/** @file
  File to contain all the hardware specific stuff for the Smm Sw dispatch protocol.

  Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>

  SPDX-License-Identifier: BSD-2-Clause-Patent
**/

#include "PchSmmHelpers.h"
#include <Protocol/SmmCpu.h>
#include <Register/PchRegsLpc.h>
#include <Register/PchRegsPmc.h>

GLOBAL_REMOVE_IF_UNREFERENCED EFI_SMM_CPU_PROTOCOL          *mSmmCpuProtocol;

STATIC LIST_ENTRY                       mSwSmiCallbackDataBase;

//
// "SWSMI" RECORD
// Linked list data structures
//
#define SW_SMI_RECORD_SIGNATURE         SIGNATURE_32 ('S', 'W', 'S', 'M')

#define SW_SMI_RECORD_FROM_LINK(_record)  CR (_record, SW_SMI_RECORD, Link, SW_SMI_RECORD_SIGNATURE)

typedef struct {
  UINT32                                Signature;
  LIST_ENTRY                            Link;
  EFI_SMM_SW_REGISTER_CONTEXT           Context;
  EFI_SMM_HANDLER_ENTRY_POINT2          Callback;
} SW_SMI_RECORD;

GLOBAL_REMOVE_IF_UNREFERENCED CONST PCH_SMM_SOURCE_DESC mSwSourceDesc = {
  PCH_SMM_NO_FLAGS,
  {
    {
      {
        ACPI_ADDR_TYPE,
        {R_ACPI_IO_SMI_EN}
      },
      S_ACPI_IO_SMI_EN,
      N_ACPI_IO_SMI_EN_APMC
    },
    NULL_BIT_DESC_INITIALIZER
  },
  {
    {
      {
        ACPI_ADDR_TYPE,
        {R_ACPI_IO_SMI_STS}
      },
      S_ACPI_IO_SMI_STS,
      N_ACPI_IO_SMI_STS_APM
    }
  },
  {
    {
      ACPI_ADDR_TYPE,
      {R_ACPI_IO_SMI_STS}
    },
    S_ACPI_IO_SMI_STS,
    N_ACPI_IO_SMI_STS_APM
  }
};

/**
  Check the SwSmiInputValue to see if there is a duplicated one in the database

  @param[in] SwSmiInputValue      SwSmiInputValue

  @retval EFI_SUCCESS             There is no duplicated SwSmiInputValue
  @retval EFI_INVALID_PARAMETER   There is a duplicated SwSmiInputValue
**/
EFI_STATUS
SmiInputValueDuplicateCheck (
  IN UINTN  SwSmiInputValue
  )
{
  SW_SMI_RECORD   *SwSmiRecord;
  LIST_ENTRY      *LinkInDb;

  LinkInDb = GetFirstNode (&mSwSmiCallbackDataBase);
  while (!IsNull (&mSwSmiCallbackDataBase, LinkInDb)) {
    SwSmiRecord = SW_SMI_RECORD_FROM_LINK (LinkInDb);
    if (SwSmiRecord->Context.SwSmiInputValue == SwSmiInputValue) {
      return EFI_INVALID_PARAMETER;
    }
    LinkInDb = GetNextNode (&mSwSmiCallbackDataBase, &SwSmiRecord->Link);
  }

  return EFI_SUCCESS;
}

/**
  Register a child SMI source dispatch function for the specified software SMI.

  This service registers a function (DispatchFunction) which will be called when the software
  SMI source specified by RegisterContext->SwSmiCpuIndex is detected. On return,
  DispatchHandle contains a unique handle which may be used later to unregister the function
  using UnRegister().

  @param[in]  This                 Pointer to the EFI_SMM_SW_DISPATCH2_PROTOCOL instance.
  @param[in]  DispatchFunction     Function to register for handler when the specified software
                                   SMI is generated.
  @param[in, out] RegisterContext  Pointer to the dispatch function's context.
                                   The caller fills this context in before calling
                                   the register function to indicate to the register
                                   function which Software SMI input value the
                                   dispatch function should be invoked for.
  @param[out] DispatchHandle       Handle generated by the dispatcher to track the
                                   function instance.

  @retval EFI_SUCCESS            The dispatch function has been successfully
                                 registered and the SMI source has been enabled.
  @retval EFI_DEVICE_ERROR       The SW driver was unable to enable the SMI source.
  @retval EFI_INVALID_PARAMETER  RegisterContext is invalid. The SW SMI input value
                                 is not within a valid range or is already in use.
  @retval EFI_OUT_OF_RESOURCES   There is not enough memory (system or SMM) to manage this
                                 child.
  @retval EFI_OUT_OF_RESOURCES   A unique software SMI value could not be assigned
                                 for this dispatch.
**/
EFI_STATUS
EFIAPI
PchSwSmiRegister (
  IN  EFI_SMM_SW_DISPATCH2_PROTOCOL       *This,
  IN  EFI_SMM_HANDLER_ENTRY_POINT2        DispatchFunction,
  IN  EFI_SMM_SW_REGISTER_CONTEXT         *DispatchContext,
  OUT EFI_HANDLE                          *DispatchHandle
  )
{
  EFI_STATUS       Status;
  SW_SMI_RECORD    *SwSmiRecord;
  UINTN            Index;

