From a57e9b48676d47d3f6874b492fe8fb8ec26dfdbb Mon Sep 17 00:00:00 2001
From: tzh <tanzhtanzh@gmail.com>
Date: Wed, 14 Aug 2024 03:00:12 +0000
Subject: [PATCH] feat(other): add lcd.dtsi and other gpio
---
longan/device/config/chips/a133/configs/c3/board.dts | 460 ++++++++++++++------------------------------------------
1 files changed, 118 insertions(+), 342 deletions(-)
diff --git a/longan/device/config/chips/a133/configs/c3/board.dts b/longan/device/config/chips/a133/configs/c3/board.dts
index 3c4fd69..55a6d3f 100755
--- a/longan/device/config/chips/a133/configs/c3/board.dts
+++ b/longan/device/config/chips/a133/configs/c3/board.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "sun50iw10p1.dtsi"
+
/{
model = "sun50iw10";
compatible = "allwinner,a133", "arm,sun50iw10p1";
@@ -18,7 +19,7 @@
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
- //gpio = <&r_pio PL 11 1 2 0 1>;
+ gpio = <&r_pio PL 8 1 2 0 1>;
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -26,7 +27,7 @@
enable-active-high;
};
- soc@03000000 {
+ soc: soc@03000000 {
r_pio: pinctrl@07022000 {
@@ -100,7 +101,7 @@
};
twi3_pins_a: twi3@0 {
- allwinner,pins = "PE3", "PE4";
+ allwinner,pins = "PH12", "PH13";
allwinner,pname = "twi3_scl", "twi3_sda";
allwinner,function = "twi3";
allwinner,muxsel = <2>;
@@ -109,13 +110,13 @@
};
twi3_pins_b: twi3@1 {
- allwinner,pins = "PE3", "PE4";
+ allwinner,pins = "PH12", "PH13";
allwinner,function = "io_disabled";
allwinner,muxsel = <7>;
allwinner,drive = <1>;
allwinner,pull = <0>;
};
-
+/*
pwm0_pin_a: pwm0@0 {
//allwinner,pins = "PD23";
allwinner,function = "pwm0";
@@ -151,7 +152,7 @@
allwinner,pull = <0>;
allwinner,data = <0xffffffff>;
};
-
+*/
pwm2_pin_a: pwm2@0 {
allwinner,pins = "PD20";
allwinner,function = "pwm2";
@@ -169,7 +170,7 @@
allwinner,pull = <0>;
allwinner,data = <0xffffffff>;
};
-
+/*
pwm3_pin_a: pwm3@0 {
allwinner,pins = "PD21";
allwinner,function = "pwm3";
@@ -187,7 +188,7 @@
allwinner,pull = <0>;
allwinner,data = <0xffffffff>;
};
-
+*/
spi0_pins_a: spi0@0 {
allwinner,pins = "PC2", "PC4", "PC12", "PC15", "PC16";
allwinner,pname = "spi0_mosi", "spi0_miso",
@@ -214,6 +215,7 @@
allwinner,drive = <1>;
allwinner,pull = <0>;
};
+/*
spi1_pins_a: spi1@0 {
allwinner,pins = "PD11", "PD12", "PD13";
allwinner,pname = "spi1_sclk", "spi1_mosi",
@@ -230,7 +232,7 @@
allwinner,function = "spi1";
allwinner,muxsel = <4>;
allwinner,drive = <1>;
- allwinner,pull = <1>; /* only CS should be pulled up */
+ allwinner,pull = <1>; // only CS should be pulled up
};
spi1_pins_c: spi1@2 {
@@ -275,6 +277,7 @@
allwinner,drive = <1>;
allwinner,pull = <0>;
};
+*/
};
twi0: twi@0x05002000{
@@ -295,8 +298,8 @@
ctp_revert_x_flag = <0x1>;
ctp_revert_y_flag = <0x1>;
ctp_exchange_x_y_flag = <0x0>;
- ctp_int_port = <&r_pio PL 7 3 0xffffffff 0xffffffff 0>;
- ctp_wakeup = <&pio PB 2 1 0xffffffff 0xffffffff 1>;
+ ctp_int_port = <&pio PE 3 3 0xffffffff 0xffffffff 0>;
+ ctp_wakeup = <&pio PE 4 1 0xffffffff 0xffffffff 1>;
ctp_power_ldo = <3300>;
ctp_power_ldo_vol = <3300>;
ctp_power = <3300>;
@@ -327,14 +330,14 @@
//irq_gpio = <&pio PH 11 6 0xffffffff 0xffffffff 0>;
};
};
-
+/*
pwm3: pwm3@0300a000 {
pinctrl-names = "active", "sleep";
pinctrl-0 = <&pwm3_pin_a>;
