From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/drivers/net/ethernet/mellanox/mlxsw/reg.h | 2519 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 2,463 insertions(+), 56 deletions(-)
diff --git a/kernel/drivers/net/ethernet/mellanox/mlxsw/reg.h b/kernel/drivers/net/ethernet/mellanox/mlxsw/reg.h
index c989587..c670bf3 100644
--- a/kernel/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/kernel/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -295,6 +295,7 @@
MLXSW_REG_SFD_REC_TYPE_UNICAST = 0x0,
MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG = 0x1,
MLXSW_REG_SFD_REC_TYPE_MULTICAST = 0x2,
+ MLXSW_REG_SFD_REC_TYPE_UNICAST_TUNNEL = 0xC,
};
/* reg_sfd_rec_type
@@ -525,6 +526,61 @@
mlxsw_reg_sfd_mc_mid_set(payload, rec_index, mid);
}
+/* reg_sfd_uc_tunnel_uip_msb
+ * When protocol is IPv4, the most significant byte of the underlay IPv4
+ * destination IP.
+ * When protocol is IPv6, reserved.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, sfd, uc_tunnel_uip_msb, MLXSW_REG_SFD_BASE_LEN, 24,
+ 8, MLXSW_REG_SFD_REC_LEN, 0x08, false);
+
+/* reg_sfd_uc_tunnel_fid
+ * Filtering ID.
+ * Access: Index
+ */
+MLXSW_ITEM32_INDEXED(reg, sfd, uc_tunnel_fid, MLXSW_REG_SFD_BASE_LEN, 0, 16,
+ MLXSW_REG_SFD_REC_LEN, 0x08, false);
+
+enum mlxsw_reg_sfd_uc_tunnel_protocol {
+ MLXSW_REG_SFD_UC_TUNNEL_PROTOCOL_IPV4,
+ MLXSW_REG_SFD_UC_TUNNEL_PROTOCOL_IPV6,
+};
+
+/* reg_sfd_uc_tunnel_protocol
+ * IP protocol.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, sfd, uc_tunnel_protocol, MLXSW_REG_SFD_BASE_LEN, 27,
+ 1, MLXSW_REG_SFD_REC_LEN, 0x0C, false);
+
+/* reg_sfd_uc_tunnel_uip_lsb
+ * When protocol is IPv4, the least significant bytes of the underlay
+ * IPv4 destination IP.
+ * When protocol is IPv6, pointer to the underlay IPv6 destination IP
+ * which is configured by RIPS.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, sfd, uc_tunnel_uip_lsb, MLXSW_REG_SFD_BASE_LEN, 0,
+ 24, MLXSW_REG_SFD_REC_LEN, 0x0C, false);
+
+static inline void
+mlxsw_reg_sfd_uc_tunnel_pack(char *payload, int rec_index,
+ enum mlxsw_reg_sfd_rec_policy policy,
+ const char *mac, u16 fid,
+ enum mlxsw_reg_sfd_rec_action action, u32 uip,
+ enum mlxsw_reg_sfd_uc_tunnel_protocol proto)
+{
+ mlxsw_reg_sfd_rec_pack(payload, rec_index,
+ MLXSW_REG_SFD_REC_TYPE_UNICAST_TUNNEL, mac,
+ action);
+ mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy);
+ mlxsw_reg_sfd_uc_tunnel_uip_msb_set(payload, rec_index, uip >> 24);
+ mlxsw_reg_sfd_uc_tunnel_uip_lsb_set(payload, rec_index, uip);
+ mlxsw_reg_sfd_uc_tunnel_fid_set(payload, rec_index, fid);
+ mlxsw_reg_sfd_uc_tunnel_protocol_set(payload, rec_index, proto);
+}
+
/* SFN - Switch FDB Notification Register
* -------------------------------------------
* The switch provides notifications on newly learned FDB entries and
@@ -565,7 +621,7 @@
{
MLXSW_REG_ZERO(sfn, payload);
mlxsw_reg_sfn_swid_set(payload, 0);
- mlxsw_reg_sfn_end_set(payload, 1);
+ mlxsw_reg_sfn_end_set(payload, 0);
mlxsw_reg_sfn_num_rec_set(payload, MLXSW_REG_SFN_REC_MAX_COUNT);
}
@@ -585,6 +641,10 @@
MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC = 0x7,
/* Aged-out MAC address on a LAG port. */
MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC_LAG = 0x8,
+ /* Learned unicast tunnel record. */
+ MLXSW_REG_SFN_REC_TYPE_LEARNED_UNICAST_TUNNEL = 0xD,
+ /* Aged-out unicast tunnel record. */
+ MLXSW_REG_SFN_REC_TYPE_AGED_OUT_UNICAST_TUNNEL = 0xE,
};
/* reg_sfn_rec_type
@@ -646,6 +706,66 @@
mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac);
*p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index);
*p_lag_id = mlxsw_reg_sfn_mac_lag_lag_id_get(payload, rec_index);
+}
+
+/* reg_sfn_uc_tunnel_uip_msb
+ * When protocol is IPv4, the most significant byte of the underlay IPv4
+ * address of the remote VTEP.
+ * When protocol is IPv6, reserved.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_uip_msb, MLXSW_REG_SFN_BASE_LEN, 24,
+ 8, MLXSW_REG_SFN_REC_LEN, 0x08, false);
+
+enum mlxsw_reg_sfn_uc_tunnel_protocol {
+ MLXSW_REG_SFN_UC_TUNNEL_PROTOCOL_IPV4,
+ MLXSW_REG_SFN_UC_TUNNEL_PROTOCOL_IPV6,
+};
+
+/* reg_sfn_uc_tunnel_protocol
+ * IP protocol.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_protocol, MLXSW_REG_SFN_BASE_LEN, 27,
+ 1, MLXSW_REG_SFN_REC_LEN, 0x0C, false);
+
+/* reg_sfn_uc_tunnel_uip_lsb
+ * When protocol is IPv4, the least significant bytes of the underlay
+ * IPv4 address of the remote VTEP.
+ * When protocol is IPv6, ipv6_id to be queried from TNIPSD.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_uip_lsb, MLXSW_REG_SFN_BASE_LEN, 0,
+ 24, MLXSW_REG_SFN_REC_LEN, 0x0C, false);
+
+enum mlxsw_reg_sfn_tunnel_port {
+ MLXSW_REG_SFN_TUNNEL_PORT_NVE,
+ MLXSW_REG_SFN_TUNNEL_PORT_VPLS,
+ MLXSW_REG_SFN_TUNNEL_FLEX_TUNNEL0,
+ MLXSW_REG_SFN_TUNNEL_FLEX_TUNNEL1,
+};
+
+/* reg_sfn_uc_tunnel_port
+ * Tunnel port.
+ * Reserved on Spectrum.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, sfn, tunnel_port, MLXSW_REG_SFN_BASE_LEN, 0, 4,
+ MLXSW_REG_SFN_REC_LEN, 0x10, false);
+
+static inline void
+mlxsw_reg_sfn_uc_tunnel_unpack(char *payload, int rec_index, char *mac,
+ u16 *p_fid, u32 *p_uip,
+ enum mlxsw_reg_sfn_uc_tunnel_protocol *p_proto)
+{
+ u32 uip_msb, uip_lsb;
+
+ mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac);
+ *p_fid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index);
+ uip_msb = mlxsw_reg_sfn_uc_tunnel_uip_msb_get(payload, rec_index);
+ uip_lsb = mlxsw_reg_sfn_uc_tunnel_uip_lsb_get(payload, rec_index);
+ *p_uip = uip_msb << 24 | uip_lsb;
+ *p_proto = mlxsw_reg_sfn_uc_tunnel_protocol_get(payload, rec_index);
}
/* SPMS - Switch Port MSTP/RSTP State Register
@@ -1069,6 +1189,8 @@
MLXSW_REG_SFDF_FLUSH_PER_PORT_AND_FID,
MLXSW_REG_SFDF_FLUSH_PER_LAG,
MLXSW_REG_SFDF_FLUSH_PER_LAG_AND_FID,
+ MLXSW_REG_SFDF_FLUSH_PER_NVE,
+ MLXSW_REG_SFDF_FLUSH_PER_NVE_AND_FID,
};
/* reg_sfdf_flush_type
@@ -1079,6 +1201,10 @@
* 3 - All FID dynamic entries pointing to port are flushed.
