From 755336cb89d9507a85518c0bbb55ed1db039c2fa Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 13 Aug 2024 08:02:37 +0000
Subject: [PATCH] 4g /5g

---
 kernel/arch/arm64/boot/dts/rockchip/NK-6A13_V0A.dtsi |  232 +++++++++++++++++++++++++++++-----------------------------
 1 files changed, 116 insertions(+), 116 deletions(-)

diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-6A13_V0A.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-6A13_V0A.dtsi
index 3b44759..9cad9bf 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-6A13_V0A.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-6A13_V0A.dtsi
@@ -38,10 +38,10 @@
 		io-channels = <&saradc 3>;
 		io-channel-names = "adc-detect";
 		keyup-threshold-microvolt = <1800000>;
-		pinctrl-0 = <&hp_det>;
+		pinctrl-0 = <&spk_con>;
 		pinctrl-names = "default";
-		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
-		spk-con-gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		//hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		//spk-con-gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
 		play-pause-key {
 			label = "playpause";
 			linux,code = <164>;
@@ -128,13 +128,14 @@
 		 * - PDN (power down when low)
 		 */
 		post-power-on-delay-ms = <200>;
-		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;  //WIFI_REG_ON_H
+		reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;  //BT_DISABLE_GPIO1_C6_d_1V8
 	};
 
 	rk_headset: rk-headset {
-		status = "disabled";
+		status = "okay";
 		compatible = "rockchip_headset";
-		headset_gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		headset_gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;//HP_DET_L_GPIO3_D5_d_3V3
+		spk_ctl_gpio  = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;//SPK_CTL_GPIO4_B4_u_3V3
 		pinctrl-names = "default";
 		pinctrl-0 = <&hp_det>;
 		io-channels = <&saradc 3>;
@@ -158,7 +159,7 @@
 		regulator-boot-on;
 		enable-active-high;
 		//gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
-		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&vcc_1v8_s0>;
 	};
 
@@ -216,9 +217,9 @@
 */
 	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd_s0_pwr>;
+		//gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		//pinctrl-names = "default";
+		//pinctrl-0 = <&sd_s0_pwr>;
 		regulator-name = "vcc_3v3_sd_s0";
 		enable-active-high;
 	};
@@ -229,20 +230,20 @@
 		clock-names = "ext_clock";
 		uart_rts_gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; //UART9_RTSn_M0_BT
 		pinctrl-names = "default", "rts_gpio";
-		pinctrl-0 = <&uart9m0_rtsn>, <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_irq_gpio>;
+		pinctrl-0 = <&uart9m0_rtsn>, <&bt_reset_gpio>;
 		pinctrl-1 = <&uart9_gpios>;
-		BT,reset_gpio    = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; //BT_REG_ON_H
-		BT,wake_gpio     = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;//HOST_WAKE_BT_H
-		BT,wake_host_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;//BT_WAKE_HOST_H
+		BT,reset_gpio    = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; //BT_DISABLE_GPIO0_B2_u_1V8
+		//BT,wake_gpio     = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;//HOST_WAKE_BT_H
+		//BT,wake_host_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;//BT_WAKE_HOST_H
 		status = "okay";
 	};
 
 	wireless_wlan: wireless-wlan {
 		compatible = "wlan-platdata";
 		wifi_chip_type = "ap6398s";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_irq>;
-		WIFI,host_wake_irq = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; //WIFI_WAKE_HOST_H
+	//	pinctrl-names = "default";
+	//	pinctrl-0 = <&wifi_host_wake_irq>;
+	//	WIFI,host_wake_irq = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; //GPIO2_B5_u_1V8_WF-BT_WAKEUP_IN
 	//	WIFI,poweren_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
@@ -251,58 +252,41 @@
            	compatible = "nk_io_control";
 			pinctrl-names = "default";
           	pinctrl-0 = <&ndj_io_gpio>;
-						
-//			vcc_5v {
-//				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
-//				gpio_function = <0>;
-//			};
-			
+									
 			vcc_12v {
-				gpio_num = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+				gpio_num = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
 				gpio_function = <0>;
-			};
+			};//VCC12_IO_EN_GPIO0_D3_u_3V3
 			
 			vcc_3v {
-				gpio_num = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+				gpio_num = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
 				gpio_function = <0>;
-			};
+			};//VCC3_IO_EN_GPIO4_A1_d_3V3
 			
            	hub_5V_reset {
-				gpio_num = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+				gpio_num = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; 
 				gpio_function = <3>;
-			};
+			};//HUB_RESET_GPIO4_B6_d_3V3
 			
