From 9370bb92b2d16684ee45cf24e879c93c509162da Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 19 Dec 2024 01:47:39 +0000
Subject: [PATCH] add wifi6 8852be driver
---
kernel/drivers/input/touchscreen/bu21013_ts.c | 758 +++++++++++++++++++++++++--------------------------------
1 files changed, 330 insertions(+), 428 deletions(-)
diff --git a/kernel/drivers/input/touchscreen/bu21013_ts.c b/kernel/drivers/input/touchscreen/bu21013_ts.c
index 4fa5da8..2f1f0d7 100644
--- a/kernel/drivers/input/touchscreen/bu21013_ts.c
+++ b/kernel/drivers/input/touchscreen/bu21013_ts.c
@@ -1,24 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
- * License terms:GNU General Public License (GPL) version 2
*/
-#include <linux/kernel.h>
+#include <linux/bitops.h>
#include <linux/delay.h>
-#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
-#include <linux/workqueue.h>
#include <linux/input.h>
-#include <linux/input/bu21013.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
-#define PEN_DOWN_INTR 0
#define MAX_FINGERS 2
#define RESET_DELAY 30
#define PENUP_TIMEOUT (10)
@@ -137,69 +137,63 @@
#define DRIVER_TP "bu21013_tp"
/**
- * struct bu21013_ts_data - touch panel data structure
+ * struct bu21013_ts - touch panel data structure
* @client: pointer to the i2c client
- * @wait: variable to wait_queue_head_t structure
- * @touch_stopped: touch stop flag
- * @chip: pointer to the touch panel controller
* @in_dev: pointer to the input device structure
- * @intr_pin: interrupt pin value
+ * @props: the device coordinate transformation properties
* @regulator: pointer to the Regulator used for touch screen
+ * @cs_gpiod: chip select GPIO line
+ * @int_gpiod: touch interrupt GPIO line
+ * @touch_x_max: maximum X coordinate reported by the device
+ * @touch_y_max: maximum Y coordinate reported by the device
+ * @x_flip: indicates that the driver should invert X coordinate before
+ * reporting
+ * @y_flip: indicates that the driver should invert Y coordinate before
+ * reporting
+ * @touch_stopped: touch stop flag
*
* Touch panel device data structure
*/
-struct bu21013_ts_data {
+struct bu21013_ts {
struct i2c_client *client;
- wait_queue_head_t wait;
- const struct bu21013_platform_device *chip;
struct input_dev *in_dev;
+ struct touchscreen_properties props;
struct regulator *regulator;
- unsigned int irq;
- unsigned int intr_pin;
+ struct gpio_desc *cs_gpiod;
+ struct gpio_desc *int_gpiod;
+ u32 touch_x_max;
+ u32 touch_y_max;
+ bool x_flip;
+ bool y_flip;
bool touch_stopped;
};
-/**
- * bu21013_read_block_data(): read the touch co-ordinates
- * @data: bu21013_ts_data structure pointer
- * @buf: byte pointer
- *
- * Read the touch co-ordinates using i2c read block into buffer
- * and returns integer.
- */
-static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf)
+static int bu21013_read_block_data(struct bu21013_ts *ts, u8 *buf)
{
int ret, i;
for (i = 0; i < I2C_RETRY_COUNT; i++) {
- ret = i2c_smbus_read_i2c_block_data
- (data->client, BU21013_SENSORS_BTN_0_7_REG,
- LENGTH_OF_BUFFER, buf);
+ ret = i2c_smbus_read_i2c_block_data(ts->client,
+ BU21013_SENSORS_BTN_0_7_REG,
+ LENGTH_OF_BUFFER, buf);
if (ret == LENGTH_OF_BUFFER)
return 0;
}
+
return -EINVAL;
}
-/**
- * bu21013_do_touch_report(): Get the touch co-ordinates
- * @data: bu21013_ts_data structure pointer
- *
- * Get the touch co-ordinates from touch sensor registers and writes
- * into device structure and returns integer.
