From 2f7c68cb55ecb7331f2381deb497c27155f32faf Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 03 Jan 2024 09:43:39 +0000
Subject: [PATCH] update kernel to 5.10.198
---
kernel/drivers/spi/spi-mem.c | 398 +++++++++++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 362 insertions(+), 36 deletions(-)
diff --git a/kernel/drivers/spi/spi-mem.c b/kernel/drivers/spi/spi-mem.c
index 62a7b80..2c584c1 100644
--- a/kernel/drivers/spi/spi-mem.c
+++ b/kernel/drivers/spi/spi-mem.c
@@ -12,7 +12,7 @@
#include "internals.h"
-#define SPI_MEM_MAX_BUSWIDTH 4
+#define SPI_MEM_MAX_BUSWIDTH 8
/**
* spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
@@ -108,15 +108,24 @@
return 0;
case 2:
- if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
- (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+ if ((tx &&
+ (mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+ (!tx &&
+ (mode & (SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))))
return 0;
break;
case 4:
- if ((tx && (mode & SPI_TX_QUAD)) ||
- (!tx && (mode & SPI_RX_QUAD)))
+ if ((tx && (mode & (SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+ (!tx && (mode & (SPI_RX_QUAD | SPI_RX_OCTAL))))
+ return 0;
+
+ break;
+
+ case 8:
+ if ((tx && (mode & SPI_TX_OCTAL)) ||
+ (!tx && (mode & SPI_RX_OCTAL)))
return 0;
break;
@@ -128,8 +137,8 @@
return -ENOTSUPP;
}
-static bool spi_mem_default_supports_op(struct spi_mem *mem,
- const struct spi_mem_op *op)
+static bool spi_mem_check_buswidth(struct spi_mem *mem,
+ const struct spi_mem_op *op)
{
if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))
return false;
@@ -142,12 +151,34 @@
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;
- if (op->data.nbytes &&
+ if (op->data.dir != SPI_MEM_NO_DATA &&
spi_check_buswidth_req(mem, op->data.buswidth,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
return true;
+}
+
+bool spi_mem_dtr_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ if (op->cmd.nbytes != 2)
+ return false;
+
+ return spi_mem_check_buswidth(mem, op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_dtr_supports_op);
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+ return false;
+
+ if (op->cmd.nbytes != 1)
+ return false;
+
+ return spi_mem_check_buswidth(mem, op);
}
EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
@@ -161,7 +192,7 @@
static int spi_mem_check_op(const struct spi_mem_op *op)
{
- if (!op->cmd.buswidth)
+ if (!op->cmd.buswidth || !op->cmd.nbytes)
return -EINVAL;
if ((op->addr.nbytes && !op->addr.buswidth) ||
@@ -213,6 +244,45 @@
}
EXPORT_SYMBOL_GPL(spi_mem_supports_op);
+static int spi_mem_access_start(struct spi_mem *mem)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ /*
+ * Flush the message queue before executing our SPI memory
+ * operation to prevent preemption of regular SPI transfers.
+ */
+ spi_flush_queue(ctlr);
+
+ if (ctlr->auto_runtime_pm) {
+ int ret;
+
+ ret = pm_runtime_get_sync(ctlr->dev.parent);
+ if (ret < 0) {
+ pm_runtime_put_noidle(ctlr->dev.parent);
+ dev_err(&ctlr->dev, "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ mutex_lock(&ctlr->bus_lock_mutex);
+ mutex_lock(&ctlr->io_mutex);
+
+ return 0;
+}
+
+static void spi_mem_access_end(struct spi_mem *mem)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ mutex_unlock(&ctlr->io_mutex);
+ mutex_unlock(&ctlr->bus_lock_mutex);
+
+ if (ctlr->auto_runtime_pm)
+ pm_runtime_put(ctlr->dev.parent);
+}
+
/**
* spi_mem_exec_op() - Execute a memory operation
* @mem: the SPI memory
@@ -241,31 +311,14 @@
if (!spi_mem_internal_supports_op(mem, op))
return -ENOTSUPP;
- if (ctlr->mem_ops) {
- /*
- * Flush the message queue before executing our SPI memory
- * operation to prevent preemption of regular SPI transfers.
