From d4a1bd480003f3e1a0590bc46fbcb24f05652ca7 Mon Sep 17 00:00:00 2001
From: tzh <tanzhtanzh@gmail.com>
Date: Thu, 15 Aug 2024 06:56:47 +0000
Subject: [PATCH] feat(wfit/bt): update aic8800 wifi/bt drive and hal
---
longan/kernel/linux-4.9/drivers/net/wireless/aic8800/aic8800_fdrv/ipc_host.h | 336 --------------------------------------------------------
1 files changed, 0 insertions(+), 336 deletions(-)
diff --git a/longan/kernel/linux-4.9/drivers/net/wireless/aic8800/aic8800_fdrv/ipc_host.h b/longan/kernel/linux-4.9/drivers/net/wireless/aic8800/aic8800_fdrv/ipc_host.h
old mode 100644
new mode 100755
index c153862..583b668
--- a/longan/kernel/linux-4.9/drivers/net/wireless/aic8800/aic8800_fdrv/ipc_host.h
+++ b/longan/kernel/linux-4.9/drivers/net/wireless/aic8800/aic8800_fdrv/ipc_host.h
@@ -23,24 +23,6 @@
#include "ipc_compat.h"
#endif
-/*
- * ENUMERATION
- ******************************************************************************
- */
-
-enum ipc_host_desc_status {
- /// Descriptor is IDLE
- IPC_HOST_DESC_IDLE = 0,
- /// Data can be forwarded
- IPC_HOST_DESC_FORWARD,
- /// Data has to be kept in UMAC memory
- IPC_HOST_DESC_KEEP,
- /// Delete stored packet
- IPC_HOST_DESC_DELETE,
- /// Update Frame Length status
- IPC_HOST_DESC_LEN_UPDATE,
-};
-
/**
******************************************************************************
* @brief This structure is used to initialize the MAC SW
@@ -182,323 +164,5 @@
extern const int nx_txdesc_cnt[];
extern const int nx_txuser_cnt[];
-
-/**
- ******************************************************************************
- * @brief Returns the full/not full status of the queue the index of which is
- * passed as parameter.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] queue_idx Index of the queue to be checked
- *
- * @return true if the queue is full, false otherwise
- *
- ******************************************************************************
- */
-static __INLINE bool ipc_host_queue_full(struct ipc_host_env_tag *env,
- const int queue_idx)
-{
- return (env->txdesc_free_idx[queue_idx] ==
- (env->txdesc_used_idx[queue_idx] + nx_txdesc_cnt[queue_idx]));
-}
-
-/**
- ******************************************************************************
- * @brief Initialize the IPC running on the Application CPU.
- *
- * This function:
- * - initializes the IPC software environments
- * - enables the interrupts in the IPC block
- *
- * @param[in] env Pointer to the IPC host environment
- *
- * @warning Since this function resets the IPC Shared memory, it must be called
- * before the LMAC FW is launched because LMAC sets some init values in IPC
- * Shared memory at boot.
- *
- ******************************************************************************
- */
-void ipc_host_init(struct ipc_host_env_tag *env,
- struct ipc_host_cb_tag *cb,
- struct ipc_shared_env_tag *shared_env_ptr,
- void *pthis);
-
-/** @addtogroup IPC_TX
- * @{
- */
-
-/**
- ******************************************************************************
- * @brief Retrieve a new free Tx descriptor (host side).
- *
- * This function returns a pointer to the next Tx descriptor available from the
- * queue queue_idx to the host driver. The driver will have to fill it with the
- * appropriate endianness and to send it to the
- * emb side with ipc_host_txdesc_push().
- *
- * This function should only be called once until ipc_host_txdesc_push() is called.
- *
- * This function will return NULL if the queue is full.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] queue_idx Queue index. The index can be inferred from the
- * user priority of the incoming packet.
- * @param[in] user_pos User position. If MU-MIMO is not used, this value
- * shall be 0.
- * @return Pointer to the next Tx descriptor free. This can
- * point to the host memory or to shared memory,
- * depending on IPC implementation.
