From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/include/drm/drm_atomic.h | 252 ++++++++++++++++++++++++++++++++++++++++----------
1 files changed, 201 insertions(+), 51 deletions(-)
diff --git a/kernel/include/drm/drm_atomic.h b/kernel/include/drm/drm_atomic.h
index 042ec8f..d07c851 100644
--- a/kernel/include/drm/drm_atomic.h
+++ b/kernel/include/drm/drm_atomic.h
@@ -29,12 +29,13 @@
#define DRM_ATOMIC_H_
#include <drm/drm_crtc.h>
+#include <drm/drm_util.h>
/**
* struct drm_crtc_commit - track modeset commits on a CRTC
*
* This structure is used to track pending modeset changes and atomic commit on
- * a per-CRTC basis. Since updating the list should never block this structure
+ * a per-CRTC basis. Since updating the list should never block, this structure
* is reference counted to allow waiters to safely wait on an event to complete,
* without holding any locks.
*
@@ -59,8 +60,8 @@
* wait for flip_done <----
* clean up atomic state
*
- * The important bit to know is that cleanup_done is the terminal event, but the
- * ordering between flip_done and hw_done is entirely up to the specific driver
+ * The important bit to know is that &cleanup_done is the terminal event, but the
+ * ordering between &flip_done and &hw_done is entirely up to the specific driver
* and modeset state change.
*
* For an implementation of how to use this look at
@@ -91,6 +92,9 @@
* commit is sent to userspace, or when an out-fence is singalled. Note
* that for most hardware, in most cases this happens after @hw_done is
* signalled.
+ *
+ * Completion of this stage is signalled implicitly by calling
+ * drm_crtc_send_vblank_event() on &drm_crtc_state.event.
*/
struct completion flip_done;
@@ -99,13 +103,16 @@
*
* Will be signalled when all hw register changes for this commit have
* been written out. Especially when disabling a pipe this can be much
- * later than than @flip_done, since that can signal already when the
+ * later than @flip_done, since that can signal already when the
* screen goes black, whereas to fully shut down a pipe more register
* I/O is required.
*
* Note that this does not need to include separately reference-counted
* resources like backing storage buffer pinning, or runtime pm
* management.
+ *
+ * Drivers should call drm_atomic_helper_commit_hw_done() to signal
+ * completion of this stage.
*/
struct completion hw_done;
@@ -117,6 +124,9 @@
* a vblank wait completed it might be a bit later. This completion is
* useful to throttle updates and avoid hardware updates getting ahead
* of the buffer cleanup too much.
+ *
+ * Drivers should call drm_atomic_helper_commit_cleanup_done() to signal
+ * completion of this stage.
*/
struct completion cleanup_done;
@@ -138,9 +148,9 @@
/**
* @abort_completion:
*
- * A flag that's set after drm_atomic_helper_setup_commit takes a second
- * reference for the completion of $drm_crtc_state.event. It's used by
- * the free code to remove the second reference if commit fails.
+ * A flag that's set after drm_atomic_helper_setup_commit() takes a
+ * second reference for the completion of $drm_crtc_state.event. It's
+ * used by the free code to remove the second reference if commit fails.
*/
bool abort_completion;
};
@@ -191,7 +201,7 @@
* private objects. The structure itself is used as a vtable to identify the
* associated private object type. Each private object type that needs to be
* added to the atomic states is expected to have an implementation of these
- * hooks and pass a pointer to it's drm_private_state_funcs struct to
+ * hooks and pass a pointer to its drm_private_state_funcs struct to
* drm_atomic_get_private_obj_state().
*/
struct drm_private_state_funcs {
@@ -227,8 +237,30 @@
* Currently only tracks the state update functions and the opaque driver
* private state itself, but in the future might also track which
* &drm_modeset_lock is required to duplicate and update this object's state.
+ *
+ * All private objects must be initialized before the DRM device they are
+ * attached to is registered to the DRM subsystem (call to drm_dev_register())
+ * and should stay around until this DRM device is unregistered (call to
+ * drm_dev_unregister()). In other words, private objects lifetime is tied
+ * to the DRM device lifetime. This implies that:
+ *
+ * 1/ all calls to drm_atomic_private_obj_init() must be done before calling
+ * drm_dev_register()
+ * 2/ all calls to drm_atomic_private_obj_fini() must be done after calling
+ * drm_dev_unregister()
*/
struct drm_private_obj {
+ /**
+ * @head: List entry used to attach a private object to a &drm_device
+ * (queued to &drm_mode_config.privobj_list).