pinctrl-1 = <&pwm3_pin_b>;
- status = "okay";
+ status = "disabled";
};
-
+*/
pwm2: pwm2@0300a000 {
pinctrl-names = "active", "sleep";
pinctrl-0 = <&pwm2_pin_a>;
@@ -347,46 +350,7 @@
pinctrl-0 = <&twi1_pins_a>;
pinctrl-1 = <&twi1_pins_b>;
status = "okay";
- gsensor {
- compatible = "allwinner,sc7a20";
- reg = <0x19>;
- device_type = "gsensor";
- status = "disabled";
- gsensor_twi_id = <0x1>;
- gsensor_twi_addr = <0x19>;
- //gsensor_int1 = <&pio PH 11 6 1 0xffffffff 0xffffffff>;
- gsensor-supply = <®_dcdc1>;
- gsensor_vcc_io_val = <3300>;
- };
- lightsensor {
- compatible = "allwinner,stk3x1x";
- reg = <0x48>;
- device_type = "lightsensor";
- status = "disabled";
- ls_twi_id = <0x1>;
- ls_twi_addr = <0x48>;
- //ls_int = <&pio PH 4 6 1 0xffffffff 0xffffffff>;
- lightsensor-supply = <®_dcdc1>;
- };
- pcf85063@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- status = "okay";
- };
- mpu6050@68 {
- compatible = "invensense,mpu6500";
- reg = <0x68>;
- mount-matrix = "-0.984807753012208", /* x0 */
- "0", /* y0 */
- "-0.173648177666930", /* z0 */
- "0", /* x1 */
- "-1", /* y1 */
- "0", /* z1 */
- "-0.173648177666930", /* x2 */
- "0", /* y2 */
- "0.984807753012208"; /* z2 */
- status = "disabled";
- };
+ // EXTEND GPIO
};
twi2: twi@0x05002800{
@@ -394,21 +358,23 @@
pinctrl-0 = <&twi2_pins_a>;
pinctrl-1 = <&twi2_pins_b>;
twi-supply = <®_dldo2>;
- status = "ok";
+ status = "okay";
+ // CAMERA1
-/* ac107@36 {
- compatible = "Allwinnertech,ac107_0";
- gpio-reset = "null";
- reg = <0x36>;
- status = "okay";
- }; */
+ // CAMERA2
};
twi3: twi@0x05002c00{
clock-frequency = <200000>;
pinctrl-0 = <&twi3_pins_a>;
pinctrl-1 = <&twi3_pins_b>;
- status = "ok";
+ status = "okay";
+ // RTC
+ pcf8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ status = "okay";
+ };
};
twi6: s_twi@0x07081400{
@@ -642,15 +608,20 @@
};
reg_dldo1: dldo1 {
regulator-name = "axp803-dldo1";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
};
reg_dldo2: dldo2 {
regulator-name = "axp803-dldo2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <4200000>;
regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ // kickpi
};
reg_dldo3: dldo3 {
regulator-name = "axp803-dldo3";
@@ -681,6 +652,9 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1900000>;
regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ // kickpi
};
reg_fldo1: fldo1 {
regulator-name = "axp803-fldo1";
@@ -832,7 +806,7 @@
osc24m-on = <0x1>;
};
-
+/*
pwm0: pwm0@0300a000 {
pinctrl-names = "active", "sleep";
pinctrl-0 = <&pwm0_pin_a>;
@@ -852,7 +826,7 @@
spi_slave_mode = <0>;
status = "disabled";
};
-
+*/
gpadc:gpadc{
channel_num = <1>;
channel_select = <0x01>;
@@ -923,8 +897,7 @@
device_type = "usbc0";
usb_port_type = <0x0>;
usb_detect_type = <0x1>;
- //usb_id_gpio = <&pio PH 8 0 0 0xffffffff 0xffffffff>;
- usb_id_gpio = <&r_pio PL 10 0 0 0xffffffff 0xffffffff>;
+ usb_id_gpio = <&r_pio PL 9 0 0 0xffffffff 0xffffffff>;
usb_det_vbus_gpio = "axp_ctrl";
usb_regulator_io = "nocare";
det_vbus_supply = <&usb_power_supply>;
@@ -963,23 +936,26 @@
};
sdc1: sdmmc@04021000 {
- bus-width = <4>;
- no-mmc;
- no-sd;
- cap-sd-highspeed;
- /*sd-uhs-sdr12*/
- /*sd-uhs-sdr25*/
- /*sd-uhs-sdr50;*/