  //
  // Return access denied if the SmmReadyToLock event has been triggered
  //
  if (mReadyToLock == TRUE) {
    DEBUG ((DEBUG_ERROR, "Register is not allowed if the SmmReadyToLock event has been triggered! \n"));
    return EFI_ACCESS_DENIED;
  }

  //
  // Find available SW SMI value if the input is -1
  //
  if (DispatchContext->SwSmiInputValue == (UINTN) -1) {
    for (Index = 1; Index < MAXIMUM_SWI_VALUE; Index++) {
      Status = SmiInputValueDuplicateCheck (Index);
      if (!EFI_ERROR (Status)) {
        DispatchContext->SwSmiInputValue = Index;
        break;
      }
    }
    if (DispatchContext->SwSmiInputValue == (UINTN) -1) {
      return EFI_OUT_OF_RESOURCES;
    }
  }
  //
  // Check if it's a valid SW SMI value.
  // The value must not bigger than 0xFF.
  // And the value must not be 0xFF sincie it's used for SmmControll protocol.
  //
  if (DispatchContext->SwSmiInputValue >= MAXIMUM_SWI_VALUE) {
    return EFI_INVALID_PARAMETER;
  }

  Status = SmiInputValueDuplicateCheck (DispatchContext->SwSmiInputValue);
  if (EFI_ERROR (Status)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Create database record and add to database
  //
  Status = gSmst->SmmAllocatePool (
                    EfiRuntimeServicesData,
                    sizeof (SW_SMI_RECORD),
                    (VOID **) &SwSmiRecord
                    );
  if (EFI_ERROR (Status)) {
    DEBUG ((DEBUG_ERROR, "Failed to allocate memory for SwSmiRecord! \n"));
    return EFI_OUT_OF_RESOURCES;
  }
  //
  // Gather information about the registration request
  //
  SwSmiRecord->Signature               = SW_SMI_RECORD_SIGNATURE;
  SwSmiRecord->Context.SwSmiInputValue = DispatchContext->SwSmiInputValue;
  SwSmiRecord->Callback                = DispatchFunction;
  //
  // Publish the S/W SMI numbers in Serial logs used for Debug build.
  //
  DEBUG ((DEBUG_INFO, "SW SMI NUM %x  Sw Record at Address 0x%X\n", SwSmiRecord->Context.SwSmiInputValue, SwSmiRecord));

  InsertTailList (&mSwSmiCallbackDataBase, &SwSmiRecord->Link);

  //
  // Child's handle will be the address linked list link in the record
  //
  *DispatchHandle = (EFI_HANDLE) (&SwSmiRecord->Link);

  return EFI_SUCCESS;
}

/**
  Unregister a child SMI source dispatch function for the specified software SMI.

  This service removes the handler associated with DispatchHandle so that it will no longer be
  called in response to a software SMI.

  @param[in] This                Pointer to the EFI_SMM_SW_DISPATCH2_PROTOCOL instance.
  @param[in] DispatchHandle      Handle of dispatch function to deregister.

  @retval EFI_SUCCESS            The dispatch function has been successfully unregistered.
  @retval EFI_INVALID_PARAMETER  The DispatchHandle was not valid.
**/
EFI_STATUS
EFIAPI
PchSwSmiUnRegister (
  IN CONST EFI_SMM_SW_DISPATCH2_PROTOCOL  *This,
  IN       EFI_HANDLE                     DispatchHandle
  )
{
  EFI_STATUS            Status;
  SW_SMI_RECORD         *RecordToDelete;

  if (DispatchHandle == 0) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Return access denied if the SmmReadyToLock event has been triggered
  //
  if (mReadyToLock == TRUE) {
    DEBUG ((DEBUG_ERROR, "UnRegister is not allowed if the SmmReadyToLock event has been triggered! \n"));
    return EFI_ACCESS_DENIED;
  }

  RecordToDelete = SW_SMI_RECORD_FROM_LINK (DispatchHandle);
  //
  // Take the entry out of the linked list
  //
  if (RecordToDelete->Signature != SW_SMI_RECORD_SIGNATURE) {
    return EFI_INVALID_PARAMETER;
  }

  RemoveEntryList (&RecordToDelete->Link);
  ZeroMem (RecordToDelete, sizeof (SW_SMI_RECORD));
  Status = gSmst->SmmFreePool (RecordToDelete);
  ASSERT_EFI_ERROR (Status);

  return EFI_SUCCESS;
}

/**
  Main entry point for an SMM handler dispatch or communicate-based callback.

  @param[in]     DispatchHandle  The unique handle assigned to this handler by SmiHandlerRegister().
  @param[in]     Context         Points to an optional handler context which was specified when the
                                 handler was registered.
  @param[in,out] CommBuffer      A pointer to a collection of data in memory that will
                                 be conveyed from a non-SMM environment into an SMM environment.
  @param[in,out] CommBufferSize  The size of the CommBuffer.

