/** @file Register names for PCH SPI device. Conventions: - Register definition format: Prefix_[GenerationName]_[ComponentName]_SubsystemName_RegisterSpace_RegisterName - Prefix: Definitions beginning with "R_" are registers Definitions beginning with "B_" are bits within registers Definitions beginning with "V_" are meaningful values within the bits Definitions beginning with "S_" are register size Definitions beginning with "N_" are the bit position - [GenerationName]: Three letter acronym of the generation is used (e.g. SKL,KBL,CNL etc.). Register name without GenerationName applies to all generations. - [ComponentName]: This field indicates the component name that the register belongs to (e.g. PCH, SA etc.) Register name without ComponentName applies to all components. Register that is specific to -LP denoted by "_PCH_LP_" in component name. - SubsystemName: This field indicates the subsystem name of the component that the register belongs to (e.g. PCIE, USB, SATA, GPIO, PMC etc.). - RegisterSpace: MEM - MMIO space register of subsystem. IO - IO space register of subsystem. PCR - Private configuration register of subsystem. CFG - PCI configuration space register of subsystem. - RegisterName: Full register name. Copyright (c) 2021, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent **/ #ifndef _SPI_REGS_H_ #define _SPI_REGS_H_ // // SPI Registers // #define R_SPI_CFG_BAR0 0x10 #define B_SPI_CFG_BAR0_MASK 0x0FFF #define R_SPI_CFG_BDE 0xD8 #define R_SPI_CFG_BC 0xDC #define S_SPI_CFG_BC 4 #define N_SPI_CFG_BC_ASE_BWP 11 #define B_SPI_CFG_BC_ASE_BWP BIT11 #define N_SPI_CFG_BC_ASYNC_SS 10 #define B_SPI_CFG_BC_ASYNC_SS BIT10 #define N_SPI_CFG_BC_SYNC_SS 8 #define B_SPI_CFG_BC_SYNC_SS BIT8 #define B_SPI_CFG_BC_BILD BIT7 #define B_SPI_CFG_BC_BBS BIT6 ///< Boot BIOS strap #define N_SPI_CFG_BC_BBS 6 #define V_SPI_CFG_BC_BBS_SPI 0 ///< Boot BIOS strapped to SPI #define B_SPI_CFG_BC_EISS BIT5 ///< Enable InSMM.STS #define B_SPI_CFG_BC_TSS BIT4 #define B_SPI_CFG_BC_SRC (BIT3 | BIT2) #define N_SPI_CFG_BC_SRC 2 #define V_SPI_CFG_BC_SRC_PREF_DIS_CACHE_DIS 0x01 ///< No prefetching and no caching #define B_SPI_CFG_BC_LE BIT1 ///< Lock Enable #define N_SPI_CFG_BC_BLE 1 #define B_SPI_CFG_BC_WPD BIT0 ///< Write Protect Disable // // BIOS Flash Program Registers (based on SPI_BAR0) // #define R_SPI_MEM_HSFSC 0x04 ///< Hardware Sequencing Flash Status and Control Register(32bits) #define B_SPI_MEM_HSFSC_FDBC_MASK 0x3F000000 ///< Flash Data Byte Count ( <= 64), Count = (Value in this field) + 1. #define N_SPI_MEM_HSFSC_FDBC 24 #define B_SPI_MEM_HSFSC_CYCLE_MASK 0x001E0000 ///< Flash Cycle. #define N_SPI_MEM_HSFSC_CYCLE 17 #define V_SPI_MEM_HSFSC_CYCLE_READ 0 ///< Flash Cycle Read #define V_SPI_MEM_HSFSC_CYCLE_WRITE 2 ///< Flash Cycle Write #define V_SPI_MEM_HSFSC_CYCLE_4K_ERASE 3 ///< Flash Cycle 4K Block Erase #define V_SPI_MEM_HSFSC_CYCLE_64K_ERASE 4 ///< Flash Cycle 64K Sector Erase #define V_SPI_MEM_HSFSC_CYCLE_READ_SFDP 5 ///< Flash Cycle Read SFDP #define V_SPI_MEM_HSFSC_CYCLE_READ_JEDEC_ID 6 ///< Flash Cycle Read JEDEC ID #define V_SPI_MEM_HSFSC_CYCLE_WRITE_STATUS 7 ///< Flash Cycle Write Status #define V_SPI_MEM_HSFSC_CYCLE_READ_STATUS 8 ///< Flash Cycle Read Status #define B_SPI_MEM_HSFSC_CYCLE_FGO BIT16 ///< Flash Cycle Go. #define B_SPI_MEM_HSFSC_FLOCKDN BIT15 ///< Flash Configuration Lock-Down #define B_SPI_MEM_HSFSC_FDV BIT14 ///< Flash Descriptor Valid, once valid software can use hareware sequencing regs #define B_SPI_MEM_HSFSC_FDOPSS BIT13 ///< Flash Descriptor Override Pin-Strap Status #define B_SPI_MEM_HSFSC_WRSDIS BIT11 ///< Write Status Disable #define B_SPI_MEM_HSFSC_SAF_MODE_ACTIVE BIT7 ///< Indicates flash is attached either directly to the PCH via the SPI bus or EC/BMC #define B_SPI_MEM_HSFSC_SCIP BIT5 ///< SPI cycle in progress #define B_SPI_MEM_HSFSC_SAF_DLE BIT4 ///< SAF Data length error #define B_SPI_MEM_HSFSC_SAF_ERROR BIT3 ///< SAF Error #define B_SPI_MEM_HSFSC_AEL BIT2 ///< Access Error Log #define B_SPI_MEM_HSFSC_FCERR BIT1 ///< Flash Cycle Error #define B_SPI_MEM_HSFSC_FDONE BIT0 ///< Flash Cycle Done #define R_SPI_MEM_FADDR 0x08 ///< SPI Flash Address #define B_SPI_MEM_FADDR_MASK 0x07FFFFFF ///< SPI Flash Address Mask (0~26bit) #define R_SPI_MEM_DLOCK 0x0C ///< Discrete Lock Bits #define B_SPI_MEM_DLOCK_PR0LOCKDN BIT8 ///< PR0LOCKDN #define R_SPI_MEM_FDATA00 0x10 ///< SPI Data 00 (32 bits) #define R_SPI_MEM_FRAP 0x50 ///< Flash Region Access Permissions Register #define B_SPI_MEM_FRAP_BRWA_MASK 0x0000FF00 ///< BIOS Region Write Access MASK, Region0~7 - 0: Flash Descriptor; 1: BIOS; 2: ME; 3: GbE; 4: PlatformData #define N_SPI_MEM_FRAP_BRWA 8 ///< BIOS Region Write Access bit position #define B_SPI_MEM_FRAP_BRRA_MASK 0x000000FF ///< BIOS Region Read Access MASK, Region0~7 - 0: Flash Descriptor; 1: BIOS; 2: ME; 3: GbE; 4: PlatformData #define B_SPI_MEM_FRAP_BMRAG_MASK 0x00FF0000 ///< BIOS Master Read Access Grant #define B_SPI_MEM_FRAP_BMWAG_MASK 0xFF000000 ///< BIOS Master Write Access Grant #define R_SPI_MEM_FREG0_FLASHD 0x54 ///< Flash Region 0(Flash Descriptor)(32bits) #define R_SPI_MEM_FREG3_GBE 0x60 ///< Flash Region 3(GbE)(32bits) #define S_SPI_MEM_FREGX 4 ///< Size of Flash Region register #define B_SPI_MEM_FREGX_LIMIT_MASK 0x7FFF0000 ///< Flash Region Limit [30:16] represents [26:12], [11:0] are assumed to be FFFh #define N_SPI_MEM_FREGX_LIMIT 16 ///< Region limit bit position #define N_SPI_MEM_FREGX_LIMIT_REPR 12 ///< Region limit bit represents position #define B_SPI_MEM_FREGX_BASE_MASK 0x00007FFF ///< Flash Region Base, [14:0] represents [26:12] #define N_SPI_MEM_FREGX_BASE 0 ///< Region base bit position #define N_SPI_MEM_FREGX_BASE_REPR 12 ///< Region base bit represents position #define R_SPI_MEM_PR0 0x84 ///< Protected Region 0 Register #define S_SPI_MEM_PRX 4 ///< Protected Region X Register size #define B_SPI_MEM_PRX_WPE BIT31 ///< Write Protection Enable #define B_SPI_MEM_PRX_PRL_MASK 0x7FFF0000 ///< Protected Range Limit Mask, [30:16] here represents upper limit of address [26:12] #define N_SPI_MEM_PRX_PRL 16 ///< Protected Range Limit bit position #define B_SPI_MEM_PRX_RPE BIT15 ///< Read Protection Enable #define B_SPI_MEM_PRX_PRB_MASK 0x00007FFF ///< Protected Range Base Mask, [14:0] here represents base limit of address [26:12] #define N_SPI_MEM_PRX_PRB 0 ///< Protected Range Base bit position #define R_SPI_MEM_FDOC 0xB4 ///< Flash Descriptor Observability Control Register(32 bits) #define B_SPI_MEM_FDOC_FDSS_MASK (BIT14 | BIT13 | BIT12) ///< Flash Descritor Section Select #define V_SPI_MEM_FDOC_FDSS_FSDM 0x0000 ///< Flash Signature and Descriptor Map #define V_SPI_MEM_FDOC_FDSS_COMP 0x1000 ///< Component #define V_SPI_MEM_FDOC_FDSS_MSTR 0x3000 ///< Master #define B_SPI_MEM_FDOC_FDSI_MASK 0x0FFC ///< Flash Descriptor Section Index #define R_SPI_MEM_FDOD 0xB8 ///< Flash Descriptor Observability Data Register(32 bits) #define R_SPI_MEM_SFDP0_VSCC0 0xC4 ///< Vendor Specific Component Capabilities Register(32 bits) #define B_SPI_MEM_SFDPX_VSCCX_CPPTV BIT31 ///< Component Property Parameter Table Valid #define B_SPI_MEM_SFDP0_VSCC0_VCL BIT30 ///< Vendor Component Lock #define B_SPI_MEM_SFDPX_VSCCX_EO_64K BIT29 ///< 64k Erase valid (EO_64k_valid) #define R_SPI_MEM_SFDP1_VSCC1 0xC8 ///< Vendor Specific Component Capabilities Register(32 bits) #endif