- /*sd-uhs-ddr50;*/
- /*sd-uhs-sdr104*/
- /*sunxi-power-save-mode;*/
- /*sunxi-dis-signal-vol-sw;*/
- cap-sdio-irq;
- keep-power-in-suspend;
- ignore-pm-notify;
- max-frequency = <50000000>;
- ctl-spec-caps = <0x8>;
- status = "okay";
+ bus-width = <4>;
+ no-mmc;
+ no-sd;
+ cap-sd-highspeed;
+ /*sd-uhs-sdr12*/
+ /*sd-uhs-sdr25*/
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ // kickpi
+ //sunxi-power-save-mode;
+ /*sunxi-dis-signal-vol-sw;*/
+ sdio-used-1v8;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ ignore-pm-notify;
+ max-frequency = <50000000>;
+ ctl-spec-caps = <0x8>;
+ status = "okay";
+
};
/* gpio-spk will output 0x00 when playing audio */
@@ -1001,7 +977,7 @@
/* Pa enabled about */
pa_level = <0x00>;
pa_msleep_time = <0x78>;
- gpio-spk = <&pio PH 17 1 1 1 1>;
+ //gpio-spk = <&pio PB 7 1 1 1 1>;
/* regulator about */
avcc-supply = <®_aldo1>;
cpvin-supply = <®_eldo1>;
@@ -1041,7 +1017,7 @@
daudio_master = <0x04>;
signal_inversion = <0x01>;
slot_width_select = <0x20>;
- status = "disabled";
+ status = "okay";
};
snddaudio0:sound@3 {
@@ -1050,7 +1026,7 @@
/* sunxi,snddaudio-codec = "ac107.1-0036";
sunxi,snddaudio-codec-dai = "ac107-pcm0"; */
- status = "disabled";
+ status = "okay";
};
daudio1:daudio@0x05091000 {
@@ -1116,7 +1092,7 @@
vind0:vind@0 {
vind0_clk = <336000000>;
vind0_isp = <300000000>;
- status = "okay";
+ status = "disabled";
actuator0:actuator@0 {
device_type = "actuator0";
@@ -1231,203 +1207,14 @@
status = "okay";
};
};
-/*----------------------------------------------------------------------------------
-disp init configuration
-disp_mode (0:screen0<screen0,fb0>)
-screenx_output_type (0:none; 1:lcd; 2:tv; 3:hdmi;5:vdpo)
-screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
- (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
-screenx_output_format (for hdmi, 0:RGB 1:yuv444 2:yuv422 3:yuv420)
-screenx_output_bits (for hdmi, 0:8bit 1:10bit 2:12bit 2:16bit)
-screenx_output_eotf (for hdmi, 0:reserve 4:SDR 16:HDR10 18:HLG)
-screenx_output_cs (for hdmi, 0:undefined 257:BT709 260:BT601 263:BT2020)
-screenx_output_dvi_hdmi (for hdmi, 0:undefined 1:dvi mode 2:hdmi mode)
-screen0_output_range (for hdmi, 0:default 1:full 2:limited)
-screen0_output_scan (for hdmi, 0:no data 1:overscan 2:underscan)
-screen0_output_aspect_ratio (for hdmi, 8-same as original picture 9-4:3 10-16:9 11-14:9)
-fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
-fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
-fb0_scaler_mode_enable(scaler mode enable, used FE)
-fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
-lcdx_backlight (lcd init backlight,the range:[0,256],default:197
-lcdx_yy (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
-lcd0_contrast (LCD contrast, 0~100)
-lcd0_saturation (LCD saturation, 0~100)
-lcd0_hue (LCD hue, 0~100)
-framebuffer software rotation setting:
-disp_rotation_used: (0:disable; 1:enable,you must set fbX_width to lcd_y,
-set fbX_height to lcd_x)
-degreeX: (X:screen index; 0:0 degree; 1:90 degree; 3:270 degree)
-degreeX_Y: (X:screen index; Y:layer index 0~15; 0:0 degree; 1:90 degree; 3:270 degree)
-devX_output_type : config output type in bootGUI framework in UBOOT-2018.