* 4 - All dynamic entries pointing to LAG are flushed.
* 5 - All FID dynamic entries pointing to LAG are flushed.
+ * 6 - All entries of type "Unicast Tunnel" or "Multicast Tunnel" are
+ * flushed.
+ * 7 - All entries of type "Unicast Tunnel" or "Multicast Tunnel" are
+ * flushed, per FID.
* Access: RW
*/
MLXSW_ITEM32(reg, sfdf, flush_type, 0x04, 28, 4);
@@ -1315,12 +1441,19 @@
*/
MLXSW_ITEM32(reg, slcr, lag_hash, 0x04, 0, 20);
-static inline void mlxsw_reg_slcr_pack(char *payload, u16 lag_hash)
+/* reg_slcr_seed
+ * LAG seed value. The seed is the same for all ports.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, slcr, seed, 0x08, 0, 32);
+
+static inline void mlxsw_reg_slcr_pack(char *payload, u16 lag_hash, u32 seed)
{
MLXSW_REG_ZERO(slcr, payload);
mlxsw_reg_slcr_pp_set(payload, MLXSW_REG_SLCR_PP_GLOBAL);
mlxsw_reg_slcr_type_set(payload, MLXSW_REG_SLCR_TYPE_CRC);
mlxsw_reg_slcr_lag_hash_set(payload, lag_hash);
+ mlxsw_reg_slcr_seed_set(payload, seed);
}
/* SLCOR - Switch LAG Collector Register
@@ -2066,6 +2199,14 @@
*/
MLXSW_ITEM32(reg, pagt, acl_group_id, 0x08, 0, 16);
+/* reg_pagt_multi
+ * Multi-ACL
+ * 0 - This ACL is the last ACL in the multi-ACL
+ * 1 - This ACL is part of a multi-ACL
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pagt, multi, 0x30, 31, 1, 0x04, 0x00, false);
+
/* reg_pagt_acl_id
* ACL identifier
* Access: RW
@@ -2079,12 +2220,13 @@
}
static inline void mlxsw_reg_pagt_acl_id_pack(char *payload, int index,
- u16 acl_id)
+ u16 acl_id, bool multi)
{
u8 size = mlxsw_reg_pagt_size_get(payload);
if (index >= size)
mlxsw_reg_pagt_size_set(payload, index + 1);
+ mlxsw_reg_pagt_multi_set(payload, index, multi);
mlxsw_reg_pagt_acl_id_set(payload, index, acl_id);
}
@@ -2362,6 +2504,43 @@
*p_a = mlxsw_reg_pefa_a_get(payload);
}
+/* PEMRBT - Policy-Engine Multicast Router Binding Table Register
+ * --------------------------------------------------------------
+ * This register is used for binding Multicast router to an ACL group
+ * that serves the MC router.
+ * This register is not supported by SwitchX/-2 and Spectrum.
+ */
+#define MLXSW_REG_PEMRBT_ID 0x3014
+#define MLXSW_REG_PEMRBT_LEN 0x14
+
+MLXSW_REG_DEFINE(pemrbt, MLXSW_REG_PEMRBT_ID, MLXSW_REG_PEMRBT_LEN);
+
+enum mlxsw_reg_pemrbt_protocol {
+ MLXSW_REG_PEMRBT_PROTO_IPV4,
+ MLXSW_REG_PEMRBT_PROTO_IPV6,
+};
+
+/* reg_pemrbt_protocol
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pemrbt, protocol, 0x00, 0, 1);
+
+/* reg_pemrbt_group_id
+ * ACL group identifier.
+ * Range 0..cap_max_acl_groups-1
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pemrbt, group_id, 0x10, 0, 16);
+
+static inline void
+mlxsw_reg_pemrbt_pack(char *payload, enum mlxsw_reg_pemrbt_protocol protocol,
+ u16 group_id)
+{
+ MLXSW_REG_ZERO(pemrbt, payload);
+ mlxsw_reg_pemrbt_protocol_set(payload, protocol);
+ mlxsw_reg_pemrbt_group_id_set(payload, group_id);
+}
+
/* PTCE-V2 - Policy-Engine TCAM Entry Register Version 2
* -----------------------------------------------------
* This register is used for accessing rules within a TCAM region.
@@ -2573,7 +2752,7 @@
mlxsw_reg_perpt_erpt_bank_set(payload, erpt_bank);
mlxsw_reg_perpt_erpt_index_set(payload, erpt_index);
mlxsw_reg_perpt_key_size_set(payload, key_size);
- mlxsw_reg_perpt_bf_bypass_set(payload, true);
+ mlxsw_reg_perpt_bf_bypass_set(payload, false);
mlxsw_reg_perpt_erp_id_set(payload, erp_id);
mlxsw_reg_perpt_erpt_base_bank_set(payload, erpt_base_bank);
mlxsw_reg_perpt_erpt_base_index_set(payload, erpt_base_index);
@@ -2765,8 +2944,9 @@
u32 priority,
const char *tcam_region_info,
const char *key, u8 erp_id,
- bool large_exists, u32 lkey_id,
- u32 action_pointer)
+ u16 delta_start, u8 delta_mask,
+ u8 delta_value, bool large_exists,
+ u32 lkey_id, u32 action_pointer)
{
MLXSW_REG_ZERO(ptce3, payload);
mlxsw_reg_ptce3_v_set(payload, valid);
@@ -2775,6 +2955,9 @@
mlxsw_reg_ptce3_tcam_region_info_memcpy_to(payload, tcam_region_info);
mlxsw_reg_ptce3_flex2_key_blocks_memcpy_to(payload, key);
mlxsw_reg_ptce3_erp_id_set(payload, erp_id);
+ mlxsw_reg_ptce3_delta_start_set(payload, delta_start);
+ mlxsw_reg_ptce3_delta_mask_set(payload, delta_mask);
+ mlxsw_reg_ptce3_delta_value_set(payload, delta_value);
mlxsw_reg_ptce3_large_exists_set(payload, large_exists);
mlxsw_reg_ptce3_large_entry_key_id_set(payload, lkey_id);
mlxsw_reg_ptce3_action_pointer_set(payload, action_pointer);
@@ -2832,7 +3015,7 @@
mlxsw_reg_percr_region_id_set(payload, region_id);
mlxsw_reg_percr_atcam_ignore_prune_set(payload, false);
mlxsw_reg_percr_ctcam_ignore_prune_set(payload, false);
- mlxsw_reg_percr_bf_bypass_set(payload, true);
+ mlxsw_reg_percr_bf_bypass_set(payload, false);
}
/* PERERP - Policy-Engine Region eRP Register
@@ -2921,6 +3104,72 @@
mlxsw_reg_pererp_master_rp_id_set(payload, master_rp_id);
}
+/* PEABFE - Policy-Engine Algorithmic Bloom Filter Entries Register
+ * ----------------------------------------------------------------
+ * This register configures the Bloom filter entries.