- */
-static int bu21013_do_touch_report(struct bu21013_ts_data *data)
+static int bu21013_do_touch_report(struct bu21013_ts *ts)
{
- u8 buf[LENGTH_OF_BUFFER];
- unsigned int pos_x[2], pos_y[2];
- bool has_x_sensors, has_y_sensors;
- int finger_down_count = 0;
- int i;
+ struct input_dev *input = ts->in_dev;
+ struct input_mt_pos pos[MAX_FINGERS];
+ int slots[MAX_FINGERS];
+ u8 buf[LENGTH_OF_BUFFER];
+ bool has_x_sensors, has_y_sensors;
+ int finger_down_count = 0;
+ int i;
- if (data == NULL)
- return -EINVAL;
-
- if (bu21013_read_block_data(data, buf) < 0)
+ if (bu21013_read_block_data(ts, buf) < 0)
return -EINVAL;
has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7);
@@ -209,501 +203,411 @@
return 0;
for (i = 0; i < MAX_FINGERS; i++) {
- const u8 *p = &buf[4 * i + 3];
- unsigned int x = p[0] << SHIFT_2 | (p[1] & MASK_BITS);
- unsigned int y = p[2] << SHIFT_2 | (p[3] & MASK_BITS);
- if (x == 0 || y == 0)
- continue;
- pos_x[finger_down_count] = x;
- pos_y[finger_down_count] = y;
- finger_down_count++;
+ const u8 *data = &buf[4 * i + 3];
+ unsigned int x, y;
+
+ x = data[0] << SHIFT_2 | (data[1] & MASK_BITS);
+ y = data[2] << SHIFT_2 | (data[3] & MASK_BITS);
+ if (x != 0 && y != 0)
+ touchscreen_set_mt_pos(&pos[finger_down_count++],
+ &ts->props, x, y);
}
- if (finger_down_count) {
- if (finger_down_count == 2 &&
- (abs(pos_x[0] - pos_x[1]) < DELTA_MIN ||
- abs(pos_y[0] - pos_y[1]) < DELTA_MIN)) {
- return 0;
- }
+ if (finger_down_count == 2 &&
+ (abs(pos[0].x - pos[1].x) < DELTA_MIN ||
+ abs(pos[0].y - pos[1].y) < DELTA_MIN)) {
+ return 0;
+ }
- for (i = 0; i < finger_down_count; i++) {
- if (data->chip->x_flip)
- pos_x[i] = data->chip->touch_x_max - pos_x[i];
- if (data->chip->y_flip)
- pos_y[i] = data->chip->touch_y_max - pos_y[i];
+ input_mt_assign_slots(input, slots, pos, finger_down_count, DELTA_MIN);
+ for (i = 0; i < finger_down_count; i++) {
+ input_mt_slot(input, slots[i]);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+ input_report_abs(input, ABS_MT_POSITION_X, pos[i].x);
+ input_report_abs(input, ABS_MT_POSITION_Y, pos[i].y);
+ }
- input_report_abs(data->in_dev,
- ABS_MT_POSITION_X, pos_x[i]);
- input_report_abs(data->in_dev,
- ABS_MT_POSITION_Y, pos_y[i]);
- input_mt_sync(data->in_dev);
- }
- } else
- input_mt_sync(data->in_dev);
-
- input_sync(data->in_dev);
+ input_mt_sync_frame(input);
+ input_sync(input);
return 0;
}
-/**
- * bu21013_gpio_irq() - gpio thread function for touch interrupt
- * @irq: irq value
- * @device_data: void pointer
- *
- * This gpio thread function for touch interrupt
- * and returns irqreturn_t.
