From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/media/i2c/smiapp/smiapp.h | 58 ++++++++++++++++++++++++++++++++++++++++++++--------------
1 files changed, 44 insertions(+), 14 deletions(-)
diff --git a/kernel/drivers/media/i2c/smiapp/smiapp.h b/kernel/drivers/media/i2c/smiapp/smiapp.h
index e6a5ab4..6f46993 100644
--- a/kernel/drivers/media/i2c/smiapp/smiapp.h
+++ b/kernel/drivers/media/i2c/smiapp/smiapp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* drivers/media/i2c/smiapp/smiapp.h
*
@@ -5,15 +6,6 @@
*
* Copyright (C) 2010--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
*/
#ifndef __SMIAPP_PRIV_H_
@@ -22,7 +14,6 @@
#include <linux/mutex.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
-#include <media/i2c/smiapp.h>
#include "smiapp-pll.h"
#include "smiapp-reg.h"
@@ -49,6 +40,49 @@
+ (clk) / 1000 - 1) / ((clk) / 1000))
#define SMIAPP_COLOUR_COMPONENTS 4
+
+#define SMIAPP_NAME "smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+ SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+ SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+ u8 mode;
+ u32 strobe_width_high_us;
+ u16 strobe_delay;
+ u16 stobe_start_point;
+ u8 trigger;
+};
+
+struct smiapp_hwconfig {
+ /*
+ * Change the cci address if i2c_addr_alt is set.
+ * Both default and alternate cci addr need to be present
+ */
+ unsigned short i2c_addr_dfl; /* Default i2c addr */
+ unsigned short i2c_addr_alt; /* Alternate i2c addr */
+
+ uint32_t ext_clk; /* sensor external clk */
+
+ unsigned int lanes; /* Number of CSI-2 lanes */
+ uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */
+ uint64_t *op_sys_clock;
+
+ enum smiapp_module_board_orient module_board_orient;
+
+ struct smiapp_flash_strobe_parms *strobe_setup;
+};
#include "smiapp-limits.h"
@@ -206,7 +240,6 @@
u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
u8 frame_skip;
- bool active; /* is the sensor powered on? */
u16 embedded_start; /* embedded data start line */
u16 embedded_end;
u16 image_start; /* image data start line */
@@ -215,9 +248,6 @@
bool streaming;
bool dev_init_done;
u8 compressed_min_bpp;
-
- u8 *nvm; /* nvm memory buffer */
- unsigned int nvm_size; /* bytes */
struct smiapp_module_info minfo;
--
Gitblit v1.6.2