+ */
+#define MLXSW_REG_PEABFE_ID 0x3022
+#define MLXSW_REG_PEABFE_BASE_LEN 0x10
+#define MLXSW_REG_PEABFE_BF_REC_LEN 0x4
+#define MLXSW_REG_PEABFE_BF_REC_MAX_COUNT 256
+#define MLXSW_REG_PEABFE_LEN (MLXSW_REG_PEABFE_BASE_LEN + \
+ MLXSW_REG_PEABFE_BF_REC_LEN * \
+ MLXSW_REG_PEABFE_BF_REC_MAX_COUNT)
+
+MLXSW_REG_DEFINE(peabfe, MLXSW_REG_PEABFE_ID, MLXSW_REG_PEABFE_LEN);
+
+/* reg_peabfe_size
+ * Number of BF entries to be updated.
+ * Range 1..256
+ * Access: Op
+ */
+MLXSW_ITEM32(reg, peabfe, size, 0x00, 0, 9);
+
+/* reg_peabfe_bf_entry_state
+ * Bloom filter state
+ * 0 - Clear
+ * 1 - Set
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, peabfe, bf_entry_state,
+ MLXSW_REG_PEABFE_BASE_LEN, 31, 1,
+ MLXSW_REG_PEABFE_BF_REC_LEN, 0x00, false);
+
+/* reg_peabfe_bf_entry_bank
+ * Bloom filter bank ID
+ * Range 0..cap_max_erp_table_banks-1
+ * Access: Index
+ */
+MLXSW_ITEM32_INDEXED(reg, peabfe, bf_entry_bank,
+ MLXSW_REG_PEABFE_BASE_LEN, 24, 4,
+ MLXSW_REG_PEABFE_BF_REC_LEN, 0x00, false);
+
+/* reg_peabfe_bf_entry_index
+ * Bloom filter entry index
+ * Range 0..2^cap_max_bf_log-1
+ * Access: Index
+ */
+MLXSW_ITEM32_INDEXED(reg, peabfe, bf_entry_index,
+ MLXSW_REG_PEABFE_BASE_LEN, 0, 24,
+ MLXSW_REG_PEABFE_BF_REC_LEN, 0x00, false);
+
+static inline void mlxsw_reg_peabfe_pack(char *payload)
+{
+ MLXSW_REG_ZERO(peabfe, payload);
+}
+
+static inline void mlxsw_reg_peabfe_rec_pack(char *payload, int rec_index,
+ u8 state, u8 bank, u32 bf_index)
+{
+ u8 num_rec = mlxsw_reg_peabfe_size_get(payload);
+
+ if (rec_index >= num_rec)
+ mlxsw_reg_peabfe_size_set(payload, rec_index + 1);
+ mlxsw_reg_peabfe_bf_entry_state_set(payload, rec_index, state);
+ mlxsw_reg_peabfe_bf_entry_bank_set(payload, rec_index, bank);
+ mlxsw_reg_peabfe_bf_entry_index_set(payload, rec_index, bf_index);
+}
+
/* IEDR - Infrastructure Entry Delete Register
* ----------------------------------------------------
* This register is used for deleting entries from the entry tables.
@@ -2954,7 +3203,7 @@
* Size of entries do be deleted. The unit is 1 entry, regardless of entry type.
* Access: OP
*/
-MLXSW_ITEM32_INDEXED(reg, iedr, rec_size, MLXSW_REG_IEDR_BASE_LEN, 0, 11,
+MLXSW_ITEM32_INDEXED(reg, iedr, rec_size, MLXSW_REG_IEDR_BASE_LEN, 0, 13,
MLXSW_REG_IEDR_REC_LEN, 0x00, false);
/* reg_iedr_rec_index_start
@@ -3046,6 +3295,12 @@
* Access: Index
*/
MLXSW_ITEM32(reg, qpcr, pid, 0x00, 0, 14);
+
+/* reg_qpcr_clear_counter
+ * Clear counters.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, qpcr, clear_counter, 0x04, 31, 1);
/* reg_qpcr_color_aware
* Is the policer aware of colors.
@@ -3144,6 +3399,26 @@
*/
MLXSW_ITEM32(reg, qpcr, violate_action, 0x18, 0, 4);
+/* reg_qpcr_violate_count
+ * Counts the number of times violate_action happened on this PID.
+ * Access: RW
+ */
+MLXSW_ITEM64(reg, qpcr, violate_count, 0x20, 0, 64);
+
+/* Packets */
+#define MLXSW_REG_QPCR_LOWEST_CIR 1
+#define MLXSW_REG_QPCR_HIGHEST_CIR (2 * 1000 * 1000 * 1000) /* 2Gpps */
+#define MLXSW_REG_QPCR_LOWEST_CBS 4
+#define MLXSW_REG_QPCR_HIGHEST_CBS 24
+
+/* Bandwidth */
+#define MLXSW_REG_QPCR_LOWEST_CIR_BITS 1024 /* bps */
+#define MLXSW_REG_QPCR_HIGHEST_CIR_BITS 2000000000000ULL /* 2Tbps */
+#define MLXSW_REG_QPCR_LOWEST_CBS_BITS_SP1 4
+#define MLXSW_REG_QPCR_LOWEST_CBS_BITS_SP2 4
+#define MLXSW_REG_QPCR_HIGHEST_CBS_BITS_SP1 25
+#define MLXSW_REG_QPCR_HIGHEST_CBS_BITS_SP2 31
+
static inline void mlxsw_reg_qpcr_pack(char *payload, u16 pid,
enum mlxsw_reg_qpcr_ir_units ir_units,
bool bytes, u32 cir, u16 cbs)
@@ -3228,10 +3503,10 @@
MLXSW_ITEM32(reg, qeec, local_port, 0x00, 16, 8);
enum mlxsw_reg_qeec_hr {
- MLXSW_REG_QEEC_HIERARCY_PORT,
- MLXSW_REG_QEEC_HIERARCY_GROUP,
- MLXSW_REG_QEEC_HIERARCY_SUBGROUP,
- MLXSW_REG_QEEC_HIERARCY_TC,
+ MLXSW_REG_QEEC_HR_PORT,
+ MLXSW_REG_QEEC_HR_GROUP,
+ MLXSW_REG_QEEC_HR_SUBGROUP,
+ MLXSW_REG_QEEC_HR_TC,
};
/* reg_qeec_element_hierarchy
@@ -3265,6 +3540,18 @@
* Access: RW
*/
MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1);
+
+/* reg_qeec_ptps
+ * PTP shaper
+ * 0: regular shaper mode
+ * 1: PTP oriented shaper
+ * Allowed only for hierarchy 0
+ * Not supported for CPU port
+ * Note that ptps mode may affect the shaper rates of all hierarchies
+ * Supported only on Spectrum-1
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, ptps, 0x0C, 29, 1);
enum {
MLXSW_REG_QEEC_BYTES_MODE,
@@ -3302,8 +3589,8 @@
*/
MLXSW_ITEM32(reg, qeec, mase, 0x10, 31, 1);
-/* A large max rate will disable the max shaper. */
-#define MLXSW_REG_QEEC_MAS_DIS 200000000 /* Kbps */
+/* The largest max shaper value possible to disable the shaper. */
+#define MLXSW_REG_QEEC_MAS_DIS ((1u << 31) - 1) /* Kbps */
/* reg_qeec_max_shaper_rate
* Max shaper information rate.
@@ -3311,7 +3598,7 @@
* When in bytes mode, value is specified in units of 1000bps.