- */
+
static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
{
- struct bu21013_ts_data *data = device_data;
- struct i2c_client *i2c = data->client;
- int retval;
+ struct bu21013_ts *ts = device_data;
+ int keep_polling;
+ int error;
do {
- retval = bu21013_do_touch_report(data);
- if (retval < 0) {
- dev_err(&i2c->dev, "bu21013_do_touch_report failed\n");
- return IRQ_NONE;
+ error = bu21013_do_touch_report(ts);
+ if (error) {
+ dev_err(&ts->client->dev, "%s failed\n", __func__);
+ break;
}
- data->intr_pin = gpio_get_value(data->chip->touch_pin);
- if (data->intr_pin == PEN_DOWN_INTR)
- wait_event_timeout(data->wait, data->touch_stopped,
- msecs_to_jiffies(2));
- } while (!data->intr_pin && !data->touch_stopped);
+ if (unlikely(ts->touch_stopped))
+ break;
+
+ keep_polling = ts->int_gpiod ?
+ gpiod_get_value(ts->int_gpiod) : false;
+ if (keep_polling)
+ usleep_range(2000, 2500);
+ } while (keep_polling);
return IRQ_HANDLED;
}
-/**
- * bu21013_init_chip() - power on sequence for the bu21013 controller
- * @data: device structure pointer
- *
- * This function is used to power on
- * the bu21013 controller and returns integer.
- */
-static int bu21013_init_chip(struct bu21013_ts_data *data)
+static int bu21013_init_chip(struct bu21013_ts *ts)
{
- int retval;
- struct i2c_client *i2c = data->client;
+ struct i2c_client *client = ts->client;
+ int error;
- retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG,
- BU21013_RESET_ENABLE);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_RESET reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_RESET_REG,
+ BU21013_RESET_ENABLE);
+ if (error) {
+ dev_err(&client->dev, "BU21013_RESET reg write failed\n");
+ return error;
}
msleep(RESET_DELAY);
- retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG,
- BU21013_SENSORS_EN_0_7);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_SENSOR_0_7_REG,
+ BU21013_SENSORS_EN_0_7);
+ if (error) {
+ dev_err(&client->dev, "BU21013_SENSOR_0_7 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG,
- BU21013_SENSORS_EN_8_15);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_SENSOR_8_15_REG,
+ BU21013_SENSORS_EN_8_15);
+ if (error) {
+ dev_err(&client->dev, "BU21013_SENSOR_8_15 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG,
- BU21013_SENSORS_EN_16_23);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_SENSOR_16_23_REG,
+ BU21013_SENSORS_EN_16_23);
+ if (error) {
+ dev_err(&client->dev, "BU21013_SENSOR_16_23 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG,
- (BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_POS_MODE1_REG,
+ BU21013_POS_MODE1_0 |
+ BU21013_POS_MODE1_1);
+ if (error) {
+ dev_err(&client->dev, "BU21013_POS_MODE1 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG,
- (BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 |
- BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW |
- BU21013_POS_MODE2_MULTI));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_POS_MODE2_REG,
+ BU21013_POS_MODE2_ZERO |
+ BU21013_POS_MODE2_AVG1 |
+ BU21013_POS_MODE2_AVG2 |
+ BU21013_POS_MODE2_EN_RAW |
+ BU21013_POS_MODE2_MULTI);
+ if (error) {
+ dev_err(&client->dev, "BU21013_POS_MODE2 reg write failed\n");
+ return error;
}
- if (data->chip->ext_clk)
- retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
- (BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB));
- else
- retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
- (BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_CLK_MODE_REG,
+ BU21013_CLK_MODE_DIV |
+ BU21013_CLK_MODE_CALIB);
+ if (error) {
+ dev_err(&client->dev, "BU21013_CLK_MODE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG,
- (BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_IDLE_REG,
+ BU21013_IDLET_0 |
+ BU21013_IDLE_INTERMIT_EN);
+ if (error) {
+ dev_err(&client->dev, "BU21013_IDLE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG,
- BU21013_INT_MODE_LEVEL);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_INT_MODE_REG,
+ BU21013_INT_MODE_LEVEL);
+ if (error) {
+ dev_err(&client->dev, "BU21013_INT_MODE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG,
- (BU21013_DELTA_0_6 |