- *
- ******************************************************************************
- */
-volatile struct txdesc_host *ipc_host_txdesc_get(struct ipc_host_env_tag *env,
- const int queue_idx,
- const int user_pos);
-
-
-/**
- ******************************************************************************
- * @brief Push a filled Tx descriptor (host side).
- *
- * This function sets the next Tx descriptor available by the host side:
- * - as used for the host side
- * - as available for the emb side.
- * The Tx descriptor must be correctly filled before calling this function.
- *
- * This function may trigger an IRQ to the emb CPU depending on the interrupt
- * mitigation policy and on the push count.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] queue_idx Queue index. Same value than ipc_host_txdesc_get()
- * @param[in] user_pos User position. If MU-MIMO is not used, this value
- * shall be 0.
- * @param[in] host_id Parameter indicated by the IPC at TX confirmation,
- * that allows the driver finding the buffer
- *
- ******************************************************************************
- */
-void ipc_host_txdesc_push(struct ipc_host_env_tag *env, const int queue_idx,
- const int user_pos, void *host_id);
-
-
-/**
- ******************************************************************************
- * @brief Check if there are TX frames pending in the TX queues.
- *
- * @param[in] env Pointer to the IPC host environment
- *
- * @return true if there are frames pending, false otherwise.
- *
- ******************************************************************************
- */
-bool ipc_host_tx_frames_pending(struct ipc_host_env_tag *env);
-
-/**
- ******************************************************************************
- * @brief Get and flush a packet from the IPC queue passed as parameter.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] queue_idx Index of the queue to flush
- * @param[in] user_pos User position to flush
- *
- * @return The flushed hostid if there is one, 0 otherwise.
- *
- ******************************************************************************
- */
-void *ipc_host_tx_flush(struct ipc_host_env_tag *env, const int queue_idx,
- const int user_pos);
-
-/// @} IPC_TX
-
-/** @addtogroup IPC_RX
- * @{
- */
-void ipc_host_patt_addr_push(struct ipc_host_env_tag *env, uint32_t addr);
-
-/**
- ******************************************************************************
- * @brief Push a pre-allocated buffer descriptor for Rx packet (host side)
- *
- * This function should be called by the host IRQ handler to supply the
- * embedded side with new empty buffer.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] hostid Packet ID used by the host (skbuff pointer on Linux)
- * @param[in] hostbuf Pointer to the start of the buffer payload in the
- * host memory (this may be inferred from the skbuff?)
- * The length of this buffer should be predefined
- * between host and emb statically (constant needed?).
- *
- ******************************************************************************
- */
-int ipc_host_rxbuf_push(struct ipc_host_env_tag *env,
-#ifdef CONFIG_RWNX_FULLMAC
- uint32_t hostid,
-#endif
- uint32_t hostbuf);
-
-/**
- ******************************************************************************
- * @brief Push a pre-allocated Descriptor
- *
- * This function should be called by the host IRQ handler to supply the
- * embedded side with new empty buffer.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] hostid Address of packet for host
- * @param[in] hostbuf Pointer to the start of the buffer payload in the
- * host memory. The length of this buffer should be
- * predefined between host and emb statically.
- *
- ******************************************************************************
- */
-int ipc_host_rxdesc_push(struct ipc_host_env_tag *env, void *hostid,
- uint32_t hostbuf);
-
-/**
- ******************************************************************************
- * @brief Push a pre-allocated radar event buffer descriptor
- *
- * This function is called at Init time to initialize all radar event buffers.
- * Then each time embedded send a radar event, this function is used to push
- * back the same buffer once it has been handled.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] hostid Address of packet for host
- * @param[in] hostbuf Pointer to the start of the buffer payload in the
- * host memory. The length of this buffer should be
- * predefined between host and emb statically.