* Access: RW
*/
-MLXSW_ITEM32(reg, qeec, max_shaper_rate, 0x10, 0, 28);
+MLXSW_ITEM32(reg, qeec, max_shaper_rate, 0x10, 0, 31);
/* reg_qeec_de
* DWRR configuration enable. Enables configuration of the dwrr and
@@ -3341,6 +3628,21 @@
*/
MLXSW_ITEM32(reg, qeec, dwrr_weight, 0x18, 0, 8);
+/* reg_qeec_max_shaper_bs
+ * Max shaper burst size
+ * Burst size is 2^max_shaper_bs * 512 bits
+ * For Spectrum-1: Range is: 5..25
+ * For Spectrum-2: Range is: 11..25
+ * Reserved when ptps = 1
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, max_shaper_bs, 0x1C, 0, 6);
+
+#define MLXSW_REG_QEEC_HIGHEST_SHAPER_BS 25
+#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP1 5
+#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP2 11
+#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP3 11
+
static inline void mlxsw_reg_qeec_pack(char *payload, u8 local_port,
enum mlxsw_reg_qeec_hr hr, u8 index,
u8 next_index)
@@ -3350,6 +3652,15 @@
mlxsw_reg_qeec_element_hierarchy_set(payload, hr);
mlxsw_reg_qeec_element_index_set(payload, index);
mlxsw_reg_qeec_next_element_index_set(payload, next_index);
+}
+
+static inline void mlxsw_reg_qeec_ptps_pack(char *payload, u8 local_port,
+ bool ptps)
+{
+ MLXSW_REG_ZERO(qeec, payload);
+ mlxsw_reg_qeec_local_port_set(payload, local_port);
+ mlxsw_reg_qeec_element_hierarchy_set(payload, MLXSW_REG_QEEC_HR_PORT);
+ mlxsw_reg_qeec_ptps_set(payload, ptps);
}
/* QRWE - QoS ReWrite Enable
@@ -3478,6 +3789,38 @@
mlxsw_reg_qpdsm_prio_entry_color2_dscp_set(payload, prio, dscp);
}
+/* QPDP - QoS Port DSCP to Priority Mapping Register
+ * -------------------------------------------------
+ * This register controls the port default Switch Priority and Color. The
+ * default Switch Priority and Color are used for frames where the trust state
+ * uses default values. All member ports of a LAG should be configured with the
+ * same default values.
+ */
+#define MLXSW_REG_QPDP_ID 0x4007
+#define MLXSW_REG_QPDP_LEN 0x8
+
+MLXSW_REG_DEFINE(qpdp, MLXSW_REG_QPDP_ID, MLXSW_REG_QPDP_LEN);
+
+/* reg_qpdp_local_port
+ * Local Port. Supported for data packets from CPU port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, qpdp, local_port, 0x00, 16, 8);
+
+/* reg_qpdp_switch_prio
+ * Default port Switch Priority (default 0)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpdp, switch_prio, 0x04, 0, 4);
+
+static inline void mlxsw_reg_qpdp_pack(char *payload, u8 local_port,
+ u8 switch_prio)
+{
+ MLXSW_REG_ZERO(qpdp, payload);
+ mlxsw_reg_qpdp_local_port_set(payload, local_port);
+ mlxsw_reg_qpdp_switch_prio_set(payload, switch_prio);
+}
+
/* QPDPM - QoS Port DSCP to Priority Mapping Register
* --------------------------------------------------
* This register controls the mapping from DSCP field to
@@ -3565,6 +3908,112 @@
mlxsw_reg_qtctm_mc_set(payload, mc);
}
+/* QPSC - QoS PTP Shaper Configuration Register
+ * --------------------------------------------
+ * The QPSC allows advanced configuration of the shapers when QEEC.ptps=1.
+ * Supported only on Spectrum-1.
+ */
+#define MLXSW_REG_QPSC_ID 0x401B
+#define MLXSW_REG_QPSC_LEN 0x28
+
+MLXSW_REG_DEFINE(qpsc, MLXSW_REG_QPSC_ID, MLXSW_REG_QPSC_LEN);
+
+enum mlxsw_reg_qpsc_port_speed {
+ MLXSW_REG_QPSC_PORT_SPEED_100M,
+ MLXSW_REG_QPSC_PORT_SPEED_1G,
+ MLXSW_REG_QPSC_PORT_SPEED_10G,
+ MLXSW_REG_QPSC_PORT_SPEED_25G,
+};
+
+/* reg_qpsc_port_speed
+ * Port speed.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, qpsc, port_speed, 0x00, 0, 4);
+
+/* reg_qpsc_shaper_time_exp
+ * The base-time-interval for updating the shapers tokens (for all hierarchies).
+ * shaper_update_rate = 2 ^ shaper_time_exp * (1 + shaper_time_mantissa) * 32nSec
+ * shaper_rate = 64bit * shaper_inc / shaper_update_rate
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, shaper_time_exp, 0x04, 16, 4);
+
+/* reg_qpsc_shaper_time_mantissa
+ * The base-time-interval for updating the shapers tokens (for all hierarchies).
+ * shaper_update_rate = 2 ^ shaper_time_exp * (1 + shaper_time_mantissa) * 32nSec
+ * shaper_rate = 64bit * shaper_inc / shaper_update_rate
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, shaper_time_mantissa, 0x04, 0, 5);
+
+/* reg_qpsc_shaper_inc
+ * Number of tokens added to shaper on each update.
+ * Units of 8B.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, shaper_inc, 0x08, 0, 5);
+
+/* reg_qpsc_shaper_bs
+ * Max shaper Burst size.
+ * Burst size is 2 ^ max_shaper_bs * 512 [bits]
+ * Range is: 5..25 (from 2KB..2GB)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, shaper_bs, 0x0C, 0, 6);
+
+/* reg_qpsc_ptsc_we
+ * Write enable to port_to_shaper_credits.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, qpsc, ptsc_we, 0x10, 31, 1);
+
+/* reg_qpsc_port_to_shaper_credits
+ * For split ports: range 1..57
+ * For non-split ports: range 1..112
+ * Written only when ptsc_we is set.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, port_to_shaper_credits, 0x10, 0, 8);
+
+/* reg_qpsc_ing_timestamp_inc
+ * Ingress timestamp increment.
+ * 2's complement.
+ * The timestamp of MTPPTR at ingress will be incremented by this value. Global
+ * value for all ports.
+ * Same units as used by MTPPTR.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, ing_timestamp_inc, 0x20, 0, 32);
+
+/* reg_qpsc_egr_timestamp_inc
+ * Egress timestamp increment.
+ * 2's complement.
+ * The timestamp of MTPPTR at egress will be incremented by this value. Global
+ * value for all ports.
+ * Same units as used by MTPPTR.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpsc, egr_timestamp_inc, 0x24, 0, 32);
+
+static inline void
+mlxsw_reg_qpsc_pack(char *payload, enum mlxsw_reg_qpsc_port_speed port_speed,
+ u8 shaper_time_exp, u8 shaper_time_mantissa, u8 shaper_inc,
+ u8 shaper_bs, u8 port_to_shaper_credits,
+ int ing_timestamp_inc, int egr_timestamp_inc)
+{
+ MLXSW_REG_ZERO(qpsc, payload);
+ mlxsw_reg_qpsc_port_speed_set(payload, port_speed);
+ mlxsw_reg_qpsc_shaper_time_exp_set(payload, shaper_time_exp);
+ mlxsw_reg_qpsc_shaper_time_mantissa_set(payload, shaper_time_mantissa);
+ mlxsw_reg_qpsc_shaper_inc_set(payload, shaper_inc);
+ mlxsw_reg_qpsc_shaper_bs_set(payload, shaper_bs);
+ mlxsw_reg_qpsc_ptsc_we_set(payload, true);
+ mlxsw_reg_qpsc_port_to_shaper_credits_set(payload, port_to_shaper_credits);
+ mlxsw_reg_qpsc_ing_timestamp_inc_set(payload, ing_timestamp_inc);
+ mlxsw_reg_qpsc_egr_timestamp_inc_set(payload, egr_timestamp_inc);
+}
+
/* PMLP - Ports Module to Local Port Register
* ------------------------------------------
* Configures the assignment of modules to local ports.
