/****************************************************************************** * * Copyright(c) 2015 - 2019 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #define CONFIG_SINGLE_IMG /***** temporarily flag *******/ /*#define CONFIG_NO_FW*/ /*#define CONFIG_DISABLE_ODM*/ #define RTW_WKARD_CORE_RSSI_V1 #ifdef RTW_WKARD_CORE_RSSI_V1 #define CONFIG_RX_PSTS_PER_PKT #define CONFIG_SIGNAL_STAT_PROCESS /*#define DBG_RX_SIGNAL_DISPLAY_PROCESSING*/ #define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "rtw_ap" #endif #ifndef DBG_MEM_ALLOC #define DBG_MEM_ALLOC #define DBG_PHL_MEM_ALLOC #define DBG_HAL_MAC_MEM_MOINTOR #define DBG_HAL_MEM_MOINTOR #endif /*#define CONFIG_PHL_USE_KMEM_ALLOC*/ /* * Work around Config */ #define RTW_WKARD_DIS_PROBE_REQ_RPT_TO_HOSTAPD /* * Public General Config */ #define AUTOCONF_INCLUDED #define DRV_NAME "rtl8852bu" #define CONFIG_USB_HCI /* * Wi-Fi Functions Config */ #define CONFIG_80211N_HT #define CONFIG_80211AC_VHT #define CONFIG_80211AX_HE #ifdef CONFIG_80211AC_VHT #ifndef CONFIG_80211N_HT #define CONFIG_80211N_HT #endif #endif #ifdef CONFIG_80211AX_HE #ifndef CONFIG_80211N_HT #define CONFIG_80211N_HT #endif #ifndef CONFIG_80211AC_VHT #define CONFIG_80211AC_VHT #endif #endif #define CONFIG_BEAMFORMING #ifdef CONFIG_BEAMFORMING /*#define RTW_WKARD_TX_DISABLE_BFEE*/ #endif /* set CONFIG_IOCTL_CFG80211 from Makefile */ #ifdef CONFIG_IOCTL_CFG80211 /* * Indecate new sta asoc through cfg80211_new_sta * If kernel version >= 3.2 or * version < 3.2 but already apply cfg80211 patch, * RTW_USE_CFG80211_STA_EVENT must be defiend! */ /* Set RTW_USE_CFG80211_STA_EVENT from Makefile */ /* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */ #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER /* #define CONFIG_DEBUG_CFG80211 */ #define CONFIG_SET_SCAN_DENY_TIMER #endif /* #define CONFIG_TX_AMSDU */ #ifdef CONFIG_TX_AMSDU #define CONFIG_TX_AMSDU_SW_MODE 1 #endif #define CONFIG_HW_RTS /* * Internal General Config */ #define CONFIG_EMBEDDED_FWIMG #ifdef CONFIG_EMBEDDED_FWIMG #define LOAD_FW_HEADER_FROM_DRIVER #endif /* #define CONFIG_FILE_FWIMG */ /*#define CONFIG_XMIT_ACK*/ #ifdef CONFIG_XMIT_ACK #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK #endif /*#define CONFIG_RECV_REORDERING_CTRL*/ #define CONFIG_USB_INTERRUPT_IN_PIPE /* #define CONFIG_SIGNAL_STAT_PROCESS */ #ifdef CONFIG_POWER_SAVING #define CONFIG_IPS #ifdef CONFIG_IPS #define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog. */ /* #define CONFIG_FWLPS_IN_IPS */ #endif #define CONFIG_LPS #if defined(CONFIG_LPS) #define CONFIG_LPS_LCLK #endif #ifdef CONFIG_LPS_LCLK #ifdef CONFIG_POWER_SAVING /* #define CONFIG_XMIT_THREAD_MODE */ #endif /* CONFIG_POWER_SAVING */ #ifndef CONFIG_SUPPORT_USB_INT #define LPS_RPWM_WAIT_MS 300 #define CONFIG_DETECT_CPWM_BY_POLLING #endif /* !CONFIG_SUPPORT_USB_INT */ /* #define DBG_CHECK_FW_PS_STATE */ #endif /* CONFIG_LPS_LCLK */ #ifdef CONFIG_LPS /*#define CONFIG_WMMPS_STA*/ #endif /* CONFIG_LPS */ #endif /*CONFIG_POWER_SAVING*/ #ifdef CONFIG_POWER_SAVE /*#define CONFIG_RTW_IPS*/ /*#define CONFIG_RTW_LPS*/ #endif #ifdef CONFIG_WOWLAN #define CONFIG_GTK_OL /* #define CONFIG_ARP_KEEP_ALIVE */ #endif /* CONFIG_WOWLAN */ #ifdef CONFIG_GPIO_WAKEUP #ifndef WAKEUP_GPIO_IDX #define WAKEUP_GPIO_IDX 10 /* WIFI Chip Side */ #endif /*!WAKEUP_GPIO_IDX*/ #endif /* CONFIG_GPIO_WAKEUP */ /* before link */ /* #define CONFIG_ANTENNA_DIVERSITY */ /* after link */ #ifdef CONFIG_ANTENNA_DIVERSITY #define CONFIG_HW_ANTENNA_DIVERSITY #endif /*#else*/ /* CONFIG_MP_INCLUDED */ /*#endif*/ /* CONFIG_MP_INCLUDED */ #define CONFIG_AP_MODE #ifdef CONFIG_AP_MODE /* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */ #if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN) #undef CONFIG_INTERRUPT_BASED_TXBCN #endif #ifdef CONFIG_INTERRUPT_BASED_TXBCN /* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */ #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR #endif #define CONFIG_NATIVEAP_MLME #ifndef CONFIG_NATIVEAP_MLME #define