From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/input/touchscreen/sx8654.c | 260 +++++++++++++++++++++++++++++++++++++++++++++------
1 files changed, 227 insertions(+), 33 deletions(-)
diff --git a/kernel/drivers/input/touchscreen/sx8654.c b/kernel/drivers/input/touchscreen/sx8654.c
index ed29db3..de85e57 100644
--- a/kernel/drivers/input/touchscreen/sx8654.c
+++ b/kernel/drivers/input/touchscreen/sx8654.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for Semtech SX8654 I2C touchscreen controller.
*
@@ -21,18 +22,18 @@
* Copyright (C) 2002 MontaVista Software
* Copyright (C) 2004 Texas Instruments
* Copyright (C) 2005 Dirk Behme
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
/* register addresses */
#define I2C_REG_TOUCH0 0x00
@@ -42,25 +43,28 @@
#define I2C_REG_IRQSRC 0x23
#define I2C_REG_SOFTRESET 0x3f
+#define I2C_REG_SX8650_STAT 0x05
+#define SX8650_STAT_CONVIRQ BIT(7)
+
/* commands */
#define CMD_READ_REGISTER 0x40
-#define CMD_MANUAL 0xc0
#define CMD_PENTRG 0xe0
/* value for I2C_REG_SOFTRESET */
#define SOFTRESET_VALUE 0xde
/* bits for I2C_REG_IRQSRC */
-#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08
-#define IRQ_PENRELEASE 0x04
+#define IRQ_PENTOUCH_TOUCHCONVDONE BIT(3)
+#define IRQ_PENRELEASE BIT(2)
/* bits for RegTouch1 */
#define CONDIRQ 0x20
+#define RPDNT_100K 0x00
#define FILT_7SA 0x03
/* bits for I2C_REG_CHANMASK */
-#define CONV_X 0x80
-#define CONV_Y 0x40
+#define CONV_X BIT(7)
+#define CONV_Y BIT(6)
/* coordinates rate: higher nibble of CTRL0 register */
#define RATE_MANUAL 0x00
@@ -69,12 +73,121 @@
/* power delay: lower nibble of CTRL0 register */
#define POWDLY_1_1MS 0x0b
+/* for sx8650, as we have no pen release IRQ there: timeout in ns following the
+ * last PENIRQ after which we assume the pen is lifted.
+ */
+#define SX8650_PENIRQ_TIMEOUT msecs_to_jiffies(10)
+
#define MAX_12BIT ((1 << 12) - 1)
+#define MAX_I2C_READ_LEN 10 /* see datasheet section 5.1.5 */
+
+/* channel definition */
+#define CH_X 0x00
+#define CH_Y 0x01
+
+struct sx865x_data {
+ u8 cmd_manual;
+ u8 chan_mask;
+ bool has_irq_penrelease;
+ bool has_reg_irqmask;
+ irq_handler_t irqh;
+};
struct sx8654 {
struct input_dev *input;
struct i2c_client *client;
+ struct gpio_desc *gpio_reset;
+
+ spinlock_t lock; /* for input reporting from irq/timer */
+ struct timer_list timer;
+
+ struct touchscreen_properties props;
+
+ const struct sx865x_data *data;
};
+
+static inline void sx865x_penrelease(struct sx8654 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_sync(input_dev);
+}
+
+static void sx865x_penrelease_timer_handler(struct timer_list *t)
+{
+ struct sx8654 *ts = from_timer(ts, t, timer);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ts->lock, flags);
+ sx865x_penrelease(ts);
+ spin_unlock_irqrestore(&ts->lock, flags);
+ dev_dbg(&ts->client->dev, "penrelease by timer\n");
+}
+
+static irqreturn_t sx8650_irq(int irq, void *handle)
+{
+ struct sx8654 *ts = handle;
+ struct device *dev = &ts->client->dev;
+ int len, i;
+ unsigned long flags;
+ u8 stat;
+ u16 x, y;
+ u16 ch;
+ u16 chdata;
+ __be16 data[MAX_I2C_READ_LEN / sizeof(__be16)];
+ u8 nchan = hweight32(ts->data->chan_mask);
+ u8 readlen = nchan * sizeof(*data);
