function 1: modify ddr.bin file from ddrbin_param.txt. 1) modify 'ddrbin_param.txt', set ddr frequency, uart info etc what you want. If want to keep items default, please keep these items blank. 2) run 'ddrbin_tool' with argument 1: ddrbin_param.txt, argument 2: ddr bin file. like: ./ddrbin_tool ddrbin_param.txt px30_ddr_333MHz_v1.13.bin function 2: get ddr.bin file config to gen_param.txt file If want to get ddrbin file config, please run like that: ./ddrbin_tool -g gen_param.txt px30_ddr_333MHz_v1.15.bin The config will show in gen_param.txt. Note: The function 1 and function 2 are two separate functions The gen_param.txt file which is generated by function 2 no need use in function 1. The detail information as following: * support ddrbin version +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | platform | uart info | ddr freq | ssmod | DDR 2T | sr pd | drv, odt, Vref etc| dis training info | eye sacn | res space remap| +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | PX30/RK3326 | V1.11 | X | X | V1.12 | V1.15 | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK1808 | V1.03 | V1.03 | X | V1.03 | V1.04 | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK322x | V1.08 | V1.08 | X | V1.09 | X | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK322xh | V1.14 | X | X | V1.16 | V1.17 | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3288 | V1.07 | X | X | V1.08 | X | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3308 | V1.28 | V1.28 | X | V1.29 | V1.30 | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3368 | V2.04 | V2.04 | X | V2.05 | X | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3328 | V1.14 | X | X | V1.16 | V1.17 | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3399 | V1.25 | X | V1.25 | X | X | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3399PRO NPU | V1.03 | V1.03 | X | V1.03 | X | X | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RV1126/RV1109 | V1.00 | V1.00 | V1.05 | V1.00 | V1.05 | V1.05 | X | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3566/RK3568 | V1.00 | V1.00 | V1.06 | V1.00 | V1.00 | V1.06 | V1.07 | X | X | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ | RK3588 | V1.00 | V1.00 | X | V1.00 | V1.00 | V1.00 | V1.03 | V1.06 | V1.06 | +---------------+-----------+----------+-------+--------+-------+-------------------+-------------------+----------+----------------+ * UART info uart id: uart number. 0 for uart0, 1 for uart1, 2 for uart2..., 0xf will disable uart. uart iomux: uart iomux info, 0 for uartn_m0, 1 for uartn_m1, 2 for uartn_m2...(like uart2_m0, uart2_m1,uart2_m2), or 1 for uartn_a, 2 for uartn_b, 3 for uartn_c.(like uar2a, uart2b, uart2c). uart baudrate: uart baudrate should be 115200 or 1500000. * disable print training information dis_printf_training: 1: will disabled print training information; 0: will enable print training information. * remap pcie 100M reg to DDR res_space_remap: 1: will remap pcie 100M reg to DDR memory space. * DDR eye scanning 1) eye_2d_scan_en: 1: will enable 2D eye scanning for debug purpose, vref and skew eye scanning. 2) wr_vref_scan_en: 1: enable vref scan and use scanning result for write. 