@@ -3592,6 +4041,7 @@
* 1 - Lane 0 is used.
* 2 - Lanes 0 and 1 are used.
* 4 - Lanes 0, 1, 2 and 3 are used.
+ * 8 - Lanes 0-7 are used.
* Access: RW
*/
MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8);
@@ -3606,14 +4056,14 @@
* Tx Lane. When rxtx field is cleared, this field is used for Rx as well.
* Access: RW
*/
-MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 0x00, false);
+MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 4, 0x04, 0x00, false);
/* reg_pmlp_rx_lane
* Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is
* equal to Tx lane.
* Access: RW
*/
-MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 0x00, false);
+MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 4, 0x04, 0x00, false);
static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port)
{
@@ -3722,15 +4172,32 @@
*/
MLXSW_ITEM32(reg, ptys, an_status, 0x04, 28, 4);
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_SGMII_100M BIT(0)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_1000BASE_X_SGMII BIT(1)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_5GBASE_R BIT(3)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_XFI_XAUI_1_10G BIT(4)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_XLAUI_4_XLPPI_4_40G BIT(5)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_25GAUI_1_25GBASE_CR_KR BIT(6)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_50GAUI_2_LAUI_2_50GBASE_CR2_KR2 BIT(7)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_50GAUI_1_LAUI_1_50GBASE_CR_KR BIT(8)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_CAUI_4_100GBASE_CR4_KR4 BIT(9)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_100GAUI_2_100GBASE_CR2_KR2 BIT(10)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_200GAUI_4_200GBASE_CR4_KR4 BIT(12)
+#define MLXSW_REG_PTYS_EXT_ETH_SPEED_400GAUI_8 BIT(15)
+
+/* reg_ptys_ext_eth_proto_cap
+ * Extended Ethernet port supported speeds and protocols.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, ext_eth_proto_cap, 0x08, 0, 32);
+
#define MLXSW_REG_PTYS_ETH_SPEED_SGMII BIT(0)
#define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX BIT(1)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 BIT(2)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4 BIT(3)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR BIT(4)
-#define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5)
#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6)
#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7)
-#define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4 BIT(8)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR BIT(13)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR BIT(14)
@@ -3742,9 +4209,6 @@
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23)
-#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX BIT(24)
-#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T BIT(25)
-#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T BIT(26)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29)
@@ -3776,6 +4240,12 @@
*/
MLXSW_ITEM32(reg, ptys, ib_proto_cap, 0x10, 0, 16);
+/* reg_ptys_ext_eth_proto_admin
+ * Extended speed and protocol to set port to.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ptys, ext_eth_proto_admin, 0x14, 0, 32);
+
/* reg_ptys_eth_proto_admin
* Speed and protocol to set port to.
* Access: RW
@@ -3793,6 +4263,12 @@
* Access: RW
*/
MLXSW_ITEM32(reg, ptys, ib_proto_admin, 0x1C, 0, 16);
+
+/* reg_ptys_ext_eth_proto_oper
+ * The extended current speed and protocol configured for the port.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, ext_eth_proto_oper, 0x20, 0, 32);
/* reg_ptys_eth_proto_oper
* The current speed and protocol configured for the port.
@@ -3812,12 +4288,23 @@
*/
MLXSW_ITEM32(reg, ptys, ib_proto_oper, 0x28, 0, 16);
-/* reg_ptys_eth_proto_lp_advertise
- * The protocols that were advertised by the link partner during
- * autonegotiation.
+enum mlxsw_reg_ptys_connector_type {
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_UNKNOWN_OR_NO_CONNECTOR,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_NONE,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_TP,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_AUI,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_BNC,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_MII,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_FIBRE,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_DA,
+ MLXSW_REG_PTYS_CONNECTOR_TYPE_PORT_OTHER,
+};
+
+/* reg_ptys_connector_type
+ * Connector type indication.
* Access: RO
*/
-MLXSW_ITEM32(reg, ptys, eth_proto_lp_advertise, 0x30, 0, 32);
+MLXSW_ITEM32(reg, ptys, connector_type, 0x2C, 0, 4);
static inline void mlxsw_reg_ptys_eth_pack(char *payload, u8 local_port,
u32 proto_admin, bool autoneg)
@@ -3829,17 +4316,46 @@
mlxsw_reg_ptys_an_disable_admin_set(payload, !autoneg);
}
+static inline void mlxsw_reg_ptys_ext_eth_pack(char *payload, u8 local_port,
+ u32 proto_admin, bool autoneg)
+{
+ MLXSW_REG_ZERO(ptys, payload);
+ mlxsw_reg_ptys_local_port_set(payload, local_port);
+ mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH);
+ mlxsw_reg_ptys_ext_eth_proto_admin_set(payload, proto_admin);
+ mlxsw_reg_ptys_an_disable_admin_set(payload, !autoneg);
+}
+
static inline void mlxsw_reg_ptys_eth_unpack(char *payload,
u32 *p_eth_proto_cap,
- u32 *p_eth_proto_adm,
+ u32 *p_eth_proto_admin,
u32 *p_eth_proto_oper)
{
if (p_eth_proto_cap)
- *p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload);
- if (p_eth_proto_adm)
- *p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload);
+ *p_eth_proto_cap =
+ mlxsw_reg_ptys_eth_proto_cap_get(payload);
+ if (p_eth_proto_admin)
+ *p_eth_proto_admin =
+ mlxsw_reg_ptys_eth_proto_admin_get(payload);
if (p_eth_proto_oper)
- *p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload);
+ *p_eth_proto_oper =
+ mlxsw_reg_ptys_eth_proto_oper_get(payload);
+}
+
+static inline void mlxsw_reg_ptys_ext_eth_unpack(char *payload,
+ u32 *p_eth_proto_cap,
+ u32 *p_eth_proto_admin,
+ u32 *p_eth_proto_oper)
+{
+ if (p_eth_proto_cap)
+ *p_eth_proto_cap =
+ mlxsw_reg_ptys_ext_eth_proto_cap_get(payload);
+ if (p_eth_proto_admin)
+ *p_eth_proto_admin =
+ mlxsw_reg_ptys_ext_eth_proto_admin_get(payload);
+ if (p_eth_proto_oper)
+ *p_eth_proto_oper =
+ mlxsw_reg_ptys_ext_eth_proto_oper_get(payload);
}
static inline void mlxsw_reg_ptys_ib_pack(char *payload, u8 local_port,
@@ -4162,8 +4678,11 @@
enum mlxsw_reg_ppcnt_grp {
MLXSW_REG_PPCNT_IEEE_8023_CNT = 0x0,
+ MLXSW_REG_PPCNT_RFC_2863_CNT = 0x1,
MLXSW_REG_PPCNT_RFC_2819_CNT = 0x2,
+ MLXSW_REG_PPCNT_RFC_3635_CNT = 0x3,
MLXSW_REG_PPCNT_EXT_CNT = 0x5,
+ MLXSW_REG_PPCNT_DISCARD_CNT = 0x6,
MLXSW_REG_PPCNT_PRIO_CNT = 0x10,
MLXSW_REG_PPCNT_TC_CNT = 0x11,
MLXSW_REG_PPCNT_TC_CONG_TC = 0x13,
@@ -4178,6 +4697,7 @@
* 0x2: RFC 2819 Counters
* 0x3: RFC 3635 Counters
* 0x5: Ethernet Extended Counters
+ * 0x6: Ethernet Discard Counters
* 0x8: Link Level Retransmission Counters
* 0x10: Per Priority Counters
* 0x11: Per Traffic Class Counters
@@ -4321,7 +4841,45 @@
MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted,
MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x90, 0, 64);
+/* Ethernet RFC 2863 Counter Group */
+
+/* reg_ppcnt_if_in_discards
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, if_in_discards,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x10, 0, 64);