 			4g_power {
-				gpio_num = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
 				gpio_function = <0>;
-			};
+			};//4G_PWREN_GPIO3_C7_u_3V3
 			
-           	wake_4g {
+         	wake_wifi_bt {
 				gpio_num = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
 				gpio_function = <0>;
-			};
+			};//GPIO2_B5_u_1V8_WF-BT_WAKEUP_IN
 			
 			air_mode_4g {
 				gpio_num = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
 				gpio_function = <0>;
-			};			
+			};	//GPIO2_B4_u_1V8_4G_AIR_MODE_IN		
 			
 			reset_4g {
 				gpio_num = <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
 				gpio_function = <3>;
-			};	
-/*
-			spk_ctl {
-				gpio_num = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
-				gpio_function = <0>;
-			};
-			
-			hp_det
-			 {
-				gpio_num = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
-				gpio_function = <1>;
-			};
-*/
+			};	//GPIO2_C3_d_1V8_4G_RESET_N_IN
 		};
 		
 		
@@ -310,12 +294,11 @@
                compatible = "simple-panel";
                backlight = <&backlight>;
                power-supply = <&vcc3v3_lcd_n>;
-			   vcc-5v-gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
-			   vddio-mipi = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;  //MIPIDIS_PWR_EN_1V8
-               enable-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //LCD_VDD_EN
-               reset-gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; //CH7511_RESET_N_1V8
-               edp-bl-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;  //LCD_BLK-PWR_EN
-               edp-bl-en = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD_BKL_EN_GPIO3_D4_d_3V3
+			   vcc-5v-gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;	//VCC5_IO_EN_GPIO4_B5_d_3V3		   
+               enable-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //LCD_VDD_EN_GPIO3_C6_u_3V3
+               reset-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; //CH7511_RESET_N_1V8
+               edp-bl-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;  //LCD_BKL_PWM3_3V3
+               edp-bl-en = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; //LCD_BKL_EN_GPIO3_A6_d_3V3
                bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
                bpc = <8>;
                prepare-delay-ms = <200>;
@@ -386,9 +369,22 @@
 	status = "okay";
 };
 
+&backlight1 {
+	pwms = <&pwm11 0 25000 0>;
+	status = "okay";
+};
+
 &combphy0_ps {
 	status = "okay";
 };
+
+/*
+&usbdrd_dwc3_0 {
+       dr_mode = "otg";
+       extcon = <&u2phy0>;
+       status = "okay";
+};
+*/
 
 &combphy1_ps {
 	status = "okay";
@@ -423,6 +419,10 @@
  * mipi_dcphy0 needs to be enabled
  * when dsi0 is enabled
  */
+&mipi_dcphy0 {
+	status = "disabled";
+}; 
+ 
 &dsi0 {
 	status = "disabled";
 };
@@ -432,14 +432,7 @@
 };
 
 &dsi0_in_vp3 {
-	status = "disabled";
-};
-
-&dsi0_panel {
-	power-supply = <&vcc3v3_lcd_n>;
-	reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_rst_gpio>;
+	status = "okay";
 };
 
 /*
@@ -493,7 +486,7 @@
 	/* rx_delay = <0x3f>; */
 
 	phy-handle = <&rgmii_phy>;
-	status = "disabled";
+	status = "okay";
 };
 
 &hdmi0 {
@@ -700,6 +693,12 @@
                 compatible = "atmel,24c256";
                 reg = <0x50>;
     };
+		
+	eeprom@53 {
+                //compatible = "atmel,24c02";
+                compatible = "atmel,24c256";
+                reg = <0x53>;
+    };
 #if 0
 	usbc0: fusb302@22 {
                 compatible = "fcs,fusb302";
@@ -824,9 +823,7 @@
 	};
 };
 
-&mipi_dcphy0 {
-	status = "okay";
-};
+
 
 &mipi_dcphy1 {
 	status = "disabled";
@@ -834,21 +831,21 @@
 
 &pcie2x1l2 {
 	phys = <&combphy0_ps PHY_TYPE_PCIE>;
-	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;//PCIE20x1_2_RSTn_GPIO3_D0_3V3
 	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
 };//MINIPCIE
 