- */
- spi_flush_queue(ctlr);
+ if (ctlr->mem_ops && !mem->spi->cs_gpiod) {
+ ret = spi_mem_access_start(mem);
+ if (ret)
+ return ret;
- if (ctlr->auto_runtime_pm) {
- ret = pm_runtime_get_sync(ctlr->dev.parent);
- if (ret < 0) {
- dev_err(&ctlr->dev,
- "Failed to power device: %d\n",
- ret);
- return ret;
- }
- }
-
- mutex_lock(&ctlr->bus_lock_mutex);
- mutex_lock(&ctlr->io_mutex);
ret = ctlr->mem_ops->exec_op(mem, op);
- mutex_unlock(&ctlr->io_mutex);
- mutex_unlock(&ctlr->bus_lock_mutex);
- if (ctlr->auto_runtime_pm)
- pm_runtime_put(ctlr->dev.parent);
+ spi_mem_access_end(mem);
/*
* Some controllers only optimize specific paths (typically the
@@ -276,8 +329,7 @@
return ret;
}
- tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
- op->dummy.nbytes;
+ tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
/*
* Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
@@ -292,7 +344,7 @@
tmpbuf[0] = op->cmd.opcode;
xfers[xferpos].tx_buf = tmpbuf;
- xfers[xferpos].len = sizeof(op->cmd.opcode);
+ xfers[xferpos].len = op->cmd.nbytes;
xfers[xferpos].tx_nbits = op->cmd.buswidth;
spi_message_add_tail(&xfers[xferpos], &msg);
xferpos++;
@@ -390,12 +442,12 @@
struct spi_controller *ctlr = mem->spi->controller;
size_t len;
- len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
-
if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
return ctlr->mem_ops->adjust_op_size(mem, op);
if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
+ len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
+
if (len > spi_max_transfer_size(mem->spi))
return -EINVAL;
@@ -411,6 +463,280 @@
}
EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_mem_op op = desc->info.op_tmpl;
+ int ret;
+
+ op.addr.val = desc->info.offset + offs;
+ op.data.buf.in = buf;
+ op.data.nbytes = len;
+ ret = spi_mem_adjust_op_size(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ ret = spi_mem_exec_op(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ return op.data.nbytes;
+}
+
+static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf)
+{
+ struct spi_mem_op op = desc->info.op_tmpl;
+ int ret;
+
+ op.addr.val = desc->info.offset + offs;
+ op.data.buf.out = buf;
+ op.data.nbytes = len;
+ ret = spi_mem_adjust_op_size(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ ret = spi_mem_exec_op(desc->mem, &op);
+ if (ret)
+ return ret;
+
+ return op.data.nbytes;
+}
+
+/**
+ * spi_mem_dirmap_create() - Create a direct mapping descriptor
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * This function is creating a direct mapping descriptor which can then be used
+ * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write().
+ * If the SPI controller driver does not support direct mapping, this function
+ * falls back to an implementation using spi_mem_exec_op(), so that the caller
+ * doesn't have to bother implementing a fallback on his own.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_mem *mem,
+ const struct spi_mem_dirmap_info *info)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+ struct spi_mem_dirmap_desc *desc;
+ int ret = -ENOTSUPP;
+
+ /* Make sure the number of address cycles is between 1 and 8 bytes. */
+ if (!info->op_tmpl.addr.nbytes || info->op_tmpl.addr.nbytes > 8)
+ return ERR_PTR(-EINVAL);
+
+ /* data.dir should either be SPI_MEM_DATA_IN or SPI_MEM_DATA_OUT. */
+ if (info->op_tmpl.data.dir == SPI_MEM_NO_DATA)
+ return ERR_PTR(-EINVAL);
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return ERR_PTR(-ENOMEM);
+
+ desc->mem = mem;
+ desc->info = *info;
+ if (ctlr->mem_ops && ctlr->mem_ops->dirmap_create)
+ ret = ctlr->mem_ops->dirmap_create(desc);
+
+ if (ret) {
+ desc->nodirmap = true;
+ if (!spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+ ret = -ENOTSUPP;
+ else
+ ret = 0;
+ }
+
+ if (ret) {
+ kfree(desc);
+ return ERR_PTR(ret);
+ }
+
+ return desc;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_create);
+
+/**
+ * spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor
+ * @desc: the direct mapping descriptor to destroy
+ *
+ * This function destroys a direct mapping descriptor previously created by
+ * spi_mem_dirmap_create().