+
+/* reg_ppcnt_if_out_discards
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, if_out_discards,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x38, 0, 64);
+
+/* reg_ppcnt_if_out_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, if_out_errors,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x40, 0, 64);
+
/* Ethernet RFC 2819 Counter Group */
+
+/* reg_ppcnt_ether_stats_undersize_pkts
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ether_stats_undersize_pkts,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x30, 0, 64);
+
+/* reg_ppcnt_ether_stats_oversize_pkts
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ether_stats_oversize_pkts,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x38, 0, 64);
+
+/* reg_ppcnt_ether_stats_fragments
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ether_stats_fragments,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x40, 0, 64);
/* reg_ppcnt_ether_stats_pkts64octets
* Access: RO
@@ -4383,6 +4941,32 @@
MLXSW_ITEM64(reg, ppcnt, ether_stats_pkts8192to10239octets,
MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0xA0, 0, 64);
+/* Ethernet RFC 3635 Counter Group */
+
+/* reg_ppcnt_dot3stats_fcs_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, dot3stats_fcs_errors,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x08, 0, 64);
+
+/* reg_ppcnt_dot3stats_symbol_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, dot3stats_symbol_errors,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x60, 0, 64);
+
+/* reg_ppcnt_dot3control_in_unknown_opcodes
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, dot3control_in_unknown_opcodes,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x68, 0, 64);
+
+/* reg_ppcnt_dot3in_pause_frames
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, dot3in_pause_frames,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x70, 0, 64);
+
/* Ethernet Extended Counter Group Counters */
/* reg_ppcnt_ecn_marked
@@ -4390,6 +4974,80 @@
*/
MLXSW_ITEM64(reg, ppcnt, ecn_marked,
MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x08, 0, 64);
+
+/* Ethernet Discard Counter Group Counters */
+
+/* reg_ppcnt_ingress_general
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ingress_general,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x00, 0, 64);
+
+/* reg_ppcnt_ingress_policy_engine
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ingress_policy_engine,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x08, 0, 64);
+
+/* reg_ppcnt_ingress_vlan_membership
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ingress_vlan_membership,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x10, 0, 64);
+
+/* reg_ppcnt_ingress_tag_frame_type
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ingress_tag_frame_type,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x18, 0, 64);
+
+/* reg_ppcnt_egress_vlan_membership
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, egress_vlan_membership,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x20, 0, 64);
+
+/* reg_ppcnt_loopback_filter
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, loopback_filter,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x28, 0, 64);
+
+/* reg_ppcnt_egress_general
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, egress_general,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x30, 0, 64);
+
+/* reg_ppcnt_egress_hoq
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, egress_hoq,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x40, 0, 64);
+
+/* reg_ppcnt_egress_policy_engine
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, egress_policy_engine,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x50, 0, 64);
+
+/* reg_ppcnt_ingress_tx_link_down
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, ingress_tx_link_down,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x58, 0, 64);
+
+/* reg_ppcnt_egress_stp_filter
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, egress_stp_filter,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x60, 0, 64);
+
+/* reg_ppcnt_egress_sll
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, egress_sll,
+ MLXSW_REG_PPCNT_COUNTERS_OFFSET + 0x70, 0, 64);
/* Ethernet Per Priority Group Counters */
@@ -4748,6 +5406,257 @@
mlxsw_reg_pspa_sub_port_set(payload, 0);
}
+/* PMAOS - Ports Module Administrative and Operational Status
+ * ----------------------------------------------------------
+ * This register configures and retrieves the per module status.
+ */
+#define MLXSW_REG_PMAOS_ID 0x5012
+#define MLXSW_REG_PMAOS_LEN 0x10
+
+MLXSW_REG_DEFINE(pmaos, MLXSW_REG_PMAOS_ID, MLXSW_REG_PMAOS_LEN);
+
+/* reg_slot_index
+ * Slot index.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmaos, slot_index, 0x00, 24, 4);
+
+/* reg_pmaos_module
+ * Module number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmaos, module, 0x00, 16, 8);
+
+/* reg_pmaos_ase
+ * Admin state update enable.
+ * If this bit is set, admin state will be updated based on admin_state field.
+ * Only relevant on Set() operations.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, pmaos, ase, 0x04, 31, 1);
+
+/* reg_pmaos_ee
+ * Event update enable.
+ * If this bit is set, event generation will be updated based on the e field.
+ * Only relevant on Set operations.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, pmaos, ee, 0x04, 30, 1);
+
+enum mlxsw_reg_pmaos_e {
+ MLXSW_REG_PMAOS_E_DO_NOT_GENERATE_EVENT,
+ MLXSW_REG_PMAOS_E_GENERATE_EVENT,
+ MLXSW_REG_PMAOS_E_GENERATE_SINGLE_EVENT,
+};
+
+/* reg_pmaos_e
+ * Event Generation on operational state change.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmaos, e, 0x04, 0, 2);
+
+static inline void mlxsw_reg_pmaos_pack(char *payload, u8 module,
+ enum mlxsw_reg_pmaos_e e)
+{
+ MLXSW_REG_ZERO(pmaos, payload);
+ mlxsw_reg_pmaos_module_set(payload, module);
+ mlxsw_reg_pmaos_e_set(payload, e);
+ mlxsw_reg_pmaos_ee_set(payload, true);
+}
+
+/* PPLR - Port Physical Loopback Register
+ * --------------------------------------
+ * This register allows configuration of the port's loopback mode.
+ */
+#define MLXSW_REG_PPLR_ID 0x5018
+#define MLXSW_REG_PPLR_LEN 0x8
+
+MLXSW_REG_DEFINE(pplr, MLXSW_REG_PPLR_ID, MLXSW_REG_PPLR_LEN);
+
+/* reg_pplr_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pplr, local_port, 0x00, 16, 8);
+
+/* Phy local loopback. When set the port's egress traffic is looped back
+ * to the receiver and the port transmitter is disabled.
+ */
+#define MLXSW_REG_PPLR_LB_TYPE_BIT_PHY_LOCAL BIT(1)
+
+/* reg_pplr_lb_en
+ * Loopback enable.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pplr, lb_en, 0x04, 0, 8);
+
+static inline void mlxsw_reg_pplr_pack(char *payload, u8 local_port,
+ bool phy_local)
+{
+ MLXSW_REG_ZERO(pplr, payload);
+ mlxsw_reg_pplr_local_port_set(payload, local_port);
+ mlxsw_reg_pplr_lb_en_set(payload,
+ phy_local ?
+ MLXSW_REG_PPLR_LB_TYPE_BIT_PHY_LOCAL : 0);
+}
+
+/* PMPE - Port Module Plug/Unplug Event Register
+ * ---------------------------------------------
+ * This register reports any operational status change of a module.
+ * A change in the module’s state will generate an event only if the change
+ * happens after arming the event mechanism. Any changes to the module state
+ * while the event mechanism is not armed will not be reported. Software can
+ * query the PMPE register for module status.
