From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/usb/gadget/udc/atmel_usba_udc.c | 315 ++++++++++++++++++++++++++++++++++++----------------
1 files changed, 216 insertions(+), 99 deletions(-)
diff --git a/kernel/drivers/usb/gadget/udc/atmel_usba_udc.c b/kernel/drivers/usb/gadget/udc/atmel_usba_udc.c
index 23691a3..2b893bc 100644
--- a/kernel/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/kernel/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/ctype.h>
+#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/delay.h>
@@ -88,7 +89,7 @@
size_t len, remaining, actual = 0;
char tmpbuf[38];
- if (!access_ok(VERIFY_WRITE, buf, nbytes))
+ if (!access_ok(buf, nbytes))
return -EFAULT;
inode_lock(file_inode(file));
@@ -184,7 +185,7 @@
return 0;
}
-const struct file_operations queue_dbg_fops = {
+static const struct file_operations queue_dbg_fops = {
.owner = THIS_MODULE,
.open = queue_dbg_open,
.llseek = no_llseek,
@@ -192,7 +193,7 @@
.release = queue_dbg_release,
};
-const struct file_operations regs_dbg_fops = {
+static const struct file_operations regs_dbg_fops = {
.owner = THIS_MODULE,
.open = regs_dbg_open,
.llseek = generic_file_llseek,
@@ -226,7 +227,7 @@
struct dentry *root;
struct resource *regs_resource;
- root = debugfs_create_dir(udc->gadget.name, NULL);
+ root = debugfs_create_dir(udc->gadget.name, usb_debug_root);
udc->debugfs_root = root;
regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
@@ -327,6 +328,7 @@
switch (fifo_mode) {
default:
fifo_mode = 0;
+ fallthrough;
case 0:
udc->fifo_cfg = NULL;
n = 0;
@@ -358,8 +360,20 @@
return udc->int_enb_cache;
}
-static inline void usba_int_enb_set(struct usba_udc *udc, u32 val)
+static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask)
{
+ u32 val;
+
+ val = udc->int_enb_cache | mask;
+ usba_writel(udc, INT_ENB, val);
+ udc->int_enb_cache = val;
+}
+
+static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask)
+{
+ u32 val;
+
+ val = udc->int_enb_cache & ~mask;
usba_writel(udc, INT_ENB, val);
udc->int_enb_cache = val;
}
@@ -631,14 +645,12 @@
if (ep->can_dma) {
u32 ctrl;
- usba_int_enb_set(udc, usba_int_enb_get(udc) |
- USBA_BF(EPT_INT, 1 << ep->index) |
+ usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) |
USBA_BF(DMA_INT, 1 << ep->index));
ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
usba_ep_writel(ep, CTL_ENB, ctrl);
} else {
- usba_int_enb_set(udc, usba_int_enb_get(udc) |
- USBA_BF(EPT_INT, 1 << ep->index));
+ usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index));
}
spin_unlock_irqrestore(&udc->lock, flags);
@@ -664,13 +676,7 @@
if (!ep->ep.desc) {
spin_unlock_irqrestore(&udc->lock, flags);
- /* REVISIT because this driver disables endpoints in
- * reset_all_endpoints() before calling disconnect(),
- * most gadget drivers would trigger this non-error ...
- */
- if (udc->gadget.speed != USB_SPEED_UNKNOWN)
- DBG(DBG_ERR, "ep_disable: %s not enabled\n",
- ep->ep.name);
+ DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
return -EINVAL;
}
ep->ep.desc = NULL;
@@ -682,8 +688,7 @@
usba_dma_readl(ep, STATUS);
}
usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
- usba_int_enb_set(udc, usba_int_enb_get(udc) &
- ~USBA_BF(EPT_INT, 1 << ep->index));
+ usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index));
request_complete_list(ep, &req_list, -ESHUTDOWN);
@@ -1023,6 +1028,7 @@
return 0;
}
+static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on);
static int atmel_usba_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int atmel_usba_stop(struct usb_gadget *gadget);
@@ -1050,16 +1056,19 @@
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
+ ep->nr_banks = 1;
break;
case USB_ENDPOINT_XFER_ISOC:
ep->fifo_size = 1024;
- ep->nr_banks = 2;
+ if (ep->udc->ep_prealloc)
+ ep->nr_banks = 2;
break;
case USB_ENDPOINT_XFER_BULK:
ep->fifo_size = 512;
- ep->nr_banks = 1;
+ if (ep->udc->ep_prealloc)
+ ep->nr_banks = 1;
break;
case USB_ENDPOINT_XFER_INT:
@@ -1069,7 +1078,8 @@
else
ep->fifo_size =
roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize));
- ep->nr_banks = 1;
+ if (ep->udc->ep_prealloc)
+ ep->nr_banks = 1;
break;
}
@@ -1085,8 +1095,6 @@
USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3);
ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
-
- ep->udc->configured_ep++;
}
return _ep;
@@ -1096,6 +1104,7 @@
.get_frame = usba_udc_get_frame,
.wakeup = usba_udc_wakeup,
.set_selfpowered = usba_udc_set_selfpowered,
+ .pullup = atmel_usba_pullup,
.udc_start = atmel_usba_start,
.udc_stop = atmel_usba_stop,
.match_ep = atmel_usba_match_ep,
@@ -1111,7 +1120,7 @@
.bInterval = 1,
};
-static struct usb_gadget usba_gadget_template = {
+static const struct usb_gadget usba_gadget_template = {
.ops = &usba_udc_ops,
.max_speed = USB_SPEED_HIGH,
.name = "atmel_usba_udc",
@@ -1696,6 +1705,9 @@
}
}
+static int start_clock(struct usba_udc *udc);
+static void stop_clock(struct usba_udc *udc);
+
static irqreturn_t usba_udc_irq(int irq, void *devid)
{
struct usba_udc *udc = devid;
@@ -1710,10 +1722,13 @@
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
+ usba_writel(udc, INT_CLR, USBA_DET_SUSPEND|USBA_WAKE_UP);
+ usba_int_enb_set(udc, USBA_WAKE_UP);
+ usba_int_enb_clear(udc, USBA_DET_SUSPEND);
+ udc->suspended = true;
toggle_bias(udc, 0);
- usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
- usba_int_enb_set(udc, int_enb | USBA_WAKE_UP);
udc->bias_pulse_needed = true;
+ stop_clock(udc);
DBG(DBG_BUS, "Suspend detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
&& udc->driver && udc->driver->suspend) {
@@ -1724,14 +1739,17 @@
}
if (status & USBA_WAKE_UP) {
+ start_clock(udc);
toggle_bias(udc, 1);
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
- usba_int_enb_set(udc, int_enb & ~USBA_WAKE_UP);
DBG(DBG_BUS, "Wake Up CPU detected\n");
}
if (status & USBA_END_OF_RESUME) {
+ udc->suspended = false;
usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
+ usba_int_enb_clear(udc, USBA_WAKE_UP);
+ usba_int_enb_set(udc, USBA_DET_SUSPEND);
generate_bias_pulse(udc);
DBG(DBG_BUS, "Resume detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
@@ -1746,6 +1764,8 @@
if (dma_status) {
int i;
+ usba_int_enb_set(udc, USBA_DET_SUSPEND);
+
for (i = 1; i <= USBA_NR_DMAS; i++)
if (dma_status & (1 << i))
usba_dma_irq(udc, &udc->usba_ep[i]);
@@ -1754,6 +1774,8 @@
ep_status = USBA_BFEXT(EPT_INT, status);
if (ep_status) {
int i;
+
+ usba_int_enb_set(udc, USBA_DET_SUSPEND);
for (i = 0; i < udc->num_ep; i++)
if (ep_status & (1 << i)) {
@@ -1766,9 +1788,11 @@
if (status & USBA_END_OF_RESET) {
struct usba_ep *ep0, *ep;
- int i, n;
+ int i;
- usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
+ usba_writel(udc, INT_CLR,
+ USBA_END_OF_RESET|USBA_END_OF_RESUME
+ |USBA_DET_SUSPEND|USBA_WAKE_UP);
generate_bias_pulse(udc);
reset_all_endpoints(udc);
@@ -1795,7 +1819,12 @@
| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
usba_ep_writel(ep0, CTL_ENB,
USBA_EPT_ENABLE | USBA_RX_SETUP);
- usba_int_enb_set(udc, int_enb | USBA_BF(EPT_INT, 1) |
+
+ /* If we get reset while suspended... */
+ udc->suspended = false;
+ usba_int_enb_clear(udc, USBA_WAKE_UP);
+
+ usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) |
USBA_DET_SUSPEND | USBA_END_OF_RESUME);
/*
@@ -1807,13 +1836,14 @@
"ODD: EP0 configuration is invalid!\n");
/* Preallocate other endpoints */
- n = fifo_mode ? udc->num_ep : udc->configured_ep;
- for (i = 1; i < n; i++) {
+ for (i = 1; i < udc->num_ep; i++) {
ep = &udc->usba_ep[i];
- usba_ep_writel(ep, CFG, ep->ept_cfg);
- if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
- dev_err(&udc->pdev->dev,
- "ODD: EP%d configuration is invalid!\n", i);
+ if (ep->ep.claimed) {
+ usba_ep_writel(ep, CFG, ep->ept_cfg);
+ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
+ dev_err(&udc->pdev->dev,
+ "ODD: EP%d configuration is invalid!\n", i);
+ }
}
}
@@ -1828,6 +1858,8 @@
if (udc->clocked)
return 0;
+
+ pm_stay_awake(&udc->pdev->dev);
ret = clk_prepare_enable(udc->pclk);
if (ret)
@@ -1851,6 +1883,8 @@
clk_disable_unprepare(udc->pclk);
