From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/net/phy/microchip.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/kernel/drivers/net/phy/microchip.c b/kernel/drivers/net/phy/microchip.c
index a644e8e..375bbd6 100644
--- a/kernel/drivers/net/phy/microchip.c
+++ b/kernel/drivers/net/phy/microchip.c
@@ -326,6 +326,37 @@
return genphy_config_aneg(phydev);
}
+static void lan88xx_link_change_notify(struct phy_device *phydev)
+{
+ int temp;
+
+ /* At forced 100 F/H mode, chip may fail to set mode correctly
+ * when cable is switched between long(~50+m) and short one.
+ * As workaround, set to 10 before setting to 100
+ * at forced 100 F/H mode.
+ */
+ if (!phydev->autoneg && phydev->speed == 100) {
+ /* disable phy interrupt */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
+ phy_write(phydev, LAN88XX_INT_MASK, temp);
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
+ phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
+ temp |= BMCR_SPEED100;
+ phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
+
+ /* clear pending interrupt generated while workaround */
+ temp = phy_read(phydev, LAN88XX_INT_STS);
+
+ /* enable phy interrupt back */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
+ phy_write(phydev, LAN88XX_INT_MASK, temp);
+ }
+}
+
static struct phy_driver microchip_phy_driver[] = {
{
.phy_id = 0x0007c130,
@@ -339,6 +370,7 @@
.config_init = lan88xx_config_init,
.config_aneg = lan88xx_config_aneg,
+ .link_change_notify = lan88xx_link_change_notify,
.ack_interrupt = lan88xx_phy_ack_interrupt,
.config_intr = lan88xx_phy_config_intr,
--
Gitblit v1.6.2