+ */
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+
+ if (!desc->nodirmap && ctlr->mem_ops && ctlr->mem_ops->dirmap_destroy)
+ ctlr->mem_ops->dirmap_destroy(desc);
+
+ kfree(desc);
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy);
+
+static void devm_spi_mem_dirmap_release(struct device *dev, void *res)
+{
+ struct spi_mem_dirmap_desc *desc = *(struct spi_mem_dirmap_desc **)res;
+
+ spi_mem_dirmap_destroy(desc);
+}
+
+/**
+ * devm_spi_mem_dirmap_create() - Create a direct mapping descriptor and attach
+ * it to a device
+ * @dev: device the dirmap desc will be attached to
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * devm_ variant of the spi_mem_dirmap_create() function. See
+ * spi_mem_dirmap_create() for more details.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+devm_spi_mem_dirmap_create(struct device *dev, struct spi_mem *mem,
+ const struct spi_mem_dirmap_info *info)
+{
+ struct spi_mem_dirmap_desc **ptr, *desc;
+
+ ptr = devres_alloc(devm_spi_mem_dirmap_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ desc = spi_mem_dirmap_create(mem, info);
+ if (IS_ERR(desc)) {
+ devres_free(ptr);
+ } else {
+ *ptr = desc;
+ devres_add(dev, ptr);
+ }
+
+ return desc;
+}
+EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_create);
+
+static int devm_spi_mem_dirmap_match(struct device *dev, void *res, void *data)
+{
+ struct spi_mem_dirmap_desc **ptr = res;
+
+ if (WARN_ON(!ptr || !*ptr))
+ return 0;
+
+ return *ptr == data;
+}
+
+/**
+ * devm_spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor attached
+ * to a device
+ * @dev: device the dirmap desc is attached to
+ * @desc: the direct mapping descriptor to destroy
+ *
+ * devm_ variant of the spi_mem_dirmap_destroy() function. See
+ * spi_mem_dirmap_destroy() for more details.
+ */
+void devm_spi_mem_dirmap_destroy(struct device *dev,
+ struct spi_mem_dirmap_desc *desc)
+{
+ devres_release(dev, devm_spi_mem_dirmap_release,
+ devm_spi_mem_dirmap_match, desc);
+}
+EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_destroy);
+
+/**
+ * spi_mem_dirmap_read() - Read data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start reading from. Note that this is not an absolute
+ * offset, but the offset within the direct mapping which already has
+ * its own offset
+ * @len: length in bytes
+ * @buf: destination buffer. This buffer must be DMA-able
+ *
+ * This function reads data from a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data read from the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_read() again when that happens.
+ */
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap) {
+ ret = spi_mem_no_dirmap_read(desc, offs, len, buf);
+ } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_read) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_read(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ } else {
+ ret = -ENOTSUPP;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_read);
+
+/**
+ * spi_mem_dirmap_write() - Write data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start writing from. Note that this is not an absolute
+ * offset, but the offset within the direct mapping which already has
+ * its own offset
+ * @len: length in bytes
+ * @buf: source buffer. This buffer must be DMA-able
+ *
+ * This function writes data to a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data written to the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_write() again when that happens.
+ */
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+ u64 offs, size_t len, const void *buf)
+{
+ struct spi_controller *ctlr = desc->mem->spi->controller;
+ ssize_t ret;
+
+ if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_OUT)
+ return -EINVAL;
+
+ if (!len)
+ return 0;
+
+ if (desc->nodirmap) {
+ ret = spi_mem_no_dirmap_write(desc, offs, len, buf);
+ } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_write) {
+ ret = spi_mem_access_start(desc->mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->dirmap_write(desc, offs, len, buf);
+
+ spi_mem_access_end(desc->mem);
+ } else {
+ ret = -ENOTSUPP;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_write);
+
static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
{
return container_of(drv, struct spi_mem_driver, spidrv.driver);
--
Gitblit v1.6.2