udc->clocked = false;
+
+ pm_relax(&udc->pdev->dev);
}
static int usba_start(struct usba_udc *udc)
@@ -1862,9 +1896,19 @@
if (ret)
return ret;
+ if (udc->suspended)
+ return 0;
+
spin_lock_irqsave(&udc->lock, flags);
toggle_bias(udc, 1);
usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+ /* Clear all requested and pending interrupts... */
+ usba_writel(udc, INT_ENB, 0);
+ udc->int_enb_cache = 0;
+ usba_writel(udc, INT_CLR,
+ USBA_END_OF_RESET|USBA_END_OF_RESUME
+ |USBA_DET_SUSPEND|USBA_WAKE_UP);
+ /* ...and enable just 'reset' IRQ to get us started */
usba_int_enb_set(udc, USBA_END_OF_RESET);
spin_unlock_irqrestore(&udc->lock, flags);
@@ -1874,6 +1918,9 @@
static void usba_stop(struct usba_udc *udc)
{
unsigned long flags;
+
+ if (udc->suspended)
+ return;
spin_lock_irqsave(&udc->lock, flags);
udc->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1902,16 +1949,35 @@
if (vbus) {
usba_start(udc);
} else {
- usba_stop(udc);
-
+ udc->suspended = false;
if (udc->driver->disconnect)
udc->driver->disconnect(&udc->gadget);
+
+ usba_stop(udc);
}
udc->vbus_prev = vbus;
}
mutex_unlock(&udc->vbus_mutex);
return IRQ_HANDLED;
+}
+
+static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
+ unsigned long flags;
+ u32 ctrl;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ ctrl = usba_readl(udc, CTRL);
+ if (is_on)
+ ctrl &= ~USBA_DETACH;
+ else
+ ctrl |= USBA_DETACH;
+ usba_writel(udc, CTRL, ctrl);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
}
static int atmel_usba_start(struct usb_gadget *gadget,
@@ -1962,9 +2028,7 @@
if (udc->vbus_pin)
disable_irq(gpiod_to_irq(udc->vbus_pin));
- if (fifo_mode == 0)
- udc->configured_ep = 1;
-
+ udc->suspended = false;
usba_stop(udc);
udc->driver = NULL;
@@ -1993,38 +2057,106 @@
.pulse_bias = at91sam9g45_pulse_bias,
};
+static const struct usba_ep_config ep_config_sam9[] __initconst = {
+ { .nr_banks = 1 }, /* ep 0 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */
+ { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */
+ { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */
+ { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */
+ { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */
+};
+
+static const struct usba_ep_config ep_config_sama5[] __initconst = {
+ { .nr_banks = 1 }, /* ep 0 */
+ { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */
+ { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */
+ { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */
+ { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */
+};
+
+static const struct usba_udc_config udc_at91sam9rl_cfg = {
+ .errata = &at91sam9rl_errata,
+ .config = ep_config_sam9,
+ .num_ep = ARRAY_SIZE(ep_config_sam9),
+ .ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_at91sam9g45_cfg = {
+ .errata = &at91sam9g45_errata,
+ .config = ep_config_sam9,
+ .num_ep = ARRAY_SIZE(ep_config_sam9),
+ .ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_sama5d3_cfg = {
+ .config = ep_config_sama5,
+ .num_ep = ARRAY_SIZE(ep_config_sama5),
+ .ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_sam9x60_cfg = {
+ .num_ep = ARRAY_SIZE(ep_config_sam9),
+ .config = ep_config_sam9,
+ .ep_prealloc = false,
+};
+
static const struct of_device_id atmel_udc_dt_ids[] = {
- { .compatible = "atmel,at91sam9rl-udc", .data = &at91sam9rl_errata },
- { .compatible = "atmel,at91sam9g45-udc", .data = &at91sam9g45_errata },
- { .compatible = "atmel,sama5d3-udc" },
+ { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg },
+ { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg },
+ { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg },
+ { .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
+static const struct of_device_id atmel_pmc_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g45-pmc" },
+ { .compatible = "atmel,at91sam9rl-pmc" },
+ { .compatible = "atmel,at91sam9x5-pmc" },
+ { /* sentinel */ }
+};
+
static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
struct usba_udc *udc)
{
- u32 val;