 &pcie2x1l1 {
 	phys = <&combphy2_psu PHY_TYPE_PCIE>;
-	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;//PCIEX1_1_PERSTn_M1_L
 	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
 };//M.2 WIFI6
 
 &pcie2x1l0 {
 	phys = <&combphy1_ps PHY_TYPE_PCIE>;
-	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;  //PCIEx1_0_PERSTn_M1_L
 	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
 };//RTL8111H
@@ -899,7 +896,11 @@
 
 	headphone {
 		hp_det: hp-det {
-			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		
+		spk_con: spk-con {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -911,7 +912,7 @@
 
 	lcd {
 		lcd_rst_gpio: lcd-rst-gpio {
-			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -923,16 +924,16 @@
 
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
+/*
 	sdmmc {
 		sd_s0_pwr: sd-s0-pwr {
 			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
+*/
 	touch {
 		touch_gpio: touch-gpio {
 			rockchip,pins =
@@ -954,45 +955,35 @@
 		};
 
 		bt_reset_gpio: bt-reset-gpio {
-			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_gpio: bt-wake-gpio {
-			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_irq_gpio: bt-irq-gpio {
-			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
-
+/*
 	wireless-wlan {
 		wifi_host_wake_irq: wifi-host-wake-irq {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
-	
+*/	
 	
 	ndj_io_init{
 		ndj_io_gpio: ndj_io_gpio_col{
 				rockchip,pins =
-					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
-					<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
-					<4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,
-					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
-					<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
 					<2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
 					<2 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,
-					<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,  //vcc_5v
-					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO4_B5_d_3V3
-					<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO4_B6_d_3V3
-					<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO3_B0_u_3V3
-					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO3_B2_d_3V3
-					<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO3_B3_u_3V3
-					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO3_B4_u_3V3
-					<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,  //GPIO3_A7_u_3V3
-					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;  //GPIO3_A0_u_3V3
-
+					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,  //vcc_5v				
+					<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI0_MISO_M2_1V8 41
+					<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI4_MISO_M2_1V8 32
+					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI0_MOSI_M2_3V3 42
+					<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI4_MOSI_M2_1V8 33
+					<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI0_CLK_M2_1V8  43 
+					<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI4_CLK_M2_1V8  34
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,  //SPI0_CS0_M2_1V8  44
+					<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;  //SPI4_CS0_M2_1V8  35		 		
 		};
 	};
 };
@@ -1002,7 +993,7 @@
 };
 
 &route_dsi0 {
-	status = "okay";
+	status = "disabled";
 	connect = <&vp3_out_dsi0>;
 };
 
@@ -1014,6 +1005,11 @@
 &pwm10 {
 	status = "okay";
 	pinctrl-0 = <&pwm10m2_pins>;
+};
+
+&pwm11 {
+	status = "okay";
+	pinctrl-0 = <&pwm11m3_pins>;
 };
 
 &route_hdmi0 {
@@ -1050,14 +1046,9 @@
 	vmmc-supply = <&vcc_3v3_sd_s0>;
 };
 
-&uart9 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart9m0_xfer &uart9m0_ctsn>;
-};
-
 &u2phy0_otg {
 	status = "okay";
+	phy-supply = <&vcc5v0_host>;
 };
 
 &u2phy1_otg {
@@ -1071,7 +1062,7 @@
 &u2phy3_host {
 	phy-supply = <&vcc5v0_host>;
 };
-
+#if 0
 &usbdp_phy0 {
 	rockchip,dp-lane-mux = <2 3>;
 	status = "okay";
@@ -1099,17 +1090,12 @@
 	status = "okay";
 };
 
-&usbdrd_dwc3_0 {
-	dr_mode = "otg";
-	extcon = <&u2phy0>;
-	status = "okay";
-};
-
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 	maximum-speed = "high-speed";
 	status = "okay";
 };
+#endif
 
 &uart1 {
 	status = "okay";
@@ -1119,7 +1105,7 @@
 };
 
 &uart3 {
-	status = "okay";
+	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3m1_xfer>;
 };
@@ -1150,7 +1136,7 @@
 };
 
 &uart8 {
-	status = "okay";
+	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8m1_xfer>;
 };
@@ -1161,3 +1147,17 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart9m0_xfer &uart9m0_ctsn>;	
 };
+
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0m0_pins>;
+};
+
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1m1_pins>;
+};
\ No newline at end of file

--
Gitblit v1.6.2