- (0:none; 1:lcd; 2:tv; 4:hdmi;)
-devX_output_mode : config output resolution(see include/video/sunxi_display2.h) of bootGUI framework in UBOOT-2018
-devX_screen_id : config display index of bootGUI framework in UBOOT-2018
-devX_do_hpd : whether do hpd detectation or not in UBOOT-2018
-chn_cfg_mode : Hardware DE channel allocation config. 0:single display with 6
- channel, 1:dual display with 4 channel in main display and 2 channel in second
- display, 2:dual display with 3 channel in main display and 3 channel in second
- in display.
-----------------------------------------------------------------------------------*/
- disp: disp@06000000 {
- disp_init_enable = <1>;
- disp_mode = <0>;
-
- screen0_output_type = <1>;
- screen0_output_mode = <4>;
-
- screen1_output_type = <1>;
- screen1_output_mode = <4>;
-
- screen1_output_format = <0>;
- screen1_output_bits = <0>;
- screen1_output_eotf = <4>;
- screen1_output_cs = <257>;
- screen1_output_dvi_hdmi = <2>;
- screen1_output_range = <2>;
- screen1_output_scan = <0>;
- screen1_output_aspect_ratio = <8>;
-
- dev0_output_type = <1>;
- dev0_output_mode = <4>;
- dev0_screen_id = <0>;
- dev0_do_hpd = <0>;
-
- dev1_output_type = <4>;
- dev1_output_mode = <10>;
- dev1_screen_id = <1>;
- dev1_do_hpd = <1>;
-
- def_output_dev = <0>;
- hdmi_mode_check = <1>;
-
- fb0_format = <0>;
- fb0_width = <1024>;
- fb0_height = <600>;
-
- fb1_format = <0>;
- fb1_width = <0>;
- fb1_height = <0>;
- chn_cfg_mode = <1>;
-
- disp_para_zone = <1>;
- dc1sw-supply = <®_dc1sw>;
- eldo3-supply = <®_eldo3>;
- dcdc1-supply = <®_dcdc1>;
- };
-/*----------------------------------------------------------------------------------
-;lcd0 configuration
-
-;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi
-;lcd_hv_if 0:Parallel RGB; 8:Serial RGB; 10:Dummy RGB; 11: RGB Dummy;12:CCIR656
-;lcd_hv_clk_phase 0:0 degree;1:90 degree;2:180 degree;3:270 degree
-;lcd_hv_sync_polarity 0:vs low,hs low; 1:vs high,hslow; 2:vs low,hs high; 3:vs high,hs high
-;lcd_hv_syuv_seq 0:YUYV; 1:YVYU; 2:UYVY; 3:VYUY
-;lcd_cpu_if 0:18bit/1 cycle parallel(RGB666); 4:16bit/1cycle parallel (RGB565)
-; 6:18bit/3 cycle parallel(RGB666); 7:16bit/2cycle parallel (RGB565)
-;lcd_cpu_te 0:frame auto trigger; 1:frame triggered by te rising edge; 2:frame triggered by te falling edge;
-;lcd_dsi_if 0:video mode; 1: Command mode; 2:video burst mode
-;lcd_dsi_te 0:frame auto trigger; 1:frame triggered by te rising edge; 2:frame triggered by te falling edge;
-;lcd_x: lcd horizontal resolution
-;lcd_y: lcd vertical resolution
-;lcd_width: width of lcd in mm
-;lcd_height: height of lcd in mm
-;lcd_dclk_freq: in MHZ unit
-;lcd_pwm_freq: in HZ unit
-;lcd_pwm_pol: lcd backlight PWM polarity
-;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
-;lcd_hbp: hsync back porch(pixel) + hsync plus width(pixel);
-;lcd_ht: hsync total cycle(pixel)
-;lcd_vbp: vsync back porch(line) + vysnc plus width(line)
-;lcd_vt: vysnc total cycle(line)
-;lcd_hspw: hsync plus width(pixel)
-;lcd_vspw: vysnc plus width(pixel)
-;lcd_lvds_if: 0:single link; 1:dual link
-;lcd_lvds_colordepth: 0:8bit; 1:6bit
