From 15ade055295d13f95d49e3d99b09f3bbfb4a43e7 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 06 Nov 2023 07:25:24 +0000
Subject: [PATCH] add at24 driver
---
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi | 296 ++++++++++++++++++++++++++++++++--------------------------
1 files changed, 164 insertions(+), 132 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
old mode 100755
new mode 100644
index 2c59a55..f45ce09
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
@@ -15,13 +15,6 @@
model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
- rk_headset: rk-headset {
- compatible = "rockchip_headset";
- headset_gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det>;
- };
-
vcc2v5_sys: vcc2v5-ddr {
compatible = "regulator-fixed";
regulator-name = "vcc2v5-sys";
@@ -92,40 +85,107 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- };
+ };
#endif
- nk_io_init {
- compatible = "nk_io_control";
- usb_en_oc_gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; //USB_EN_OC_GPIO0_A5
- lcd_bk_en_gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
- lcd_pwblk_gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
- vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
- hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
- hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
-// hub_host3_5V_rest_gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
- vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
- vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
- en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
- reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
- air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
- wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
-
- edp_enable_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
- edp_gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; //7511_GPIO0-GPIO3_D2
- edp_gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; //7511_GPIO1-GPIO3_D3
- edp_gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; //7511_GPIO2-GPIO3_D4
- edp_gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; //7511_GPIO3-GPIO3_D5
- edp_reset = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
-// tp_reset = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
-// vddio_mipi = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
-
- wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
-
- pinctrl-names = "default";
- pinctrl-0 = <&nk_io_gpio>;
- nodka_lvds = <9>;
- };
+ ndj_io_init {
+ compatible = "nk_io_control";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nk_io_gpio>;
+
+ //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+
+ vcc_5v {
+ gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
+ gpio_function = <0>;
+ };
+
+ vcc_12v {
+ gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
+ gpio_function = <0>;
+ };
+
+ hub_host2_rst {
+ gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
+ gpio_function = <3>;
+ };
+
+ hub_host3 {
+ gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
+ gpio_function = <0>;
+ };
+
+ wake_4g {
+ gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
+ gpio_function = <0>;
+ };
+
+ air_mode_4g {
+ gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
+ gpio_function = <0>;
+ };
+
+ reset_4g {
+ gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
+ gpio_function = <3>;
+ };
+
+ en_4g {
+ gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
+ gpio_function = <0>;
+ };
+
+ hp_en {
+ gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
+ gpio_function = <0>;
+ };
+
+ wifi_power_en {
+ gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
+ gpio_function = <0>;
+ };
+ #if 0
+ do1 {
+ gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ do2 {
+ gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ gpio_function = <0>;
+ };
+
+ do3 {
+ gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ gpio_function = <0>;
+ };
+
+ do4 {
+ gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+ gpio_function = <0>;
+ };
+
+ do5 {
+ gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ do6 {
+ gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ do7 {
+ gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
+ gpio_function = <0>;
+ };
+
+ di1 {
+ gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
+ gpio_function = <1>;
+ };
+ #endif
+};
};
&combphy0_us {
@@ -141,11 +201,11 @@
};
&csi2_dphy_hw {
- status = "okay";
+ status = "disabled";
};
&csi2_dphy0 {
- status = "okay";
+ status = "disabled";
ports {
#address-cells = <1>;
@@ -189,7 +249,7 @@
* when dsi0 is enabled
*/
&dsi0 {
- status = "okay";
+ status = "disabled";
};
&dsi0_in_vp0 {
@@ -197,7 +257,7 @@
};
&dsi0_in_vp1 {
- status = "okay";
+ status = "disabled";
};
&dsi0_panel {
@@ -303,27 +363,8 @@
power-supply = <&vcc3v3_lcd0_n>;
};
-&i2c3 {
- status = "okay";
- //mac eeprom
- eeprom@51 {
- //compatible = "atmel,24c02";
- compatible = "atmel,24c256";
- reg = <0x51>;
- };
-
- //nk-mcu
- nkmcu@15 {
- compatible = "nk_mcu";
- reg = <0x15>;
- };
-
-
-
-};
-
&i2c4 {
- status = "okay";
+ status = "disabled";
gc8034: gc8034@37 {
compatible = "galaxycore,gc8034";
status = "okay";
@@ -369,7 +410,7 @@
};
};
ov5695: ov5695@36 {
- status = "okay";
+ status = "disabled";
compatible = "ovti,ov5695";
reg = <0x36>;
clocks = <&cru CLK_CIF_OUT>;
@@ -407,7 +448,7 @@
};
&video_phy0 {
- status = "okay";
+ status = "disabled";
};
&video_phy1 {
@@ -425,13 +466,13 @@
};
&pinctrl {
-// cam {
-// camera_pwr: camera-pwr {
-// rockchip,pins =
-// /* camera power en */
-// <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-// };
-// };
+ cam {
+ camera_pwr: camera-pwr {
+ rockchip,pins =
+ /* camera power en */
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
headphone {
hp_det: hp-det {
rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
@@ -440,28 +481,53 @@
wireless-wlan {
wifi_host_wake_irq: wifi-host-wake-irq {
- rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wireless-bluetooth {
- uart1_gpios: uart1-gpios {
- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ uart8_gpios: uart8-gpios {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
nk_io_init{
nk_io_gpio: nk-io-gpio{
- rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
+ <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
+ <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
+ <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+};
+
+&rk809_sound {
+ hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
};
&rkisp {
- status = "okay";
+ status = "disabled";
};
&rkisp_mmu {
- status = "okay";
+ status = "disabled";
};
&rkisp_vir0 {
@@ -479,7 +545,7 @@
};
&route_dsi0 {
- status = "okay";
+ status = "disabled";
connect = <&vp1_out_dsi0>;
};
@@ -493,23 +559,19 @@
};
&sdmmc2 {
- status = "disabled";
-};
-
-&sdmmc1 {
- max-frequency = <150000000>;
- supports-sdio;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
- sd-uhs-sdr104;
- status = "okay";
+ max-frequency = <150000000>;
+ supports-sdio;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
};
&spdif_8ch {
@@ -519,13 +581,13 @@
};
&uart8 {
- status = "disabled";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};
&vcc3v3_lcd0_n {
- gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -537,7 +599,7 @@
&wireless_wlan {
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_irq>;
- WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
+ WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};
&wireless_bluetooth {
@@ -545,42 +607,12 @@
clocks = <&rk809 1>;
clock-names = "ext_clock";
//wifi-bt-power-toggle;
- uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
- BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "rts_gpio";
- pinctrl-0 = <&uart1m0_rtsn>;
- pinctrl-1 = <&uart1_gpios>;
+ pinctrl-0 = <&uart8m0_rtsn>;
+ pinctrl-1 = <&uart8_gpios>;
BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
- status = "disabled";
-};
-
-&uart0 {
status = "okay";
-};
-
-&uart3 {
- status = "okay";
- pinctrl-0 = <&uart3m1_xfer>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-0 = <&uart4m1_xfer>;
-};
-
-&uart5 {
- status = "okay";
- pinctrl-0 = <&uart5m1_xfer>;
-};
-
-&uart7 {
- status = "okay";
- pinctrl-0 = <&uart7m1_xfer>;
-};
-
-&uart9 {
- status = "okay";
- pinctrl-0 = <&uart9m1_xfer>;
};
--
Gitblit v1.6.2