3) rd_vref_scan_en: 1: enable vref scan and use scanning result for read. * DDR (final) freq ddr2_freq: ddr2 frequency, unit:MHz. lp2_freq: lpddr2 frequency, unit:MHz. ddr3_freq: ddr3 frequency, unit:MHz. lp3_freq: lpddr3 frequency, unit:MHz. ddr4_freq: ddr4 frequency, unit:MHz. lp4_freq: lpddr4 frequency, unit:MHz. lp4x_freq: lpddr4x frequency, unit:MHz. lp5_freq: lpddr5 frequency, unit:MHz. For RV1126/RV1109, RK3566/RK3568, RK3588 those frequencies are the final freq in loader. +---------------+--------------------------------------------------------+ | platform | support frequencies | +---------------+--------------------------------------------------------+ | PX30/RK3326 | X | +---------------+--------------------------------------------------------+ | RK1808 | 333,400,533,666,786,933 | +---------------+--------------------------------------------------------+ | RK322x | not larger than 800 | +---------------+--------------------------------------------------------+ | RK322xh | X | +---------------+--------------------------------------------------------+ | RK3288 | X | +---------------+--------------------------------------------------------+ | RK3308 | 393,451,589 | +---------------+--------------------------------------------------------+ | RK3368 | DDR3 not larger than 800, LP3 not larger than 666 | +---------------+--------------------------------------------------------+ | RK3328 | X | +---------------+--------------------------------------------------------+ | RK3399 | X | +---------------+--------------------------------------------------------+ | RK3399PRO NPU | 333,400,533,666,786,933 | +---------------+--------------------------------------------------------+ | RV1126/RV1109 | 328,396,528,664,784,924,1056 | +---------------+--------------------------------------------------------+ | RK3566/RK3568 | 324,396,528,630,780,920,1056,1184,1332,1560 | +---------------+--------------------------------------------------------+ | RK3588 | LP4/LP4x [306.5MHz - 2133MHz]; LP5: [400MHz - 2750MHz] | +---------------+--------------------------------------------------------+ * DDR frequencies(add more) ddr2_f1_freq_mhz: ddr2 frequency number 1, unit:MHz. ddr2_f2_freq_mhz: ddr2 frequency number 2, unit:MHz. ddr2_f3_freq_mhz: ddr2 frequency number 3, unit:MHz. ddr2_f4_freq_mhz: ddr2 frequency number 4, unit:MHz. ddr2_f5_freq_mhz: ddr2 frequency number 5, unit:MHz. ... ddr*_f*_freq_mhz/lp*_f*_freq_mhz: Only RV1126/RV1109, RK3566/RK3568, RK3588 used. The program will initialize dram by following order. for example: ddr4_f1_freq_mhz --> ddr4_f2_freq_mhz --> ddr4_f3_freq_mhz --> ddr4_freq. And the final frequency is ddr4_freq to boot system. The ddr frequency table in kernel dts/dtsi file need correspond to these frequencies. So it is better to arrange the frequency values in order as above. That means the max freq is in final freq(lp*/ddr*_freq) and the min freq is in 'ddr*/lp*_f1_freq_mhz'. Such as: ddr*/lp*_f1_freq_mhz < ddr*/lp*_f2_freq_mhz < ddr*/lp*_f3_freq_mhz < lp*/ddr*_freq(the final freq) For example: ... ddr4_freq=1560 ... ddr4_f1_freq_mhz=324 ddr4_f2_freq_mhz=528 ddr4_f3_freq_mhz=780 ... * SR PD idle sr_idle: auto self-refresh mode delay time. pd_idle: auto power-down mode delay time. * DDR 2T ddr_2t: ddr 2T timing mode. 1: enable ddr 2T, 0: disable ddr 2T. * PLL ssmod These parameters are about Spread Spectrum Modulator(ssmod) for PLL. ssmod_downspread: ssmod work mode. 0: down spread, 1: center spread. ssmod_div: Divider required to set the modulation frequency. RK3308 suggests to ssmod_div=2, others platforms suggest to ssmod_div=5. ssmod_spread: spread amplitude % = 0.1 * ssmod_spread; 0: disable ssmod, others will enable ssmod, max to 0x1f. * driver strength phy_ddr*_dq_drv_when_odten_ohm: The PHY DQ/DQS driver strength(write direction) when DRAM odt on. unit: ohm. phy_ddr*_ca_drv_when_odten_ohm: The PHY CMD/ADDR driver strength when DRAM odt on. unit: ohm. phy_ddr*_clk_drv_when_odten_ohm: The PHY clock driver strength when DRAM