+ */
+ struct list_head head;
+
+ /**
+ * @lock: Modeset lock to protect the state object.
+ */
+ struct drm_modeset_lock lock;
+
/**
* @state: Current atomic state for this driver private object.
*/
@@ -242,6 +274,18 @@
*/
const struct drm_private_state_funcs *funcs;
};
+
+/**
+ * drm_for_each_privobj() - private object iterator
+ *
+ * @privobj: pointer to the current private object. Updated after each
+ * iteration
+ * @dev: the DRM device we want get private objects from
+ *
+ * Allows one to iterate over all private objects attached to @dev
+ */
+#define drm_for_each_privobj(privobj, dev) \
+ list_for_each_entry(privobj, &(dev)->mode_config.privobj_list, head)
/**
* struct drm_private_state - base struct for driver private object state
@@ -264,7 +308,6 @@
* struct drm_atomic_state - the global state object for atomic updates
* @ref: count of all references to this state (will not be freed until zero)
* @dev: parent DRM device
- * @allow_modeset: allow full modeset
* @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
* @async_update: hint for asynchronous plane update
* @planes: pointer to array of structures with per-plane data
@@ -283,9 +326,27 @@
struct kref ref;
struct drm_device *dev;
+
+ /**
+ * @allow_modeset:
+ *
+ * Allow full modeset. This is used by the ATOMIC IOCTL handler to
+ * implement the DRM_MODE_ATOMIC_ALLOW_MODESET flag. Drivers should
+ * never consult this flag, instead looking at the output of
+ * drm_atomic_crtc_needs_modeset().
+ */
bool allow_modeset : 1;
bool legacy_cursor_update : 1;
bool async_update : 1;
+ /**
+ * @duplicated:
+ *
+ * Indicates whether or not this atomic state was duplicated using
+ * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers
+ * should use this to fixup normal inconsistencies in duplicated
+ * states.
+ */
+ bool duplicated : 1;
struct __drm_planes_state *planes;
struct __drm_crtcs_state *crtcs;
int num_connector;
@@ -302,7 +363,7 @@
* When a connector or plane is not bound to any CRTC, it's still important
* to preserve linearity to prevent the atomic states from being freed to early.
*
- * This commit (if set) is not bound to any crtc, but will be completed when
+ * This commit (if set) is not bound to any CRTC, but will be completed when
* drm_atomic_helper_commit_hw_done() is called.
*/
struct drm_crtc_commit *fake_commit;
@@ -384,9 +445,6 @@
struct drm_crtc_state * __must_check
drm_atomic_get_crtc_state(struct drm_atomic_state *state,
struct drm_crtc *crtc);
-int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
- struct drm_crtc_state *state, struct drm_property *property,
- uint64_t val);
struct drm_plane_state * __must_check
drm_atomic_get_plane_state(struct drm_atomic_state *state,
struct drm_plane *plane);
@@ -394,7 +452,8 @@
drm_atomic_get_connector_state(struct drm_atomic_state *state,
struct drm_connector *connector);
-void drm_atomic_private_obj_init(struct drm_private_obj *obj,
+void drm_atomic_private_obj_init(struct drm_device *dev,
+ struct drm_private_obj *obj,
struct drm_private_state *state,
const struct drm_private_state_funcs *funcs);
void drm_atomic_private_obj_fini(struct drm_private_obj *obj);
@@ -402,14 +461,27 @@
struct drm_private_state * __must_check
drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
struct drm_private_obj *obj);
+struct drm_private_state *
+drm_atomic_get_old_private_obj_state(struct drm_atomic_state *state,
+ struct drm_private_obj *obj);
+struct drm_private_state *
+drm_atomic_get_new_private_obj_state(struct drm_atomic_state *state,
+ struct drm_private_obj *obj);
+
+struct drm_connector *
+drm_atomic_get_old_connector_for_encoder(struct drm_atomic_state *state,
+ struct drm_encoder *encoder);
+struct drm_connector *
+drm_atomic_get_new_connector_for_encoder(struct drm_atomic_state *state,
+ struct drm_encoder *encoder);
/**
- * drm_atomic_get_existing_crtc_state - get crtc state, if it exists
+ * drm_atomic_get_existing_crtc_state - get CRTC state, if it exists
* @state: global atomic state object
- * @crtc: crtc to grab
+ * @crtc: CRTC to grab
*
- * This function returns the crtc state for the given crtc, or NULL
- * if the crtc is not part of the global atomic state.