- BU21013_FILTER_EN));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_FILTER_REG,
+ BU21013_DELTA_0_6 |
+ BU21013_FILTER_EN);
+ if (error) {
+ dev_err(&client->dev, "BU21013_FILTER reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG,
- BU21013_TH_ON_5);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_TH_ON_REG,
+ BU21013_TH_ON_5);
+ if (error) {
+ dev_err(&client->dev, "BU21013_TH_ON reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
- BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_TH_OFF_REG,
+ BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
+ if (error) {
+ dev_err(&client->dev, "BU21013_TH_OFF reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG,
- (BU21013_GAIN_0 | BU21013_GAIN_1));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_GAIN_REG,
+ BU21013_GAIN_0 | BU21013_GAIN_1);
+ if (error) {
+ dev_err(&client->dev, "BU21013_GAIN reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG,
- BU21013_OFFSET_MODE_DEFAULT);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_OFFSET_MODE_REG,
+ BU21013_OFFSET_MODE_DEFAULT);
+ if (error) {
+ dev_err(&client->dev, "BU21013_OFFSET_MODE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG,
- (BU21013_X_EDGE_0 | BU21013_X_EDGE_2 |
- BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_XY_EDGE_REG,
+ BU21013_X_EDGE_0 |
+ BU21013_X_EDGE_2 |
+ BU21013_Y_EDGE_1 |
+ BU21013_Y_EDGE_3);
+ if (error) {
+ dev_err(&client->dev, "BU21013_XY_EDGE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG,
- BU21013_DONE);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_DONE_REG,
+ BU21013_DONE);
+ if (error) {
+ dev_err(&client->dev, "BU21013_REG_DONE reg write failed\n");
+ return error;
}
return 0;
}
-/**
- * bu21013_free_irq() - frees IRQ registered for touchscreen
- * @bu21013_data: device structure pointer
- *
- * This function signals interrupt thread to stop processing and
- * frees interrupt.
- */
-static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
+static void bu21013_power_off(void *_ts)
{
- bu21013_data->touch_stopped = true;
- wake_up(&bu21013_data->wait);
- free_irq(bu21013_data->irq, bu21013_data);
+ struct bu21013_ts *ts = _ts;
+
+ regulator_disable(ts->regulator);
}
-/**
- * bu21013_cs_disable() - deconfigures the touch panel controller
- * @bu21013_data: device structure pointer
- *
- * This function is used to deconfigure the chip selection
- * for touch panel controller.
- */
-static void bu21013_cs_disable(struct bu21013_ts_data *bu21013_data)
+static void bu21013_disable_chip(void *_ts)
{
- int error;
+ struct bu21013_ts *ts = _ts;
- error = gpio_direction_output(bu21013_data->chip->cs_pin, 0);
- if (error < 0)
- dev_warn(&bu21013_data->client->dev,
- "%s: gpio direction failed, error: %d\n",
- __func__, error);
- else
- gpio_set_value(bu21013_data->chip->cs_pin, 0);
-
- gpio_free(bu21013_data->chip->cs_pin);
+ gpiod_set_value(ts->cs_gpiod, 0);
}
-#ifdef CONFIG_OF
-static const struct bu21013_platform_device *
-bu21013_parse_dt(struct device *dev)
-{
- struct device_node *np = dev->of_node;
- struct bu21013_platform_device *pdata;
-
- if (!np) {
- dev_err(dev, "no device tree or platform data\n");
- return ERR_PTR(-EINVAL);
- }
-
- pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
-
- pdata->y_flip = pdata->x_flip = false;
-
- pdata->x_flip = of_property_read_bool(np, "rohm,flip-x");
- pdata->y_flip = of_property_read_bool(np, "rohm,flip-y");
-
- of_property_read_u32(np, "rohm,touch-max-x", &pdata->touch_x_max);
- of_property_read_u32(np, "rohm,touch-max-y", &pdata->touch_y_max);
-
- pdata->touch_pin = of_get_named_gpio(np, "touch-gpio", 0);
- pdata->cs_pin = of_get_named_gpio(np, "reset-gpio", 0);
-
- pdata->ext_clk = false;
-
- return pdata;
-}
-#else
-static inline const struct bu21013_platform_device *
-bu21013_parse_dt(struct device *dev)
-{
- dev_err(dev, "no platform data available\n");
- return ERR_PTR(-EINVAL);
-}
-#endif
-
-/**
- * bu21013_probe() - initializes the i2c-client touchscreen driver
- * @client: i2c client structure pointer
- * @id: i2c device id pointer
- *
- * This function used to initializes the i2c-client touchscreen
- * driver and returns integer.