-;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
-;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
-;lcd_io_phase: 0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase;
-; 8~11bit:dclk phase; 12~15bit:de phase)
-;lcd_gamma_en lcd gamma correction enable
-;lcd_bright_curve_en lcd bright curve correction enable
-;lcd_cmap_en lcd color map function enable
-;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
-;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10;
-; decrease it while lcd is not bright enough; increase while lcd is too bright
-;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch)
-;Pin setting for special function ie.LVDS, RGB data or vsync
-; name(donot care) = port:PD12<pin function><pull up or pull down><drive ability><output level>
-;Pin setting for gpio:
-; lcd_gpio_X = port:PD12<pin function><pull up or pull down><drive ability><output level>
-;Pin setting for backlight enable pin
-; lcd_bl_en = port:PD12<pin function><pull up or pull down><drive ability><output level>
-;fsync setting, pulse to csi
-;lcd_fsync_en (0:disable fsync,1:enable)
-;lcd_fsync_act_time (active time of fsync, unit:pixel)
-;lcd_fsync_dis_time (disactive time of fsync, unit:pixel)
-;lcd_fsync_pol (0:positive;1:negative)
-;gpio config: <&pio for cpu or &r_pio for cpus, port, port num, pio function,
-pull up or pull down(default 0), driver level(default 1), data>
-;For dual link lvds: use lvds2link_pins_a and lvds2link_pins_b instead
-;For rgb24: use rgb24_pins_a and rgb24_pins_b instead
-;For lvds1: use lvds1_pins_a and lvds1_pins_b instead
-;For lvds0: use lvds0_pins_a and lvds0_pins_b instead
-;----------------------------------------------------------------------------------*/
- lcd0: lcd0@01c0c000 {
- lcd_used = <1>;
-
- lcd_driver_name = "default_lcd";
- lcd_backlight = <100>;
- lcd_if = <3>;
-
- lcd_x = <1024>;
- lcd_y = <600>;
- lcd_width = <217>;
- lcd_height = <136>;
- lcd_dclk_freq = <49>;
-
- lcd_pwm_used = <1>;
- lcd_pwm_ch = <3>;
- lcd_pwm_freq = <50000>;
- lcd_pwm_pol = <1>;
- lcd_pwm_max_limit = <255>;
-
- lcd_hbp = <124>;
- lcd_ht = <1264>;
- lcd_hspw = <24>;
- lcd_vbp = <24>;
- lcd_vt = <648>;
- lcd_vspw = <4>;
-
- lcd_frm = <0>;
- lcd_gamma_en = <0>;
- lcd_bright_curve_en = <0>;
- lcd_cmap_en = <0>;
-
- deu_mode = <0>;
- lcdgamma4iep = <22>;
- smart_color = <90>;
-
- lcd_lvds_if = <0>;
- lcd_lvds_colordepth = <0>;
- lcd_lvds_mode = <0>;
-
- lcd_pin_power = "dcdc1";
- lcd_pin_power1 = "eldo3";
-
- lcd_power = "dc1sw";
- lcd_gpio_0 = <&r_pio PL 11 1 0 3 1>;
- pinctrl-0 = <&lvds0_pins_a>;
- pinctrl-1 = <&lvds0_pins_b>;
- };
-
+/*
hall_para {
hall_name = "MH248";
status = "disabled";
hall_int_port = <&r_pio PL 9 6 1 0xffffffff 0xffffffff>;
};
-
+*/
keyboard {
compatible = "allwinner,keyboard_1350mv";
status = "disable";
@@ -1437,6 +1224,39 @@
key2 = <900 0x72>;
};
+ wlan: wlan@0 {
+ compatible = "allwinner,sunxi-wlan";
+ clocks;
+ pinctrl-0;
+ pinctrl-names;
+ wlan_busnum = <0x1>;
+ wlan_power = "axp803-dldo1";
+ wlan_io_regulator;
+ wlan_regon = <&pio PG 10 1 0xffffffff 0xffffffff 1>;