+ * This function returns the CRTC state for the given CRTC, or NULL
+ * if the CRTC is not part of the global atomic state.
*
* This function is deprecated, @drm_atomic_get_old_crtc_state or
* @drm_atomic_get_new_crtc_state should be used instead.
@@ -422,12 +494,12 @@
}
/**
- * drm_atomic_get_old_crtc_state - get old crtc state, if it exists
+ * drm_atomic_get_old_crtc_state - get old CRTC state, if it exists
* @state: global atomic state object
- * @crtc: crtc to grab
+ * @crtc: CRTC to grab
*
- * This function returns the old crtc state for the given crtc, or
- * NULL if the crtc is not part of the global atomic state.
+ * This function returns the old CRTC state for the given CRTC, or
+ * NULL if the CRTC is not part of the global atomic state.
*/
static inline struct drm_crtc_state *
drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
@@ -436,12 +508,12 @@
return state->crtcs[drm_crtc_index(crtc)].old_state;
}
/**
- * drm_atomic_get_new_crtc_state - get new crtc state, if it exists
+ * drm_atomic_get_new_crtc_state - get new CRTC state, if it exists
* @state: global atomic state object
- * @crtc: crtc to grab
+ * @crtc: CRTC to grab
*
- * This function returns the new crtc state for the given crtc, or
- * NULL if the crtc is not part of the global atomic state.
+ * This function returns the new CRTC state for the given CRTC, or
+ * NULL if the CRTC is not part of the global atomic state.
*/
static inline struct drm_crtc_state *
drm_atomic_get_new_crtc_state(struct drm_atomic_state *state,
@@ -598,24 +670,8 @@
}
int __must_check
-drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state,
- const struct drm_display_mode *mode);
-int __must_check
-drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,
- struct drm_property_blob *blob);
-int __must_check
-drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state,
- struct drm_crtc *crtc);
-void drm_atomic_set_fb_for_plane(struct drm_plane_state *plane_state,
- struct drm_framebuffer *fb);
-void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
- struct dma_fence *fence);
-int __must_check
-drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
- struct drm_crtc *crtc);
-int drm_atomic_set_writeback_fb_for_connector(
- struct drm_connector_state *conn_state,
- struct drm_framebuffer *fb);
+drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
+ struct drm_encoder *encoder);
int __must_check
drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
struct drm_crtc *crtc);
@@ -649,6 +705,7 @@
(__i)++) \
for_each_if ((__state)->connectors[__i].ptr && \
((connector) = (__state)->connectors[__i].ptr, \
+ (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
(old_connector_state) = (__state)->connectors[__i].old_state, \
(new_connector_state) = (__state)->connectors[__i].new_state, 1))
@@ -670,6 +727,7 @@
(__i)++) \
for_each_if ((__state)->connectors[__i].ptr && \
((connector) = (__state)->connectors[__i].ptr, \
+ (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
(old_connector_state) = (__state)->connectors[__i].old_state, 1))
/**
@@ -690,7 +748,9 @@
(__i)++) \
for_each_if ((__state)->connectors[__i].ptr && \
((connector) = (__state)->connectors[__i].ptr, \
- (new_connector_state) = (__state)->connectors[__i].new_state, 1))
+ (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
+ (new_connector_state) = (__state)->connectors[__i].new_state, \
+ (void)(new_connector_state) /* Only to avoid unused-but-set-variable warning */, 1))
/**
* for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -710,7 +770,9 @@
(__i)++) \
for_each_if ((__state)->crtcs[__i].ptr && \
((crtc) = (__state)->crtcs[__i].ptr, \
+ (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
(old_crtc_state) = (__state)->crtcs[__i].old_state, \
+ (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \
(new_crtc_state) = (__state)->crtcs[__i].new_state, 1))
/**
@@ -749,7 +811,9 @@
(__i)++) \
for_each_if ((__state)->crtcs[__i].ptr && \
((crtc) = (__state)->crtcs[__i].ptr, \