CONFIG_HOSTAPD_MLME #endif /*#define CONFIG_FIND_BEST_CHANNEL*/ #endif #define CONFIG_P2P #ifdef CONFIG_P2P /* The CONFIG_WFD is for supporting the Wi-Fi display */ #define CONFIG_WFD #define CONFIG_P2P_REMOVE_GROUP_INFO /* #define CONFIG_DBG_P2P */ #define CONFIG_P2P_PS /* #define CONFIG_P2P_IPS */ #define CONFIG_P2P_OP_CHK_SOCIAL_CH #define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */ /*#define CONFIG_P2P_INVITE_IOT*/ #endif /* Added by Kurt 20110511 */ #ifdef CONFIG_TDLS #define CONFIG_TDLS_DRIVER_SETUP /* #ifndef CONFIG_WFD #define CONFIG_WFD #endif */ /* #define CONFIG_TDLS_AUTOSETUP */ #define CONFIG_TDLS_AUTOCHECKALIVE #define CONFIG_TDLS_CH_SW /* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */ #endif #define CONFIG_SKB_COPY /* amsdu */ /*#define CONFIG_RTW_LED*/ #ifdef CONFIG_RTW_LED #define CONFIG_RTW_SW_LED #ifdef CONFIG_RTW_SW_LED /* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */ #endif #endif /* CONFIG_RTW_LED */ #define CONFIG_GLOBAL_UI_PID /*#define CONFIG_RTW_80211K*/ /*#define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */ /*#define CONFIG_RESUME_IN_WORKQUEUE */ /*#define CONFIG_SET_SCAN_DENY_TIMER */ #define CONFIG_LONG_DELAY_ISSUE /* #define CONFIG_SIGNAL_DISPLAY_DBM */ /*display RX signal with dbm */ #ifdef CONFIG_SIGNAL_DISPLAY_DBM /* #define CONFIG_BACKGROUND_NOISE_MONITOR */ #endif /* * Interface Related Config */ #ifndef CONFIG_MINIMAL_MEMORY_USAGE #define CONFIG_USB_TX_AGGREGATION #define CONFIG_USB_RX_AGGREGATION #endif #ifndef CONFIG_DYNAMIC_RX_BUF #define CONFIG_DYNAMIC_RX_BUF #endif /* #define CONFIG_REDUCE_USB_TX_INT*/ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */ /* * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now! */ /* #define CONFIG_USE_USB_BUFFER_ALLOC_TX*/ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */ /* #define CONFIG_USE_USB_BUFFER_ALLOC_RX*/ /* For RX path */ /* * USB VENDOR REQ BUFFER ALLOCATION METHOD * if not set we'll use function local variable (stack memory) */ /* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */ #define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC #define CONFIG_USB_VENDOR_REQ_MUTEX #define CONFIG_VENDOR_REQ_RETRY /* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ*/ /* * If bus rate is lower than Wi-Fi phy rate, it probably causes unstable * throughput for rx. So disable AMSDU may be suggested by SD1. */ /* #define CONFIG_DISBALE_RX_AMSDU_FOR_BUS_LOW_SPEED */ /* * HAL Related Config */ #define CONFIG_RX_PACKET_APPEND_FCS #define DISABLE_BB_RF 0 #ifdef CONFIG_MP_INCLUDED #define MP_DRIVER 1 /* #undef CONFIG_USB_TX_AGGREGATION #undef CONFIG_USB_RX_AGGREGATION */ #else #define MP_DRIVER 0 #endif /* * Platform Related Config */ #if defined(CONFIG_PLATFORM_ACTIONS_ATM702X) #ifdef CONFIG_USB_TX_AGGREGATION #undef CONFIG_USB_TX_AGGREGATION #endif #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX #define CONFIG_USE_USB_BUFFER_ALLOC_TX #endif #ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX #define CONFIG_USE_USB_BUFFER_ALLOC_RX #endif #endif #ifdef CONFIG_USB_TX_AGGREGATION /* #define CONFIG_TX_EARLY_MODE */ #endif #define MAX_XMITBUF_SZ 20480 #define NR_XMITBUFF 4 #define MAX_MGNT_XMITBUF_SZ 1536 #define NR_MGNT_XMITBUFF 32 #define MAX_RECVBUF_SZ 32768 #define NR_RECVBUFF 128 #define NR_RECV_URB 8 /* * Debug Related Config */ #define RTW_DETECT_HANG #define DBG 1 /*#define DBG_CONFIG_ERROR_DETECT*/ /* #define CONFIG_DIS_UPHY */ /* #define DBG_CONFIG_ERROR_DETECT_INT #define DBG_CONFIG_ERROR_RESET #define DBG_IO #define DBG_DELAY_OS #define DBG_MEM_ALLOC #define DBG_IOCTL #define DBG_TX #define DBG_XMIT_BUF #define DBG_XMIT_BUF_EXT #define DBG_TX_DROP_FRAME #define DBG_RX_DROP_FRAME #define DBG_RX_SEQ #define DBG_RX_SIGNAL_DISPLAY_PROCESSING #define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap" #define DBG_ROAMING_TEST #define DBG_HAL_INIT_PROFILING #define DBG_MEMORY_LEAK */ /*#define DBG_FW_DEBUG_MSG_PKT*/ /* FW use this feature to tx debug broadcast pkt. This pkt include FW debug message*/