From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/media/pci/bt8xx/bttv-input.c | 25 ++++++++-----------------
1 files changed, 8 insertions(+), 17 deletions(-)
diff --git a/kernel/drivers/media/pci/bt8xx/bttv-input.c b/kernel/drivers/media/pci/bt8xx/bttv-input.c
index 08266b2..41226f1 100644
--- a/kernel/drivers/media/pci/bt8xx/bttv-input.c
+++ b/kernel/drivers/media/pci/bt8xx/bttv-input.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
*
* Copyright (c) 2003 Gerd Knorr
* Copyright (c) 2003 Pavel Machek
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -93,7 +84,7 @@
data = ir_extract_bits(gpio, ir->mask_keycode);
/* Check if it is keyup */
- keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0;
+ keyup = (gpio & ir->mask_keyup) ? 1UL << 31 : 0;
if ((ir->last_gpio & 0x7f) != data) {
dprintk("gpio=0x%x code=%d | %s\n",
@@ -104,7 +95,7 @@
if (keyup)
rc_keyup(ir->dev);
} else {
- if ((ir->last_gpio & 1 << 31) == keyup)
+ if ((ir->last_gpio & 1UL << 31) == keyup)
return;
dprintk("(cnt) gpio=0x%x code=%d | %s\n",
@@ -370,7 +361,7 @@
/* Instantiate the I2C IR receiver device, if present */
void init_bttv_i2c_ir(struct bttv *btv)
{
- const unsigned short addr_list[] = {
+ static const unsigned short addr_list[] = {
0x1a, 0x18, 0x64, 0x30, 0x71,
I2C_CLIENT_END
};
@@ -382,7 +373,7 @@
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&btv->init_data, 0, sizeof(btv->init_data));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+ strscpy(info.type, "ir_video", I2C_NAME_SIZE);
switch (btv->c.type) {
case BTTV_BOARD_PV951:
@@ -395,7 +386,7 @@
if (btv->init_data.name) {
info.platform_data = &btv->init_data;
- i2c_dev = i2c_new_device(&btv->c.i2c_adap, &info);
+ i2c_dev = i2c_new_client_device(&btv->c.i2c_adap, &info);
} else {
/*
* The external IR receiver is at i2c address 0x34 (0x35 for
@@ -405,9 +396,9 @@
* internal.
* That's why we probe 0x1a (~0x34) first. CB
*/
- i2c_dev = i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL);
+ i2c_dev = i2c_new_scanned_device(&btv->c.i2c_adap, &info, addr_list, NULL);
}
- if (NULL == i2c_dev)
+ if (IS_ERR(i2c_dev))
return;
#if defined(CONFIG_MODULES) && defined(MODULE)
--
Gitblit v1.6.2