+ wlan_hostwake = <&pio PG 13 6 0xffffffff 0xffffffff 0>;
+ //chip_en;
+ //power_en = <&pio PG 10 1 0xffffffff 0xffffffff 0>;
+ status = "okay";
+ };
+
+ bt: bt@0 {
+ compatible = "allwinner,sunxi-bt";
+ clocks = <&clk_losc_out>, <&clk_dcxo_out>;
+ bt_power = "axp803-dldo1";
+ bt_io_regulator;
+ bt_rst_n = <&r_pio PL 3 1 0xffffffff 0xffffffff 0>;
+ status = "okay";
+ };
+
+ btlpm: btlpm@0 {
+ compatible = "allwinner,sunxi-btlpm";
+ uart_index = <0x1>;
+ bt_wake = <&pio PG 12 1 0xffffffff 0xffffffff 1>;
+ bt_hostwake = <&pio PG 11 6 0xffffffff 0xffffffff 1>;
+ status = "okay";
+ };
+
+/*
wlan: wlan@0 {
compatible = "allwinner,sunxi-wlan";
clocks = <&clk_losc_out>, <&clk_dcxo_out>;
@@ -1445,30 +1265,31 @@
wlan_busnum = <0x1>;
wlan_power = "axp803-dldo1";
wlan_io_regulator;
- wlan_regon = <&r_pio PL 5 1 0xffffffff 0xffffffff 0>;
- wlan_hostwake = <&r_pio PL 6 6 0xffffffff 0xffffffff 0>;
+ wlan_regon = <&pio PG 10 1 0xffffffff 0xffffffff 0>;
+ wlan_hostwake = <&pio PG 13 6 0xffffffff 0xffffffff 0>;
chip_en;
power_en;
status = "okay";
};
+
bt: bt@0 {
compatible = "allwinner,sunxi-bt";
clocks = <&clk_losc_out>, <&clk_dcxo_out>;
bt_power = "axp803-dldo1";
//bt_power = "axp803-dldo1";
bt_io_regulator;
- bt_rst_n = <&r_pio PL 2 1 0xffffffff 0xffffffff 0>;
+ //bt_rst_n = <&r_pio PL 2 1 0xffffffff 0xffffffff 0>;
status = "okay";
};
btlpm: btlpm@0 {
compatible = "allwinner,sunxi-btlpm";
uart_index = <0x1>;
- bt_wake = <&r_pio PL 4 1 0xffffffff 0xffffffff 1>;
- bt_hostwake = <&r_pio PL 3 6 0xffffffff 0xffffffff 1>;
+ bt_wake = <&pio PG 11 1 0xffffffff 0xffffffff 1>;
+ bt_hostwake = <&pio PG 12 6 0xffffffff 0xffffffff 1>;
status = "okay";
};
-
+*/
addr_mgt: addr_mgt@0 {
compatible = "allwinner,sunxi-addr_mgt";
type_addr_wifi = <0x0>;
@@ -1516,69 +1337,24 @@
pinctrl-names = "default";
status = "okay";
- sys {
+ sysled {
label = "sysled";
- gpios = <&pio PH 19 1 0 1 0>;
+ gpios = <&r_pio PL 11 1 0 1 1>;
linux,default_trigger = "heartbeat";
};
-
- hubrst {
- label = "hubrst";
- gpios = <&pio PC 7 1 0 1 1>;
- default_state="on";
- };
-
- usb1_pwr {
- label = "usb1_pwr";
- gpios = <&r_pio PL 9 1 0 1 1>;
- default_state="on";
- };
- usb2_pwr {
- label = "usb2_pwr";
- gpios = <&pio PH 15 1 0 1 1>;
- default_state="on";
- };
-
- usb3_pwr {
- label = "usb3_pwr";
- gpios = <&pio PH 16 1 0 1 1>;
- default_state="on";
- };
-
- usb4_pwr {
- label = "usb4_pwr";
- gpios = <&r_pio PL 8 1 0 1 1>;
- default_state="on";
- };
-
- usb5_pwr {
- label = "usb5_pwr";
- gpios = <&pio PH 18 1 0 1 1>;
- default_state="on";
- };
-
- usb6_pwr {
- label = "usb6_pwr";
- gpios = <&pio PB 6 1 0 1 1>;
- default_state="on";
- };
-
- usb7_pwr {
- label = "usb7_pwr";
- gpios = <&pio PB 8 1 0 1 1>;
- default_state="on";
- };
-
- spkmute {
- label = "spkmute";
- gpios = <&pio PH 13 1 0 1 0>;
- default_state="on";
- };
+ spk_en {
+ label = "spk_en";
+ gpios = <&pio PB 7 1 0 1 0>;
+ linux,default_trigger = "default-on";
+ };
};
-
};
&cpu0 {
cpu-supply = <®_dcdc2>;
};
+
+//#include "lcd-lvds-21-1920-1080.dtsi"
+#include "lcd-lvds-7-1024-600.dtsi"
+//#include "lcd-mipi-10-800-1280.dtsi"
--
Gitblit v1.6.2