- *
- ******************************************************************************
- */
-int ipc_host_radarbuf_push(struct ipc_host_env_tag *env, void *hostid,
- uint32_t hostbuf);
-
-/**
- ******************************************************************************
- * @brief Push a pre-allocated unsupported rx vector buffer descriptor
- *
- * This function is called at Init time to initialize all unsupported rx vector
- * buffers. Then each time the embedded sends a unsupported rx vector, this
- * function is used to push a new unsupported rx vector buffer.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] hostid Address of packet for host
- * @param[in] hostbuf Pointer to the start of the buffer payload in the
- * host memory. The length of this buffer should be
- * predefined between host and emb statically.
- *
- ******************************************************************************
- */
-int ipc_host_unsup_rx_vec_buf_push(struct ipc_host_env_tag *env, void *hostid,
- uint32_t hostbuf);
-
-/**
- ******************************************************************************
- * @brief Push a pre-allocated buffer descriptor for IPC MSGs (host side)
- *
- * This function is called at Init time to initialize all Emb2App messages
- * buffers. Then each time embedded send a IPC message, this function is used
- * to push back the same buffer once it has been handled.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] hostid Address of buffer for host
- * @param[in] hostbuf Address of buffer for embedded
- * The length of this buffer should be predefined
- * between host and emb statically.
- *
- ******************************************************************************
- */
-int ipc_host_msgbuf_push(struct ipc_host_env_tag *env, void *hostid,
- uint32_t hostbuf);
-
-/**
- ******************************************************************************
- * @brief Push a pre-allocated buffer descriptor for Debug messages (host side)
- *
- * This function is called at Init time to initialize all debug messages.
- * Then each time embedded send a debug message, this function is used to push
- * back the same buffer once it has been handled.
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] hostid Address of buffer for host
- * @param[in] hostbuf Address of buffer for embedded
- * The length of this buffer should be predefined
- * between host and emb statically.
- *
- ******************************************************************************
- */
-int ipc_host_dbgbuf_push(struct ipc_host_env_tag *env, void *hostid,
- uint32_t hostbuf);
-
-/**
- ******************************************************************************
- * @brief Push the pre-allocated logic analyzer and debug information buffer
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] infobuf Address of buffer for embedded
- * The length of this buffer should be predefined
- * between host and emb statically.
- *
- ******************************************************************************
- */
-void ipc_host_dbginfobuf_push(struct ipc_host_env_tag *env, uint32_t infobuf);
-
-/// @} IPC_RX
-
-
-
-/** @addtogroup IPC_MISC
- * @{
- */
-
-/**
- ******************************************************************************
- * @brief Handle all IPC interrupts on the host side.
- *
- * The following interrupts should be handled:
- * Tx confirmation, Rx buffer requests, Rx packet ready and kernel messages
- *
- * @param[in] env Pointer to the IPC host environment
- *
- ******************************************************************************
- */
-void ipc_host_irq(struct ipc_host_env_tag *env, uint32_t status);
-
-/**
- ******************************************************************************
- * @brief Send a message to the embedded side
- *
- * @param[in] env Pointer to the IPC host environment
- * @param[in] msg_buf Pointer to the message buffer
- * @param[in] msg_len Length of the message to be transmitted
- *
- * @return Non-null value on failure
- *
- ******************************************************************************
- */
-int ipc_host_msg_push(struct ipc_host_env_tag *env, void *msg_buf, uint16_t len);
-
-/**
- ******************************************************************************
- * @brief Enable IPC interrupts
- *
- * @param[in] env Global ipc_host environment pointer
- * @param[in] value Bitfield of the interrupts to enable
- *
- * @warning After calling this function, IPC interrupts can be triggered at any
- * time. Potentially, an interrupt could happen even before returning from the
- * function if there is a request pending from the embedded side.
- *
- ******************************************************************************
- */
-void ipc_host_enable_irq(struct ipc_host_env_tag *env, uint32_t value);
-void ipc_host_disable_irq(struct ipc_host_env_tag *env, uint32_t value);
-
-uint32_t ipc_host_get_status(struct ipc_host_env_tag *env);
-uint32_t ipc_host_get_rawstatus(struct ipc_host_env_tag *env);
-
-/// @} IPC_MISC
-
#endif // _IPC_HOST_H_
--
Gitblit v1.6.2