- (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))
+ (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
+ (new_crtc_state) = (__state)->crtcs[__i].new_state, \
+ (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
/**
* for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
@@ -769,6 +833,7 @@
(__i)++) \
for_each_if ((__state)->planes[__i].ptr && \
((plane) = (__state)->planes[__i].ptr, \
+ (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
(old_plane_state) = (__state)->planes[__i].old_state,\
(new_plane_state) = (__state)->planes[__i].new_state, 1))
@@ -829,7 +894,9 @@
(__i)++) \
for_each_if ((__state)->planes[__i].ptr && \
((plane) = (__state)->planes[__i].ptr, \
- (new_plane_state) = (__state)->planes[__i].new_state, 1))
+ (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
+ (new_plane_state) = (__state)->planes[__i].new_state, \
+ (void)(new_plane_state) /* Only to avoid unused-but-set-variable warning */, 1))
/**
* for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
@@ -913,9 +980,92 @@
state->connectors_changed;
}
-int drm_atomic_set_property(struct drm_atomic_state *state,
- struct drm_mode_object *obj,
- struct drm_property *prop,
- uint64_t prop_value);
+/**
+ * drm_atomic_crtc_effectively_active - compute whether CRTC is actually active
+ * @state: &drm_crtc_state for the CRTC
+ *
+ * When in self refresh mode, the crtc_state->active value will be false, since
+ * the CRTC is off. However in some cases we're interested in whether the CRTC
+ * is active, or effectively active (ie: it's connected to an active display).
+ * In these cases, use this function instead of just checking active.
+ */
+static inline bool
+drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state)
+{
+ return state->active || state->self_refresh_active;
+}
+
+/**
+ * struct drm_bus_cfg - bus configuration
+ *
+ * This structure stores the configuration of a physical bus between two
+ * components in an output pipeline, usually between two bridges, an encoder
+ * and a bridge, or a bridge and a connector.
+ *
+ * The bus configuration is stored in &drm_bridge_state separately for the
+ * input and output buses, as seen from the point of view of each bridge. The
+ * bus configuration of a bridge output is usually identical to the
+ * configuration of the next bridge's input, but may differ if the signals are
+ * modified between the two bridges, for instance by an inverter on the board.
+ * The input and output configurations of a bridge may differ if the bridge
+ * modifies the signals internally, for instance by performing format
+ * conversion, or modifying signals polarities.
+ */
+struct drm_bus_cfg {
+ /**
+ * @format: format used on this bus (one of the MEDIA_BUS_FMT_* format)
+ *
+ * This field should not be directly modified by drivers
+ * (drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus
+ * format negotiation).
+ */
+ u32 format;
+
+ /**
+ * @flags: DRM_BUS_* flags used on this bus
+ */
+ u32 flags;
+};
+
+/**
+ * struct drm_bridge_state - Atomic bridge state object
+ */
+struct drm_bridge_state {
+ /**
+ * @base: inherit from &drm_private_state
+ */
+ struct drm_private_state base;
+
+ /**
+ * @bridge: the bridge this state refers to
+ */
+ struct drm_bridge *bridge;
+
+ /**
+ * @input_bus_cfg: input bus configuration
+ */
+ struct drm_bus_cfg input_bus_cfg;
+
+ /**
+ * @output_bus_cfg: input bus configuration
+ */
+ struct drm_bus_cfg output_bus_cfg;
+};
+
+static inline struct drm_bridge_state *
+drm_priv_to_bridge_state(struct drm_private_state *priv)
+{
+ return container_of(priv, struct drm_bridge_state, base);
+}
+
+struct drm_bridge_state *
+drm_atomic_get_bridge_state(struct drm_atomic_state *state,
+ struct drm_bridge *bridge);
+struct drm_bridge_state *
+drm_atomic_get_old_bridge_state(struct drm_atomic_state *state,
+ struct drm_bridge *bridge);
+struct drm_bridge_state *
+drm_atomic_get_new_bridge_state(struct drm_atomic_state *state,
+ struct drm_bridge *bridge);
#endif /* DRM_ATOMIC_H_ */
--
Gitblit v1.6.2