From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/media/i2c/saa7115.c | 26 +++++++++++++++++---------
1 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/kernel/drivers/media/i2c/saa7115.c b/kernel/drivers/media/i2c/saa7115.c
index b07114b..88dc6ba 100644
--- a/kernel/drivers/media/i2c/saa7115.c
+++ b/kernel/drivers/media/i2c/saa7115.c
@@ -59,10 +59,16 @@
SAA7118,
};
+enum saa711x_pads {
+ SAA711X_PAD_IF_INPUT,
+ SAA711X_PAD_VID_OUT,
+ SAA711X_NUM_PADS
+};
+
struct saa711x_state {
struct v4l2_subdev sd;
#ifdef CONFIG_MEDIA_CONTROLLER
- struct media_pad pads[DEMOD_NUM_PADS];
+ struct media_pad pads[SAA711X_NUM_PADS];
#endif
struct v4l2_ctrl_handler hdl;
@@ -1760,12 +1766,12 @@
* exists. However, tests on a device labeled as:
* "GM7113C 1145" returned "10" on all 16 chip
* version (reg 0x00) reads. So, we need to also
- * accept at least verion 0. For now, let's just
+ * accept at least version 0. For now, let's just
* assume that a device that returns "0000" for
* the lower nibble is a gm7113c.
*/
- strlcpy(name, "gm7113c", CHIP_VER_SIZE);
+ strscpy(name, "gm7113c", CHIP_VER_SIZE);
if (!autodetect && strcmp(name, id->name))
return -EINVAL;
@@ -1779,7 +1785,7 @@
/* Check if it is a CJC7113 */
if (!memcmp(name, "1111111111111111", CHIP_VER_SIZE)) {
- strlcpy(name, "cjc7113", CHIP_VER_SIZE);
+ strscpy(name, "cjc7113", CHIP_VER_SIZE);
if (!autodetect && strcmp(name, id->name))
return -EINVAL;
@@ -1825,7 +1831,7 @@
if (ident < 0)
return ident;
- strlcpy(client->name, name, sizeof(client->name));
+ strscpy(client->name, name, sizeof(client->name));
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
if (state == NULL)
@@ -1834,13 +1840,15 @@
v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
#if defined(CONFIG_MEDIA_CONTROLLER)
- state->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
- state->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
- state->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ state->pads[SAA711X_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ state->pads[SAA711X_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
+ state->pads[SAA711X_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ state->pads[SAA711X_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
- ret = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, state->pads);
+ ret = media_entity_pads_init(&sd->entity, SAA711X_NUM_PADS,
+ state->pads);
if (ret < 0)
return ret;
#endif
--
Gitblit v1.6.2