- const char *name;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
struct device_node *pp;
int i, ret;
struct usba_ep *eps, *ep;
+ const struct usba_udc_config *udc_config;
match = of_match_node(atmel_udc_dt_ids, np);
if (!match)
return ERR_PTR(-EINVAL);
- udc->errata = match->data;
- udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
- if (IS_ERR(udc->pmc))
- udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc");
- if (IS_ERR(udc->pmc))
- udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
- if (udc->errata && IS_ERR(udc->pmc))
- return ERR_CAST(udc->pmc);
+ udc_config = match->data;
+ udc->ep_prealloc = udc_config->ep_prealloc;
+ udc->errata = udc_config->errata;
+ if (udc->errata) {
+ pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids,
+ NULL);
+ if (!pp)
+ return ERR_PTR(-ENODEV);
+
+ udc->pmc = syscon_node_to_regmap(pp);
+ of_node_put(pp);
+ if (IS_ERR(udc->pmc))
+ return ERR_CAST(udc->pmc);
+ }
udc->num_ep = 0;
@@ -2032,10 +2164,7 @@
GPIOD_IN);
if (fifo_mode == 0) {
- pp = NULL;
- while ((pp = of_get_next_child(np, pp)))
- udc->num_ep++;
- udc->configured_ep = 1;
+ udc->num_ep = udc_config->num_ep;
} else {
udc->num_ep = usba_config_fifo_table(udc);
}
@@ -2049,60 +2178,40 @@
INIT_LIST_HEAD(&eps[0].ep.ep_list);
- pp = NULL;
i = 0;
- while ((pp = of_get_next_child(np, pp)) && i < udc->num_ep) {
+ while (i < udc->num_ep) {
+ const struct usba_ep_config *ep_cfg = &udc_config->config[i];
+
ep = &eps[i];
- ret = of_property_read_u32(pp, "reg", &val);
- if (ret) {
- dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret);
- goto err;
- }
- ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : val;
+ ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i;
- ret = of_property_read_u32(pp, "atmel,fifo-size", &val);
- if (ret) {
- dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
- goto err;
- }
+ /* Only the first EP is 64 bytes */
+ if (ep->index == 0)
+ ep->fifo_size = 64;
+ else
+ ep->fifo_size = 1024;
+
if (fifo_mode) {
- if (val < udc->fifo_cfg[i].fifo_size) {
+ if (ep->fifo_size < udc->fifo_cfg[i].fifo_size)
dev_warn(&pdev->dev,
- "Using max fifo-size value from DT\n");
- ep->fifo_size = val;
- } else {
+ "Using default max fifo-size value\n");
+ else
ep->fifo_size = udc->fifo_cfg[i].fifo_size;
- }
- } else {
- ep->fifo_size = val;
}
- ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
- if (ret) {
- dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
- goto err;
- }
+ ep->nr_banks = ep_cfg->nr_banks;
if (fifo_mode) {
- if (val < udc->fifo_cfg[i].nr_banks) {
+ if (ep->nr_banks < udc->fifo_cfg[i].nr_banks)
dev_warn(&pdev->dev,
- "Using max nb-banks value from DT\n");
- ep->nr_banks = val;
- } else {
+ "Using default max nb-banks value\n");
+ else
ep->nr_banks = udc->fifo_cfg[i].nr_banks;
- }
- } else {
- ep->nr_banks = val;
}
- ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
- ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
+ ep->can_dma = ep_cfg->can_dma;
+ ep->can_isoc = ep_cfg->can_isoc;
- ret = of_property_read_string(pp, "name", &name);
- if (ret) {
- dev_err(&pdev->dev, "of_probe: name error(%d)\n", ret);
- goto err;
- }
sprintf(ep->name, "ep%d", ep->index);
ep->ep.name = ep->name;
@@ -2284,6 +2393,7 @@
mutex_lock(&udc->vbus_mutex);
if (!device_may_wakeup(dev)) {
+ udc->suspended = false;
usba_stop(udc);
goto out;
}
@@ -2293,9 +2403,12 @@
* to request vbus irq, assuming always on.
*/
if (udc->vbus_pin) {
+ /* FIXME: right to stop here...??? */
usba_stop(udc);
enable_irq_wake(gpiod_to_irq(udc->vbus_pin));
}
+
+ enable_irq_wake(udc->irq);
out:
mutex_unlock(&udc->vbus_mutex);
@@ -2310,8 +2423,12 @@
if (!udc->driver)
return 0;
- if (device_may_wakeup(dev) && udc->vbus_pin)
- disable_irq_wake(gpiod_to_irq(udc->vbus_pin));
+ if (device_may_wakeup(dev)) {
+ if (udc->vbus_pin)
+ disable_irq_wake(gpiod_to_irq(udc->vbus_pin));
+
+ disable_irq_wake(udc->irq);
+ }
/* If Vbus is present, enable the controller and wait for reset */
mutex_lock(&udc->vbus_mutex);
--
Gitblit v1.6.2