/** @file
 *
 *  Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
 *  Copyright (c) 2020, ARM Limited. All rights reserved.
 *
 *  SPDX-License-Identifier: BSD-2-Clause-Patent
 *
 **/

#langdef en-US  "English"

#string STR_NULL_STRING          #language en-US ""

#string STR_FORM_SET_TITLE       #language en-US "Raspberry Pi Configuration"
#string STR_FORM_SET_TITLE_HELP  #language en-US "Press <Enter> to configure system settings."

/*
 * Chipset configuration.
 */

#string STR_CHIPSET_FORM_TITLE      #language en-US "CPU Configuration"
#string STR_CHIPSET_FORM_SUBTITLE   #language en-US "Note: OS may override settings."

#string STR_CHIPSET_CLOCK_CPU_PROMPT #language en-US "CPU Clock"
#string STR_CHIPSET_CLOCK_CPU_HELP   #language en-US "CPU Speed"
#string STR_CHIPSET_CLOCK_CPU_LOW    #language en-US "Low"
#string STR_CHIPSET_CLOCK_CPU_DEF    #language en-US "Default"
#string STR_CHIPSET_CLOCK_CPU_MAX    #language en-US "Max"
#string STR_CHIPSET_CLOCK_CPU_CUSTOM #language en-US "Custom"

#string STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT #language en-US "CPU Clock Rate (MHz)"
#string STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP   #language en-US "Manually set the CPU Speed\n\nWarning: Overclocking can make the system unbootable!"

/*
 * Advanced configuration.
 */

#string STR_ADVANCED_FORM_TITLE      #language en-US "Advanced Configuration"

#string STR_ADVANCED_3GB_PROMPT      #language en-US "Limit RAM to 3 GB"
#string STR_ADVANCED_3GB_HELP        #language en-US "OSes not supporting ACPI DMA constraints require a 3 GB limit or face broken xHCI USB"
#string STR_ADVANCED_3GB_OFF         #language en-US "Disabled"
#string STR_ADVANCED_3GB_ON          #language en-US "Enabled"

#string STR_ADVANCED_SYSTAB_PROMPT   #language en-US "System Table Selection"
#string STR_ADVANCED_SYSTAB_HELP     #language en-US "ACPI/DT choice for specific OSes"
#string STR_ADVANCED_SYSTAB_ACPI     #language en-US "ACPI"
#string STR_ADVANCED_SYSTAB_BOTH     #language en-US "ACPI + Devicetree"
#string STR_ADVANCED_SYSTAB_DT       #language en-US "Devicetree"

#string STR_ADVANCED_FANONGPIO_PROMPT #language en-US "ACPI fan control"
#string STR_ADVANCED_FANONGPIO_HELP   #language en-US "Cycle a fan via GPIO at given temperature"
#string STR_ADVANCED_FANONGPIO_OFF    #language en-US "Disabled"
#string STR_ADVANCED_FANONGPIO_18     #language en-US "Fan Shim/GPIO-18"
#string STR_ADVANCED_FANONGPIO_19     #language en-US "GPIO-19"

#string STR_ADVANCED_FANTEMP_PROMPT   #language en-US "ACPI fan temperature"
#string STR_ADVANCED_FANTEMP_HELP     #language en-US "Cycle a fan at C"

#string STR_ADVANCED_XHCIPCI_PROMPT   #language en-US "ACPI XHCI/PCIe"
#string STR_ADVANCED_XHCIPCI_HELP     #language en-US "OS sees XHCI USB platform device or PCIe bridge"
#string STR_ADVANCED_XHCIPCI_XHCI     #language en-US "XHCI"
#string STR_ADVANCED_XHCIPCI_PCIE     #language en-US "PCIe"

#string STR_ADVANCED_ASSET_TAG_PROMPT #language en-US "Asset Tag"
#string STR_ADVANCED_ASSET_TAG_HELP   #language en-US "Set the system Asset Tag"

/*
 * MMC/SD configuration.
 */

#string STR_MMC_FORM_TITLE       #language en-US "SD/MMC Configuration"
#string STR_MMC_FORM_SUBTITLE    #language en-US "Note: UEFI only, OS may override settings."