- */
static int bu21013_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct bu21013_platform_device *pdata =
- dev_get_platdata(&client->dev);
- struct bu21013_ts_data *bu21013_data;
+ struct bu21013_ts *ts;
struct input_dev *in_dev;
+ struct input_absinfo *info;
+ u32 max_x = 0, max_y = 0;
int error;
if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA)) {
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "i2c smbus byte data not supported\n");
return -EIO;
}
- if (!pdata) {
- pdata = bu21013_parse_dt(&client->dev);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
- }
-
- if (!gpio_is_valid(pdata->touch_pin)) {
- dev_err(&client->dev, "invalid touch_pin supplied\n");
+ if (!client->irq) {
+ dev_err(&client->dev, "No IRQ set up\n");
return -EINVAL;
}
- bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL);
- in_dev = input_allocate_device();
- if (!bu21013_data || !in_dev) {
+ ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = client;
+
+ ts->x_flip = device_property_read_bool(&client->dev, "rohm,flip-x");
+ ts->y_flip = device_property_read_bool(&client->dev, "rohm,flip-y");
+
+ in_dev = devm_input_allocate_device(&client->dev);
+ if (!in_dev) {
dev_err(&client->dev, "device memory alloc failed\n");
- error = -ENOMEM;
- goto err_free_mem;
+ return -ENOMEM;
}
-
- bu21013_data->in_dev = in_dev;
- bu21013_data->chip = pdata;
- bu21013_data->client = client;
- bu21013_data->irq = gpio_to_irq(pdata->touch_pin);
-
- bu21013_data->regulator = regulator_get(&client->dev, "avdd");
- if (IS_ERR(bu21013_data->regulator)) {
- dev_err(&client->dev, "regulator_get failed\n");
- error = PTR_ERR(bu21013_data->regulator);
- goto err_free_mem;
- }
-
- error = regulator_enable(bu21013_data->regulator);
- if (error < 0) {
- dev_err(&client->dev, "regulator enable failed\n");
- goto err_put_regulator;
- }
-
- bu21013_data->touch_stopped = false;
- init_waitqueue_head(&bu21013_data->wait);
-
- /* configure the gpio pins */
- error = gpio_request_one(pdata->cs_pin, GPIOF_OUT_INIT_HIGH,
- "touchp_reset");
- if (error < 0) {
- dev_err(&client->dev, "Unable to request gpio reset_pin\n");
- goto err_disable_regulator;
- }
-
- /* configure the touch panel controller */
- error = bu21013_init_chip(bu21013_data);
- if (error) {
- dev_err(&client->dev, "error in bu21013 config\n");
- goto err_cs_disable;
- }
+ ts->in_dev = in_dev;
+ input_set_drvdata(in_dev, ts);
/* register the device to input subsystem */
in_dev->name = DRIVER_TP;
in_dev->id.bustype = BUS_I2C;
- in_dev->dev.parent = &client->dev;
- __set_bit(EV_SYN, in_dev->evbit);
- __set_bit(EV_KEY, in_dev->evbit);
- __set_bit(EV_ABS, in_dev->evbit);
+ device_property_read_u32(&client->dev, "rohm,touch-max-x", &max_x);
+ device_property_read_u32(&client->dev, "rohm,touch-max-y", &max_y);
- input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0,
- pdata->touch_x_max, 0, 0);
- input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0,
- pdata->touch_y_max, 0, 0);
- input_set_drvdata(in_dev, bu21013_data);
+ input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+ input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
- error = request_threaded_irq(bu21013_data->irq, NULL, bu21013_gpio_irq,
- IRQF_TRIGGER_FALLING | IRQF_SHARED |
- IRQF_ONESHOT,
- DRIVER_TP, bu21013_data);
+ touchscreen_parse_properties(in_dev, true, &ts->props);
