From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/media/pci/saa7134/saa7134-input.c | 131 ++++++-------------------------------------
1 files changed, 18 insertions(+), 113 deletions(-)
diff --git a/kernel/drivers/media/pci/saa7134/saa7134-input.c b/kernel/drivers/media/pci/saa7134/saa7134-input.c
index 0e28c50..8610eb4 100644
--- a/kernel/drivers/media/pci/saa7134/saa7134-input.c
+++ b/kernel/drivers/media/pci/saa7134/saa7134-input.c
@@ -1,17 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
*
* handle saa7134 IR remotes via linux kernel input layer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include "saa7134.h"
@@ -299,43 +289,6 @@
return 1;
}
-static int get_key_hvr1110(struct IR_i2c *ir, enum rc_proto *protocol,
- u32 *scancode, u8 *toggle)
-{
- int rc;
- unsigned char buf[5];
-
- /* poll IR chip */
- rc = i2c_master_recv(ir->c, buf, 5);
- if (rc != 5) {
- ir_dbg(ir, "read error\n");
- if (rc < 0)
- return rc;
- return -EIO;
- }
-
- /* Check if some key were pressed */
- if (!(buf[0] & 0x80))
- return 0;
-
- /*
- * buf[3] & 0x80 is always high.
- * buf[3] & 0x40 is a parity bit. A repeat event is marked
- * by preserving it into two separate readings
- * buf[4] bits 0 and 1, and buf[1] and buf[2] are always
- * zero.
- *
- * Note that the keymap which the hvr1110 uses is RC5.
- *
- * FIXME: start bits could maybe be used...?
- */
- *protocol = RC_PROTO_RC5;
- *scancode = RC_SCANCODE_RC5(buf[3] & 0x1f, buf[4] >> 2);
- *toggle = !!(buf[3] & 0x40);
- return 1;
-}
-
-
static int get_key_beholdm6xx(struct IR_i2c *ir, enum rc_proto *protocol,
u32 *scancode, u8 *toggle)
{
@@ -485,17 +438,10 @@
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
-static int __saa7134_ir_start(void *priv)
+int saa7134_ir_open(struct rc_dev *rc)
{
- struct saa7134_dev *dev = priv;
- struct saa7134_card_ir *ir;
-
- if (!dev || !dev->remote)
- return -EINVAL;
-
- ir = dev->remote;
- if (ir->running)
- return 0;
+ struct saa7134_dev *dev = rc->priv;
+ struct saa7134_card_ir *ir = dev->remote;
/* Moved here from saa7134_input_init1() because the latter
* is not called on device resume */
@@ -544,55 +490,15 @@
return 0;
}
-static void __saa7134_ir_stop(void *priv)
+void saa7134_ir_close(struct rc_dev *rc)
{
- struct saa7134_dev *dev = priv;
- struct saa7134_card_ir *ir;
-
- if (!dev || !dev->remote)
- return;
-
- ir = dev->remote;
- if (!ir->running)
- return;
+ struct saa7134_dev *dev = rc->priv;
+ struct saa7134_card_ir *ir = dev->remote;
if (ir->polling)
del_timer_sync(&ir->timer);
ir->running = false;
-
- return;
-}
-
-int saa7134_ir_start(struct saa7134_dev *dev)
-{
- if (dev->remote->users)
- return __saa7134_ir_start(dev);
-
- return 0;
-}
-
-void saa7134_ir_stop(struct saa7134_dev *dev)
-{
- if (dev->remote->users)
- __saa7134_ir_stop(dev);
-}
-
-static int saa7134_ir_open(struct rc_dev *rc)
-{
- struct saa7134_dev *dev = rc->priv;
-
- dev->remote->users++;
- return __saa7134_ir_start(dev);
-}
-
-static void saa7134_ir_close(struct rc_dev *rc)
-{
- struct saa7134_dev *dev = rc->priv;
-
- dev->remote->users--;
- if (!dev->remote->users)
- __saa7134_ir_stop(dev);
}
int saa7134_input_init1(struct saa7134_dev *dev)
@@ -661,7 +567,7 @@
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
polling = 50; // ms
- /* GPIO stuff moved to __saa7134_ir_start() */
+ /* GPIO stuff moved to saa7134_ir_open() */
break;
case SAA7134_BOARD_AVERMEDIA_M135A:
ir_codes = RC_MAP_AVERMEDIA_M135A;
@@ -683,14 +589,14 @@
mask_keycode = 0x02F200;
mask_keydown = 0x000400;
polling = 50; // ms
- /* GPIO stuff moved to __saa7134_ir_start() */
+ /* GPIO stuff moved to saa7134_ir_open() */
break;
case SAA7134_BOARD_AVERMEDIA_A16D:
ir_codes = RC_MAP_AVERMEDIA_A16D;
mask_keycode = 0x02F200;
mask_keydown = 0x000400;
polling = 50; /* ms */
- /* GPIO stuff moved to __saa7134_ir_start() */
+ /* GPIO stuff moved to saa7134_ir_open() */
break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = RC_MAP_PIXELVIEW;
@@ -742,7 +648,7 @@
mask_keycode = 0x0003CC;
mask_keydown = 0x000010;
polling = 5; /* ms */
- /* GPIO stuff moved to __saa7134_ir_start() */
+ /* GPIO stuff moved to saa7134_ir_open() */
break;
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
@@ -880,8 +786,6 @@
ir->raw_decode = raw_decode;
/* init input device */
- snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
- saa7134_boards[dev->board].name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
@@ -893,7 +797,7 @@
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
}
- rc->device_name = ir->name;
+ rc->device_name = saa7134_boards[dev->board].name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_PCI;
rc->input_id.version = 1;
@@ -929,7 +833,6 @@
if (NULL == dev->remote)
return;
- saa7134_ir_stop(dev);
rc_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
@@ -953,7 +856,7 @@
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+ strscpy(info.type, "ir_video", I2C_NAME_SIZE);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_PCTV_110i:
@@ -1031,9 +934,11 @@
(1 == rc) ? "yes" : "no");
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
- dev->init_data.name = "HVR 1110";
- dev->init_data.get_key = get_key_hvr1110;
+ dev->init_data.name = saa7134_boards[dev->board].name;
dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
+ dev->init_data.type = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_RC6_6A_32;
+ dev->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
info.addr = 0x71;
break;
case SAA7134_BOARD_BEHOLD_607FM_MK3:
@@ -1077,7 +982,7 @@
if (dev->init_data.name)
info.platform_data = &dev->init_data;
- i2c_new_device(&dev->i2c_adap, &info);
+ i2c_new_client_device(&dev->i2c_adap, &info);
}
static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
--
Gitblit v1.6.2