#string STR_MMC_SD_PROMPT        #language en-US "uSD/eMMC Routing"
#string STR_MMC_SD_HELP          #language en-US "Choose host controller to drive local flash storage"
#string STR_MMC_SD_EMMC2         #language en-US "eMMC2 SDHCI"
#string STR_MMC_SD_SDHOST        #language en-US "Broadcom SDHOST"
#string STR_MMC_SD_ARASAN        #language en-US "Arasan SDHCI"

#string STR_MMC_DISMULTI_PROMPT  #language en-US "Multi-Block Support"
#string STR_MMC_DISMULTI_HELP    #language en-US "Use CMD18/CMD25 for transfers when possible"
#string STR_MMC_DISMULTI_N       #language en-US "Multi-block transfers"
#string STR_MMC_DISMULTI_Y       #language en-US "Single-block transfers"

#string STR_MMC_FORCE1BIT_PROMPT #language en-US "uSD Max Bus Width"
#string STR_MMC_FORCE1BIT_HELP   #language en-US "Tweak for bad media (N/A for eMMC)"
#string STR_MMC_FORCE1BIT_Y      #language en-US "1 Bit Mode"
#string STR_MMC_FORCE1BIT_N      #language en-US "4 Bit Mode"

#string STR_MMC_FORCEDS_PROMPT   #language en-US "uSD Force Default Speed"
#string STR_MMC_FORCEDS_HELP     #language en-US "Tweak for bad media (N/A for eMMC)"
#string STR_MMC_FORCEDS_Y        #language en-US "Force Default Speed"
#string STR_MMC_FORCEDS_N        #language en-US "Allow High Speed"

#string STR_MMC_SD_DS_PROMPT     #language en-US "SD Default Speed (MHz)"
#string STR_MMC_SD_DS_HELP       #language en-US "Override default 25Mhz"

#string STR_MMC_SD_HS_PROMPT     #language en-US "SD High Speed (MHz)"
#string STR_MMC_SD_HS_HELP       #language en-US "Override default 50Mhz"

#string STR_MMC_EMMC_PROMPT      #language en-US "Enable eMMC DMA modes"
#string STR_MMC_EMMC_PIO         #language en-US "PIO"
#string STR_MMC_EMMC_DMA         #language en-US "SDMA/ADMA2"
#string STR_MMC_EMMC_HELP        #language en-US "Enable eMMC DMA modes for OSes that support ACPI _DMA() translations"

/*
 * Display settings.
 */

#string STR_DISPLAY_FORM_TITLE      #language en-US "Display Configuration"
#string STR_DISPLAY_FORM_SUBTITLE   #language en-US "UEFI video driver settings"

#string STR_DISPLAY_VMODES_640_PROMPT  #language en-US "Virtual 640x480"
#string STR_DISPLAY_VMODES_640_HELP    #language en-US "Enable scaled 640x480 mode"
#string STR_DISPLAY_VMODES_800_PROMPT  #language en-US "Virtual 800x600"
#string STR_DISPLAY_VMODES_800_HELP    #language en-US "Enable scaled 800x600 mode"
#string STR_DISPLAY_VMODES_1024_PROMPT #language en-US "Virtual 1024x768"
#string STR_DISPLAY_VMODES_1024_HELP   #language en-US "Enable scaled 1024x768 mode"
#string STR_DISPLAY_VMODES_720_PROMPT  #language en-US "Virtual 720p"
#string STR_DISPLAY_VMODES_720_HELP    #language en-US "Enable scaled 720p mode"
#string STR_DISPLAY_VMODES_1080_PROMPT #language en-US "Virtual 1080p"
#string STR_DISPLAY_VMODES_1080_HELP   #language en-US "Enable scaled 1080p mode"

#string STR_DISPLAY_VMODES_REAL_PROMPT #language en-US "Native resolution"
#string STR_DISPLAY_VMODES_REAL_HELP   #language en-US "Native resolution"

#string STR_DISPLAY_SSHOT_PROMPT    #language en-US "Screenshot Support"
#string STR_DISPLAY_SSHOT_HELP      #language en-US "Save screen capture as a BMP on the first writable file system found"
#string STR_DISPLAY_SSHOT_ENABLE    #language en-US "Control-Alt-F12"
#string STR_DISPLAY_SSHOT_DISABLE   #language en-US "Not Enabled"

/*
 * Debugging settings go here.
 */
#string STR_DEBUG_FORM_TITLE        #language en-US "Debugging Configuration"
#string STR_DEBUG_FORM_SUBTITLE     #language en-US "For UEFI/OS Developers"

#string STR_DEBUG_JTAG_PROMPT       #language en-US "JTAG Routing"
#string STR_DEBUG_JTAG_HELP         #language en-US "Signals (nTRST, TDI, TMS, TCK, RTCK, TDO) -> Header pins (15, 7, 13, 22, 16, 18)"
#string STR_DEBUG_JTAG_ENABLE       #language en-US "Enable JTAG via GPIO"
#string STR_DEBUG_JTAG_DISABLE      #language en-US "Disable JTAG"