+
+ stat = i2c_smbus_read_byte_data(ts->client, CMD_READ_REGISTER
+ | I2C_REG_SX8650_STAT);
+
+ if (!(stat & SX8650_STAT_CONVIRQ)) {
+ dev_dbg(dev, "%s ignore stat [0x%02x]", __func__, stat);
+ return IRQ_HANDLED;
+ }
+
+ len = i2c_master_recv(ts->client, (u8 *)data, readlen);
+ if (len != readlen) {
+ dev_dbg(dev, "ignore short recv (%d)\n", len);
+ return IRQ_HANDLED;
+ }
+
+ spin_lock_irqsave(&ts->lock, flags);
+
+ x = 0;
+ y = 0;
+ for (i = 0; i < nchan; i++) {
+ chdata = be16_to_cpu(data[i]);
+
+ if (unlikely(chdata == 0xFFFF)) {
+ dev_dbg(dev, "invalid qualified data @ %d\n", i);
+ continue;
+ } else if (unlikely(chdata & 0x8000)) {
+ dev_warn(dev, "hibit @ %d [0x%04x]\n", i, chdata);
+ continue;
+ }
+
+ ch = chdata >> 12;
+ if (ch == CH_X)
+ x = chdata & MAX_12BIT;
+ else if (ch == CH_Y)
+ y = chdata & MAX_12BIT;
+ else
+ dev_warn(dev, "unknown channel %d [0x%04x]\n", ch,
+ chdata);
+ }
+
+ touchscreen_report_pos(ts->input, &ts->props, x, y, false);
+ input_report_key(ts->input, BTN_TOUCH, 1);
+ input_sync(ts->input);
+ dev_dbg(dev, "point(%4d,%4d)\n", x, y);
+
+ mod_timer(&ts->timer, jiffies + SX8650_PENIRQ_TIMEOUT);
+ spin_unlock_irqrestore(&ts->lock, flags);
+
+ return IRQ_HANDLED;
+}
static irqreturn_t sx8654_irq(int irq, void *handle)
{
@@ -112,8 +225,8 @@
x = ((data[0] & 0xf) << 8) | (data[1]);
y = ((data[2] & 0xf) << 8) | (data[3]);
- input_report_abs(sx8654->input, ABS_X, x);
- input_report_abs(sx8654->input, ABS_Y, y);
+ touchscreen_report_pos(sx8654->input, &sx8654->props, x, y,
+ false);
input_report_key(sx8654->input, BTN_TOUCH, 1);
input_sync(sx8654->input);
@@ -122,6 +235,25 @@
out:
return IRQ_HANDLED;
+}
+
+static int sx8654_reset(struct sx8654 *ts)
+{
+ int err;
+
+ if (ts->gpio_reset) {
+ gpiod_set_value_cansleep(ts->gpio_reset, 1);
+ udelay(2); /* Tpulse > 1µs */
+ gpiod_set_value_cansleep(ts->gpio_reset, 0);
+ } else {
+ dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n");
+ err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET,
+ SOFTRESET_VALUE);
+ if (err)
+ return err;
+ }
+
+ return 0;
}
static int sx8654_open(struct input_dev *dev)
@@ -157,14 +289,17 @@
disable_irq(client->irq);
+ if (!sx8654->data->has_irq_penrelease)
+ del_timer_sync(&sx8654->timer);
+
/* enable manual mode mode */
- error = i2c_smbus_write_byte(client, CMD_MANUAL);
+ error = i2c_smbus_write_byte(client, sx8654->data->cmd_manual);
if (error) {
dev_err(&client->dev, "writing command CMD_MANUAL failed");
return;
}
- error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+ error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, RATE_MANUAL);
if (error) {
dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
return;
@@ -186,6 +321,31 @@
if (!sx8654)
return -ENOMEM;
+ sx8654->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(sx8654->gpio_reset)) {
+ error = PTR_ERR(sx8654->gpio_reset);
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev, "unable to get reset-gpio: %d\n",
+ error);
+ return error;
+ }
+ dev_dbg(&client->dev, "got GPIO reset pin\n");
+
+ sx8654->data = device_get_match_data(&client->dev);
+ if (!sx8654->data)
+ sx8654->data = (const struct sx865x_data *)id->driver_data;
+ if (!sx8654->data) {