odt on. unit: ohm. ddr*_dq_drv_when_odten_ohm: The DRAM DQ/DQS driver strength(read direction) when PHY odt on. unit: ohm. phy_ddr*_dq_drv_when_odtoff_ohm: The PHY DQ/DQS driver strength(write direction) when DRAM odt off. unit: ohm. phy_ddr*_ca_drv_when_odtoff_ohm: The PHY CMD/ADDR driver strength when DRAM odt off. unit: ohm. phy_ddr*_clk_drv_when_odtoff_ohm: The PHY clock driver strength when DRAM odt off. unit: ohm. ddr*_dq_drv_when_odtoff_ohm: The DRAM DQ/DQS driver strength(read direction) when PHY odt off. unit: ohm. The phy side driver strength support value as follows: +---------------+-------------------+-------------------+--------------+-----------------+----------------+----------------+-------------+ | platform | DDR3 | DDR4 | LP3 | LP4 | LP4X pull up | LP4X pull down | LP5 | +---------------+-------------------+-------------------+--------------+-----------------+----------------+----------------+-------------+ | | 455,230,153,115, | 482,244,162,122, | | 501,253,168,126,| | | | | | 91,76,65,57,51,46,| 97,81,69,61,54,48,| | 101,84,72,63,56,| | | | | RV1126/RV1109 | 41,38,35,32,30,28,| 44,40,37,34,32,30,| follow DDR4 | 50,46,42,38,36, | follow LP4 | follow LP4 | X | | | 27,25,24,23,22,21,| 28,27,25,24,23,22,| | 33,31,29,28,26, | | | | | | 20 | 21 | | 25,24,23,22 | | | | +---------------+-------------------+-------------------+--------------+-----------------+----------------+----------------+-------------+ | | 500,250,167,125, | 556,279,185,139, | | 576,289,192,144,| 646,323,215, | 513,259,172, | | | | 100,83,71,63,56, | 111,93,79,69,62, | | 115,96,82,72,64,| 162,129,108,92,| 130,104,86,74, | | | RK3566/RK3568 | 50,45,41,38,36,33,| 55,50,46,42,39,37,| follow DDR4 | 57,52,48,44,41, | 81,72,65,59,54,| 65,58,52,47,43,| X | | | 31,29,28,26,25,24,| 34,32,31,29,27,26,| | 38,36,34,32,30, | 50,46,43,40,38,| 40,37,35,32,30,| | | | 23,22 | 25,24 | | 28,27,26,25 | 36,34,32,31,29,| 29,27,26,25,24,| | | | | | | | 28 | 23 | | +---------------+-------------------+-------------------+--------------+-----------------+----------------+----------------+-------------+ | RK3588 | X | X | X | 240,120,80,60, | follow LP4 | follow LP4 | follow LP4 | | | | | | 48,40,34,30 | | | | +---------------+-------------------+-------------------+--------------+-----------------+----------------+----------------+-------------+ The DRAM side driver strength support value as follows: +---------------+-------------------+-------------------+----------------+----------------------+----------------+-------------+ | platform | DDR3 | DDR4 | LP3 | LP4 | LP4X | LP5 | +---------------+-------------------+-------------------+----------------+----------------------+----------------+-------------+ | all | 40,34 | 34,48 | 34,40,48,60,80 | 40,48,60,80,120,240 | follow LP4 | follow LP4 | +---------------+-------------------+-------------------+----------------+----------------------+----------------+-------------+ * ODT phy_ddr*_odt_ohm: The PHY ODT strength(read direction). unit: ohm. ddr*_odt_ohm: The DRAM ODT strength(write direction). unit: ohm. phy_ddr*_odt_pull_up_en: 1: enable PHY pull up odt. 0: disable phy_ddr*_odt_pull_dn_en: 1: enable PHY pull down odt. 0: disable phy_ddr*_odten_freq_mhz: The PHY odt enable when larger than this frequency. unit: MHz. ddr*_odten_freq_mhz: The DRAM odt(DQ/DQS) enable when larger than this frequency. unit: MHz. The phy side ODT support value as follows: The ODT "0" means disabled ODT. +---------------+-------------------+--------------------+--------------+-------------------+----------------+----------------+-------------+ | platform | DDR3 | DDR4 | LP3 | LP4 | LP4X pull up | LP4X pull down | LP5 | +---------------+-------------------+--------------------+--------------+-------------------+----------------+----------------+-------------+ | | 0,561,282,188,141,| 0,586,294,196,148, | | 0,604,303,202,152,| | | | | | 113,94,81,72,64, | 118,99,58,76,67,60,| | 122,101,87,78,69, | | | | | RV1126/RV1109 | 58,52,48,44,41, | 55,50,46,43,40,38, | follow DDR4 | 62,56,52,48,44,41,| follow LP4 | follow LP4 | X | | | 38,37,34,32,31,29,| 36,34,32,31,29,28, | | 39,37,35,33,32,30,| | | | | | 28,27,25 | 27 | | 29,27 | | | | +---------------+-------------------+--------------------+--------------+-------------------+----------------+----------------+-------------+ | | 0,500,250,167,125,| 0,556,279,185,139, | | 0,576,289,192,144,| 0,646,323,215, | 0,513,259,172, | | | | 100,83,71,63,56, | 111,93,79,69,62, | | 115,96,82,72,64, | 162,129,108,92,| 130,104,86,74, | | | RK3566/RK3568 | 50,45,41,38,36,33,| 55,50,46,42,39,37, | follow DDR4 | 57,52,48,44,41, | 81,72,65,59,54,| 65,58,52,47,43,| X | | | 31,29,28,26,25,24,| 34,32,31,29,27,26, | | 38,36,34,32,30, | 50,46,43,40,38,| 40,37,35,32,30,| | | | 23,22 | 25,24 | | 28,27,26,25 | 36,34,32,31,29,| 29,27,26,25,24,| | | | | | | | 28 | 23 | | +---------------+-------------------+--------------------+--------------+-------------------+----------------+----------------+-------------+ | RK3588 | X | X | X | 0,240,120,80, | follow LP4 | follow LP4 | follow LP4 | | | | | | 60,48,40,34,30 | | | | +---------------+-------------------+--------------------+--------------+-------------------+----------------+----------------+-------------+ The DRAM side ODT support value as follows: +---------------+-------------------+-------------------+--------------+-----------------------+----------------+---------------+ | platform | DDR3 | DDR4 | LP3 | LP4(include DQ and CA)| LP4X | LP5 | +---------------+-------------------+-------------------+--------------+-----------------------+----------------+---------------+ | all | 0,40,60,120 | 0,34,40,48,60,120 | 0,60,120,240 | 0,40,48,60,80,120,240 | follow LP4 | follow LP4 | +---------------+-------------------+-------------------+--------------+-----------------------+----------------+---------------+ * slew rate phy_ddr*_dq_sr_when_odten: The PHY DQ/DQS slew rate when odt on. phy_ddr*_ca_sr_when_odten: The PHY CMD/ADDR slew rate when odt on. phy_ddr*_clk_sr_when_odten: The PHY clock slew rate when odt on. phy_ddr*_dq_sr_when_odtoff: The PHY DQ/DQS slew rate when odt off. phy_ddr*_ca_sr_when_odtoff: The PHY CMD/ADDR slew rate when odt off. phy_ddr*_clk_sr_when_odtoff: The PHY clock slew rate when odt off. The max value is 0x1f, the min is 0x0. * byte map ddr*_bytes_map: The bytes remap in PHY. * dq remap lp*_dq*_*_map: The dq remap in PHY. ddr*_cs*_dq*_dq*_map: The dq remap in PHY. * lp4/lp4x more information lp4*_ca_odten_freq_mhz: The DRAM CMD/ADDR odt enable when larger than this frequency. unit: MHz. phy_lp4*_dq_vref_when_odten: The PHY VrefDQ when PHY odt on. uint: parts per thousand. lp4*_dq_vref_when_odten: The DRAM VrefDQ when DRAM DQ/DQS odt on. uint: parts per thousand. lp4*_ca_vref_when_odten: The DRAM VrefCA when DRAM CA odt on. uint: parts per thousand. phy_lp4_dq_vref_when_odtoff: The PHY VrefDQ when PHY odt off. uint: parts per thousand. lp4_dq_vref_when_odtoff: The DRAM VrefDQ when DRAM DQ/DQS odt off. uint: parts per thousand. lp4_ca_vref_when_odtoff: The DRAM VrefCA when DRAM CA odt off. uint: parts per thousand. * hash info ch/bank/rank_mask*: is used to DDR address hash mask.