+
+ /* Adjust for the legacy "flip" properties, if present */
+ if (!ts->props.invert_x &&
+ device_property_read_bool(&client->dev, "rohm,flip-x")) {
+ info = &in_dev->absinfo[ABS_MT_POSITION_X];
+ info->maximum -= info->minimum;
+ info->minimum = 0;
+ }
+
+ if (!ts->props.invert_y &&
+ device_property_read_bool(&client->dev, "rohm,flip-y")) {
+ info = &in_dev->absinfo[ABS_MT_POSITION_Y];
+ info->maximum -= info->minimum;
+ info->minimum = 0;
+ }
+
+ error = input_mt_init_slots(in_dev, MAX_FINGERS,
+ INPUT_MT_DIRECT | INPUT_MT_TRACK |
+ INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&client->dev, "failed to initialize MT slots");
+ return error;
+ }
+
+ ts->regulator = devm_regulator_get(&client->dev, "avdd");
+ if (IS_ERR(ts->regulator)) {
+ dev_err(&client->dev, "regulator_get failed\n");
+ return PTR_ERR(ts->regulator);
+ }
+
+ error = regulator_enable(ts->regulator);
+ if (error) {
+ dev_err(&client->dev, "regulator enable failed\n");
+ return error;
+ }
+
+ error = devm_add_action_or_reset(&client->dev, bu21013_power_off, ts);
+ if (error) {
+ dev_err(&client->dev, "failed to install power off handler\n");
+ return error;
+ }
+
+ /* Named "CS" on the chip, DT binding is "reset" */
+ ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+ error = PTR_ERR_OR_ZERO(ts->cs_gpiod);
+ if (error) {
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev, "failed to get CS GPIO\n");
+ return error;
+ }
+ gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
+
+ error = devm_add_action_or_reset(&client->dev,
+ bu21013_disable_chip, ts);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to install chip disable handler\n");
+ return error;
+ }
+
+ /* Named "INT" on the chip, DT binding is "touch" */
+ ts->int_gpiod = devm_gpiod_get_optional(&client->dev,
+ "touch", GPIOD_IN);
+ error = PTR_ERR_OR_ZERO(ts->int_gpiod);
+ if (error) {
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev, "failed to get INT GPIO\n");
+ return error;
+ }
+
+ if (ts->int_gpiod)
+ gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
+
+ /* configure the touch panel controller */
+ error = bu21013_init_chip(ts);
+ if (error) {
+ dev_err(&client->dev, "error in bu21013 config\n");
+ return error;
+ }
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, bu21013_gpio_irq,
+ IRQF_ONESHOT, DRIVER_TP, ts);
if (error) {
dev_err(&client->dev, "request irq %d failed\n",
- bu21013_data->irq);
- goto err_cs_disable;
+ client->irq);
+ return error;
}
error = input_register_device(in_dev);
if (error) {
dev_err(&client->dev, "failed to register input device\n");
- goto err_free_irq;
+ return error;
}
- device_init_wakeup(&client->dev, pdata->wakeup);
- i2c_set_clientdata(client, bu21013_data);
+ i2c_set_clientdata(client, ts);
return 0;
-
-err_free_irq:
- bu21013_free_irq(bu21013_data);
-err_cs_disable:
- bu21013_cs_disable(bu21013_data);
-err_disable_regulator:
- regulator_disable(bu21013_data->regulator);
-err_put_regulator:
- regulator_put(bu21013_data->regulator);
-err_free_mem:
- input_free_device(in_dev);
- kfree(bu21013_data);
-
- return error;
}
-/**
- * bu21013_remove() - removes the i2c-client touchscreen driver
- * @client: i2c client structure pointer
- *
- * This function uses to remove the i2c-client
- * touchscreen driver and returns integer.