+ dev_err(&client->dev, "invalid or missing device data\n");
+ return -EINVAL;
+ }
+
+ if (!sx8654->data->has_irq_penrelease) {
+ dev_dbg(&client->dev, "use timer for penrelease\n");
+ timer_setup(&sx8654->timer, sx865x_penrelease_timer_handler, 0);
+ spin_lock_init(&sx8654->lock);
+ }
+
input = devm_input_allocate_device(&client->dev);
if (!input)
return -ENOMEM;
@@ -201,43 +361,46 @@
input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+ touchscreen_parse_properties(input, false, &sx8654->props);
+
sx8654->client = client;
sx8654->input = input;
input_set_drvdata(sx8654->input, sx8654);
- error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
- SOFTRESET_VALUE);
+ error = sx8654_reset(sx8654);
if (error) {
- dev_err(&client->dev, "writing softreset value failed");
+ dev_err(&client->dev, "reset failed");
return error;
}
error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
- CONV_X | CONV_Y);
+ sx8654->data->chan_mask);
if (error) {
dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
return error;
}
- error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
- IRQ_PENTOUCH_TOUCHCONVDONE |
- IRQ_PENRELEASE);
- if (error) {
- dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
- return error;
+ if (sx8654->data->has_reg_irqmask) {
+ error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+ IRQ_PENTOUCH_TOUCHCONVDONE |
+ IRQ_PENRELEASE);
+ if (error) {
+ dev_err(&client->dev, "writing I2C_REG_IRQMASK failed");
+ return error;
+ }
}
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
- CONDIRQ | FILT_7SA);
+ CONDIRQ | RPDNT_100K | FILT_7SA);
if (error) {
dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
return error;
}
error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, sx8654_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ NULL, sx8654->data->irqh,
+ IRQF_ONESHOT,
client->name, sx8654);
if (error) {
dev_err(&client->dev,
@@ -256,17 +419,48 @@
return 0;
}
+static const struct sx865x_data sx8650_data = {
+ .cmd_manual = 0xb0,
+ .has_irq_penrelease = false,
+ .has_reg_irqmask = false,
+ .chan_mask = (CONV_X | CONV_Y),
+ .irqh = sx8650_irq,
+};
+
+static const struct sx865x_data sx8654_data = {
+ .cmd_manual = 0xc0,
+ .has_irq_penrelease = true,
+ .has_reg_irqmask = true,
+ .chan_mask = (CONV_X | CONV_Y),
+ .irqh = sx8654_irq,
+};
+
#ifdef CONFIG_OF
static const struct of_device_id sx8654_of_match[] = {
- { .compatible = "semtech,sx8654", },
- { },
+ {
+ .compatible = "semtech,sx8650",
+ .data = &sx8650_data,
+ }, {
+ .compatible = "semtech,sx8654",
+ .data = &sx8654_data,
+ }, {
+ .compatible = "semtech,sx8655",
+ .data = &sx8654_data,
+ }, {
+ .compatible = "semtech,sx8656",
+ .data = &sx8654_data,
+ },
+ { }
};
MODULE_DEVICE_TABLE(of, sx8654_of_match);
#endif
static const struct i2c_device_id sx8654_id_table[] = {
- { "semtech_sx8654", 0 },
- { },
+ { .name = "semtech_sx8650", .driver_data = (long)&sx8650_data },
+ { .name = "semtech_sx8654", .driver_data = (long)&sx8654_data },
+ { .name = "semtech_sx8655", .driver_data = (long)&sx8654_data },
+ { .name = "semtech_sx8656", .driver_data = (long)&sx8654_data },
+ { }
};
MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
--
Gitblit v1.6.2