+ */
+#define MLXSW_REG_PMPE_ID 0x5024
+#define MLXSW_REG_PMPE_LEN 0x10
+
+MLXSW_REG_DEFINE(pmpe, MLXSW_REG_PMPE_ID, MLXSW_REG_PMPE_LEN);
+
+/* reg_pmpe_slot_index
+ * Slot index.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmpe, slot_index, 0x00, 24, 4);
+
+/* reg_pmpe_module
+ * Module number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmpe, module, 0x00, 16, 8);
+
+enum mlxsw_reg_pmpe_module_status {
+ MLXSW_REG_PMPE_MODULE_STATUS_PLUGGED_ENABLED = 1,
+ MLXSW_REG_PMPE_MODULE_STATUS_UNPLUGGED,
+ MLXSW_REG_PMPE_MODULE_STATUS_PLUGGED_ERROR,
+ MLXSW_REG_PMPE_MODULE_STATUS_PLUGGED_DISABLED,
+};
+
+/* reg_pmpe_module_status
+ * Module status.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pmpe, module_status, 0x00, 0, 4);
+
+/* reg_pmpe_error_type
+ * Module error details.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pmpe, error_type, 0x04, 8, 4);
+
+/* PDDR - Port Diagnostics Database Register
+ * -----------------------------------------
+ * The PDDR enables to read the Phy debug database
+ */
+#define MLXSW_REG_PDDR_ID 0x5031
+#define MLXSW_REG_PDDR_LEN 0x100
+
+MLXSW_REG_DEFINE(pddr, MLXSW_REG_PDDR_ID, MLXSW_REG_PDDR_LEN);
+
+/* reg_pddr_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pddr, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_pddr_page_select {
+ MLXSW_REG_PDDR_PAGE_SELECT_TROUBLESHOOTING_INFO = 1,
+};
+
+/* reg_pddr_page_select
+ * Page select index.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pddr, page_select, 0x04, 0, 8);
+
+enum mlxsw_reg_pddr_trblsh_group_opcode {
+ /* Monitor opcodes */
+ MLXSW_REG_PDDR_TRBLSH_GROUP_OPCODE_MONITOR,
+};
+
+/* reg_pddr_group_opcode
+ * Group selector.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pddr, trblsh_group_opcode, 0x08, 0, 16);
+
+/* reg_pddr_status_opcode
+ * Group selector.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pddr, trblsh_status_opcode, 0x0C, 0, 16);
+
+static inline void mlxsw_reg_pddr_pack(char *payload, u8 local_port,
+ u8 page_select)
+{
+ MLXSW_REG_ZERO(pddr, payload);
+ mlxsw_reg_pddr_local_port_set(payload, local_port);
+ mlxsw_reg_pddr_page_select_set(payload, page_select);
+}
+
+/* PMTM - Port Module Type Mapping Register
+ * ----------------------------------------
+ * The PMTM allows query or configuration of module types.
+ */
+#define MLXSW_REG_PMTM_ID 0x5067
+#define MLXSW_REG_PMTM_LEN 0x10
+
+MLXSW_REG_DEFINE(pmtm, MLXSW_REG_PMTM_ID, MLXSW_REG_PMTM_LEN);
+
+/* reg_pmtm_module
+ * Module number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmtm, module, 0x00, 16, 8);
+
+enum mlxsw_reg_pmtm_module_type {
+ /* Backplane with 4 lanes */
+ MLXSW_REG_PMTM_MODULE_TYPE_BP_4X,
+ /* QSFP */
+ MLXSW_REG_PMTM_MODULE_TYPE_QSFP,
+ /* SFP */
+ MLXSW_REG_PMTM_MODULE_TYPE_SFP,
+ /* Backplane with single lane */
+ MLXSW_REG_PMTM_MODULE_TYPE_BP_1X = 4,
+ /* Backplane with two lane */
+ MLXSW_REG_PMTM_MODULE_TYPE_BP_2X = 8,
+ /* Chip2Chip4x */
+ MLXSW_REG_PMTM_MODULE_TYPE_C2C4X = 10,
+ /* Chip2Chip2x */
+ MLXSW_REG_PMTM_MODULE_TYPE_C2C2X,
+ /* Chip2Chip1x */
+ MLXSW_REG_PMTM_MODULE_TYPE_C2C1X,
+ /* QSFP-DD */
+ MLXSW_REG_PMTM_MODULE_TYPE_QSFP_DD = 14,
+ /* OSFP */
+ MLXSW_REG_PMTM_MODULE_TYPE_OSFP,
+ /* SFP-DD */
+ MLXSW_REG_PMTM_MODULE_TYPE_SFP_DD,
+ /* DSFP */
+ MLXSW_REG_PMTM_MODULE_TYPE_DSFP,
+ /* Chip2Chip8x */
+ MLXSW_REG_PMTM_MODULE_TYPE_C2C8X,
+};
+
+/* reg_pmtm_module_type
+ * Module type.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmtm, module_type, 0x04, 0, 4);
+
+static inline void mlxsw_reg_pmtm_pack(char *payload, u8 module)
+{
+ MLXSW_REG_ZERO(pmtm, payload);
+ mlxsw_reg_pmtm_module_set(payload, module);
+}
+
+static inline void
+mlxsw_reg_pmtm_unpack(char *payload,
+ enum mlxsw_reg_pmtm_module_type *module_type)
+{
+ *module_type = mlxsw_reg_pmtm_module_type_get(payload);
+}
+
/* HTGT - Host Trap Group Table
* ----------------------------
* Configures the properties for forwarding to CPU.
@@ -4773,26 +5682,42 @@
enum mlxsw_reg_htgt_trap_group {
MLXSW_REG_HTGT_TRAP_GROUP_EMAD,
- MLXSW_REG_HTGT_TRAP_GROUP_SX2_RX,
- MLXSW_REG_HTGT_TRAP_GROUP_SX2_CTRL,
+ MLXSW_REG_HTGT_TRAP_GROUP_MFDE,
+ MLXSW_REG_HTGT_TRAP_GROUP_MTWE,
+ MLXSW_REG_HTGT_TRAP_GROUP_PMPE,
MLXSW_REG_HTGT_TRAP_GROUP_SP_STP,
MLXSW_REG_HTGT_TRAP_GROUP_SP_LACP,
MLXSW_REG_HTGT_TRAP_GROUP_SP_LLDP,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_IGMP,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_MC_SNOOPING,
MLXSW_REG_HTGT_TRAP_GROUP_SP_BGP,
MLXSW_REG_HTGT_TRAP_GROUP_SP_OSPF,
MLXSW_REG_HTGT_TRAP_GROUP_SP_PIM,
MLXSW_REG_HTGT_TRAP_GROUP_SP_MULTICAST,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_ARP,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_HOST_MISS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_NEIGH_DISCOVERY,
MLXSW_REG_HTGT_TRAP_GROUP_SP_ROUTER_EXP,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_REMOTE_ROUTE,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_EXTERNAL_ROUTE,
MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME,
MLXSW_REG_HTGT_TRAP_GROUP_SP_DHCP,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_RPF,
MLXSW_REG_HTGT_TRAP_GROUP_SP_EVENT,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_IPV6_MLD,
- MLXSW_REG_HTGT_TRAP_GROUP_SP_IPV6_ND,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_IPV6,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_LBERROR,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_PTP0,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_PTP1,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_VRRP,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_PKT_SAMPLE,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_FLOW_LOGGING,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_FID_MISS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_BFD,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_DUMMY,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_L2_DISCARDS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_L3_DISCARDS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_L3_EXCEPTIONS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_TUNNEL_DISCARDS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_ACL_DISCARDS,
+ MLXSW_REG_HTGT_TRAP_GROUP_SP_BUFFER_DISCARDS,
+
+ __MLXSW_REG_HTGT_TRAP_GROUP_MAX,
+ MLXSW_REG_HTGT_TRAP_GROUP_MAX = __MLXSW_REG_HTGT_TRAP_GROUP_MAX - 1
};
/* reg_htgt_trap_group
@@ -4930,6 +5855,8 @@
MLXSW_REG_HPKT_ACTION_DISCARD,
MLXSW_REG_HPKT_ACTION_SOFT_DISCARD,
MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD,
+ MLXSW_REG_HPKT_ACTION_TRAP_EXCEPTION_TO_CPU,
+ MLXSW_REG_HPKT_ACTION_SET_FW_DEFAULT = 15,
};
/* reg_hpkt_action
@@ -4940,6 +5867,8 @@
* 3 - Discard.