  @retval EFI_SUCCESS                         The interrupt was handled and quiesced. No other handlers
                                              should still be called.
  @retval EFI_WARN_INTERRUPT_SOURCE_QUIESCED  The interrupt has been quiesced but other handlers should
                                              still be called.
  @retval EFI_WARN_INTERRUPT_SOURCE_PENDING   The interrupt is still pending and other handlers should still
                                              be called.
  @retval EFI_INTERRUPT_PENDING               The interrupt could not be quiesced.
**/
EFI_STATUS
EFIAPI
PchSwSmiDispatcher (
  IN       EFI_HANDLE         DispatchHandle,
  IN CONST VOID               *Context,
  IN OUT   VOID               *CommBuffer,
  IN OUT   UINTN              *CommBufferSize
  )
{
  EFI_STATUS                            Status;
  EFI_SMM_SAVE_STATE_IO_INFO            SmiIoInfo;
  UINTN                                 CpuIndex;
  SW_SMI_RECORD                         *SwSmiRecord;
  LIST_ENTRY                            *LinkInDb;
  EFI_SMM_SW_CONTEXT                    SwSmiCommBuffer;
  UINTN                                 SwSmiCommBufferSize;

  SwSmiCommBufferSize      = sizeof (EFI_SMM_SW_CONTEXT);
  //
  // The value in DataPort might not be accurate in multiple thread environment.
  // There might be racing condition for R_PCH_IO_APM_STS port.
  // Therefor, this is just for reference.
  //
  SwSmiCommBuffer.DataPort = IoRead8 (R_PCH_IO_APM_STS);

  for (CpuIndex = 0; CpuIndex < gSmst->NumberOfCpus; CpuIndex++) {
    Status = mSmmCpuProtocol->ReadSaveState (
                                mSmmCpuProtocol,
                                sizeof (EFI_SMM_SAVE_STATE_IO_INFO),
                                EFI_SMM_SAVE_STATE_REGISTER_IO,
                                CpuIndex,
                                &SmiIoInfo
                                );
    //
    // If this is not the SMI source, skip it.
    //
    if (EFI_ERROR (Status)) {
      continue;
    }
    //
    // If the IO address is not "BYTE" "WRITE" to "R_PCH_IO_APM_CNT (0xB2)", skip it.
    //
    if ((SmiIoInfo.IoPort != R_PCH_IO_APM_CNT) ||
        (SmiIoInfo.IoType != EFI_SMM_SAVE_STATE_IO_TYPE_OUTPUT) ||
        (SmiIoInfo.IoWidth != EFI_SMM_SAVE_STATE_IO_WIDTH_UINT8))
    {
      continue;
    }
    //
    // If the IO data is used for SmmControl protocol, skip it.
    //
    if (SmiIoInfo.IoData == 0xFF) {
      continue;
    }

    SwSmiCommBuffer.SwSmiCpuIndex = CpuIndex;
    SwSmiCommBuffer.CommandPort   = (UINT8) SmiIoInfo.IoData;

    LinkInDb = GetFirstNode (&mSwSmiCallbackDataBase);
    while (!IsNull (&mSwSmiCallbackDataBase, LinkInDb)) {
      SwSmiRecord = SW_SMI_RECORD_FROM_LINK (LinkInDb);
      if (SwSmiRecord->Context.SwSmiInputValue == SmiIoInfo.IoData) {
        SwSmiRecord->Callback ((EFI_HANDLE) &SwSmiRecord->Link, &SwSmiRecord->Context, &SwSmiCommBuffer, &SwSmiCommBufferSize);
      }
      LinkInDb = GetNextNode (&mSwSmiCallbackDataBase, &SwSmiRecord->Link);
    }
  }

  return EFI_SUCCESS;
}

/**
  Init required protocol for Pch Sw Dispatch protocol.
**/
VOID
PchSwDispatchInit (
  VOID
  )
{
  EFI_STATUS                            Status;
  EFI_HANDLE                            DispatchHandle;
  DATABASE_RECORD                       Record;

  //
  // Locate PI SMM CPU protocol
  //
  Status = gSmst->SmmLocateProtocol (&gEfiSmmCpuProtocolGuid, NULL, (VOID **)&mSmmCpuProtocol);
  ASSERT_EFI_ERROR (Status);

  //
  // Initialize SW SMI Callback DataBase
  //
  InitializeListHead (&mSwSmiCallbackDataBase);

  //
  // Insert SwSmi handler to PchSmmCore database
  // There will always be one SwType record in PchSmmCore database
  //
  ZeroMem (&Record, sizeof (DATABASE_RECORD));
  Record.Signature    = DATABASE_RECORD_SIGNATURE;
  Record.Callback     = PchSwSmiDispatcher;
  Record.ProtocolType = SwType;

  CopyMem (&Record.SrcDesc, &mSwSourceDesc, sizeof (PCH_SMM_SOURCE_DESC));

  DispatchHandle      = NULL;
  Status = SmmCoreInsertRecord (
             &Record,
             &DispatchHandle
             );
  ASSERT_EFI_ERROR (Status);
}