- */
+
static int bu21013_remove(struct i2c_client *client)
{
- struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client);
+ struct bu21013_ts *ts = i2c_get_clientdata(client);
- bu21013_free_irq(bu21013_data);
-
- bu21013_cs_disable(bu21013_data);
-
- input_unregister_device(bu21013_data->in_dev);
-
- regulator_disable(bu21013_data->regulator);
- regulator_put(bu21013_data->regulator);
-
- kfree(bu21013_data);
+ /* Make sure IRQ will exit quickly even if there is contact */
+ ts->touch_stopped = true;
+ /* The resources will be freed by devm */
return 0;
}
-#ifdef CONFIG_PM
-/**
- * bu21013_suspend() - suspend the touch screen controller
- * @dev: pointer to device structure
- *
- * This function is used to suspend the
- * touch panel controller and returns integer
- */
-static int bu21013_suspend(struct device *dev)
+static int __maybe_unused bu21013_suspend(struct device *dev)
{
- struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
- struct i2c_client *client = bu21013_data->client;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bu21013_ts *ts = i2c_get_clientdata(client);
- bu21013_data->touch_stopped = true;
- if (device_may_wakeup(&client->dev))
- enable_irq_wake(bu21013_data->irq);
- else
- disable_irq(bu21013_data->irq);
+ ts->touch_stopped = true;
+ mb();
+ disable_irq(client->irq);
- regulator_disable(bu21013_data->regulator);
+ if (!device_may_wakeup(&client->dev))
+ regulator_disable(ts->regulator);
return 0;
}
-/**
- * bu21013_resume() - resume the touch screen controller
- * @dev: pointer to device structure
- *
- * This function is used to resume the touch panel
- * controller and returns integer.
- */
-static int bu21013_resume(struct device *dev)
+static int __maybe_unused bu21013_resume(struct device *dev)
{
- struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
- struct i2c_client *client = bu21013_data->client;
- int retval;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bu21013_ts *ts = i2c_get_clientdata(client);
+ int error;
- retval = regulator_enable(bu21013_data->regulator);
- if (retval < 0) {
- dev_err(&client->dev, "bu21013 regulator enable failed\n");
- return retval;
+ if (!device_may_wakeup(&client->dev)) {
+ error = regulator_enable(ts->regulator);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to re-enable regulator when resuming\n");
+ return error;
+ }
+
+ error = bu21013_init_chip(ts);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to reinitialize chip when resuming\n");
+ return error;
+ }
}
- retval = bu21013_init_chip(bu21013_data);
- if (retval < 0) {
- dev_err(&client->dev, "bu21013 controller config failed\n");
- return retval;
- }
-
- bu21013_data->touch_stopped = false;
-
- if (device_may_wakeup(&client->dev))
- disable_irq_wake(bu21013_data->irq);
- else
- enable_irq(bu21013_data->irq);
+ ts->touch_stopped = false;
+ mb();
+ enable_irq(client->irq);
return 0;
}
-static const struct dev_pm_ops bu21013_dev_pm_ops = {
- .suspend = bu21013_suspend,
- .resume = bu21013_resume,
-};
-#endif
+static SIMPLE_DEV_PM_OPS(bu21013_dev_pm_ops, bu21013_suspend, bu21013_resume);
static const struct i2c_device_id bu21013_id[] = {
{ DRIVER_TP, 0 },
@@ -714,9 +618,7 @@
static struct i2c_driver bu21013_driver = {
.driver = {
.name = DRIVER_TP,
-#ifdef CONFIG_PM
.pm = &bu21013_dev_pm_ops,
-#endif
},
.probe = bu21013_probe,
.remove = bu21013_remove,
--
Gitblit v1.6.2