          0xB8
#define  PID_MMP0                         0xB0 // for SKL-LP only
#define  PID_MODPHY4                      0xB0 // for KBL-H only
#define  PID_GPIOCOM0                     0xAF
#define  PID_GPIOCOM1                     0xAE
#define  PID_GPIOCOM2                     0xAD
#define  PID_GPIOCOM3                     0xAC
#define  PID_CAM_FLS                      0xAA
#define  PID_MODPHY2                      0xA9
#define  PID_MODPHY3                      0xA8
#define  PID_CAM_CHC                      0xA1
#define  PID_CSME12                       0x9C
#define  PID_CSME0                        0x90
#define  PID_CSME_PSF                     0x8F
#define  PID_PSTH                         0x89

typedef  UINT8                            PCH_SBI_PID;

#endif