* 4 - Soft discard (allow other traps to act on the packet).
* 5 - Trap and soft discard (allow other traps to overwrite this trap).
+ * 6 - Trap to CPU (CPU receives sole copy) and count it as error.
+ * 15 - Restore the firmware's default action.
* Access: RW
*
* Note: Must be set to 0 (forward) for event trap IDs, as they are already
@@ -4960,7 +5889,7 @@
* Note: A trap ID can only be associated with a single trap group. The device
* will associate the trap ID with the last trap group configured.
*/
-MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9);
+MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 10);
enum {
MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT,
@@ -5283,6 +6212,8 @@
MLXSW_REG_RITR_LOOPBACK_PROTOCOL_IPIP_IPV4,
/* IPinIP IPv6 underlay Unicast */
MLXSW_REG_RITR_LOOPBACK_PROTOCOL_IPIP_IPV6,
+ /* IPinIP generic - used for Spectrum-2 underlay RIF */
+ MLXSW_REG_RITR_LOOPBACK_GENERIC,
};
/* reg_ritr_loopback_protocol
@@ -5322,6 +6253,13 @@
* Access: RW
*/
MLXSW_ITEM32(reg, ritr, loopback_ipip_uvr, 0x10, 0, 16);
+
+/* reg_ritr_loopback_ipip_underlay_rif
+ * Underlay ingress router interface.
+ * Reserved for Spectrum.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, loopback_ipip_underlay_rif, 0x14, 0, 16);
/* reg_ritr_loopback_ipip_usip*
* Encapsulation Underlay source IP.
@@ -5438,11 +6376,12 @@
mlxsw_reg_ritr_loopback_ipip_common_pack(char *payload,
enum mlxsw_reg_ritr_loopback_ipip_type ipip_type,
enum mlxsw_reg_ritr_loopback_ipip_options options,
- u16 uvr_id, u32 gre_key)
+ u16 uvr_id, u16 underlay_rif, u32 gre_key)
{
mlxsw_reg_ritr_loopback_ipip_type_set(payload, ipip_type);
mlxsw_reg_ritr_loopback_ipip_options_set(payload, options);
mlxsw_reg_ritr_loopback_ipip_uvr_set(payload, uvr_id);
+ mlxsw_reg_ritr_loopback_ipip_underlay_rif_set(payload, underlay_rif);
mlxsw_reg_ritr_loopback_ipip_gre_key_set(payload, gre_key);
}
@@ -5450,12 +6389,12 @@
mlxsw_reg_ritr_loopback_ipip4_pack(char *payload,
enum mlxsw_reg_ritr_loopback_ipip_type ipip_type,
enum mlxsw_reg_ritr_loopback_ipip_options options,
- u16 uvr_id, u32 usip, u32 gre_key)
+ u16 uvr_id, u16 underlay_rif, u32 usip, u32 gre_key)
{
mlxsw_reg_ritr_loopback_protocol_set(payload,
MLXSW_REG_RITR_LOOPBACK_PROTOCOL_IPIP_IPV4);
mlxsw_reg_ritr_loopback_ipip_common_pack(payload, ipip_type, options,
- uvr_id, gre_key);
+ uvr_id, underlay_rif, gre_key);
mlxsw_reg_ritr_loopback_ipip_usip4_set(payload, usip);
}
@@ -6817,6 +7756,13 @@
*/
MLXSW_ITEM32(reg, rtdp, tunnel_index, 0x00, 0, 24);
+/* reg_rtdp_egress_router_interface
+ * Underlay egress router interface.
+ * Valid range is from 0 to cap_max_router_interfaces - 1
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rtdp, egress_router_interface, 0x40, 0, 16);
+
/* IPinIP */
/* reg_rtdp_ipip_irif
@@ -7466,6 +8412,35 @@
*p_tach_max = mlxsw_reg_mfsl_tach_max_get(payload);
}
+/* FORE - Fan Out of Range Event Register
+ * --------------------------------------
+ * This register reports the status of the controlled fans compared to the
+ * range defined by the MFSL register.
+ */
+#define MLXSW_REG_FORE_ID 0x9007
+#define MLXSW_REG_FORE_LEN 0x0C
+
+MLXSW_REG_DEFINE(fore, MLXSW_REG_FORE_ID, MLXSW_REG_FORE_LEN);
+
+/* fan_under_limit
+ * Fan speed is below the low limit defined in MFSL register. Each bit relates
+ * to a single tachometer and indicates the specific tachometer reading is
+ * below the threshold.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, fore, fan_under_limit, 0x00, 16, 10);
+
+static inline void mlxsw_reg_fore_unpack(char *payload, u8 tacho,
+ bool *fault)
+{
+ u16 limit;
+
+ if (fault) {
+ limit = mlxsw_reg_fore_fan_under_limit_get(payload);
+ *fault = limit & BIT(tacho);
+ }
+}
+
/* MTCAP - Management Temperature Capabilities
* -------------------------------------------
* This register exposes the capabilities of the device and
@@ -7494,16 +8469,21 @@
MLXSW_REG_DEFINE(mtmp, MLXSW_REG_MTMP_ID, MLXSW_REG_MTMP_LEN);
+#define MLXSW_REG_MTMP_MODULE_INDEX_MIN 64
+#define MLXSW_REG_MTMP_GBOX_INDEX_MIN 256
/* reg_mtmp_sensor_index
* Sensors index to access.
* 64-127 of sensor_index are mapped to the SFP+/QSFP modules sequentially
* (module 0 is mapped to sensor_index 64).
* Access: Index
*/
-MLXSW_ITEM32(reg, mtmp, sensor_index, 0x00, 0, 7);
+MLXSW_ITEM32(reg, mtmp, sensor_index, 0x00, 0, 12);
/* Convert to milli degrees Celsius */
-#define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125)
+#define MLXSW_REG_MTMP_TEMP_TO_MC(val) ({ typeof(val) v_ = (val); \
+ ((v_) >= 0) ? ((v_) * 125) : \
+ ((s16)((GENMASK(15, 0) + (v_) + 1) \
+ * 125)); })
/* reg_mtmp_temperature
* Temperature reading from the sensor. Reading is in 0.125 Celsius
@@ -7538,6 +8518,13 @@
* 2 - Generate single event
* Access: RW
*/
+
+enum mlxsw_reg_mtmp_tee {
+ MLXSW_REG_MTMP_TEE_NO_EVENT,
+ MLXSW_REG_MTMP_TEE_GENERATE_EVENT,
+ MLXSW_REG_MTMP_TEE_GENERATE_SINGLE_EVENT,
+};
+
MLXSW_ITEM32(reg, mtmp, tee, 0x0C, 30, 2);
#define MLXSW_REG_MTMP_THRESH_HI 0x348 /* 105 Celsius */
@@ -7548,6 +8535,7 @@
*/
MLXSW_ITEM32(reg, mtmp, temperature_threshold_hi, 0x0C, 0, 16);
+#define MLXSW_REG_MTMP_HYSTERESIS_TEMP 0x28 /* 5 Celsius */
/* reg_mtmp_temperature_threshold_lo
* Low threshold for Temperature Warning Event. In 0.125 Celsius.
* Access: RW
@@ -7562,7 +8550,7 @@
*/
MLXSW_ITEM_BUF(reg, mtmp, sensor_name, 0x18, MLXSW_REG_MTMP_SENSOR_NAME_SIZE);
-static inline void mlxsw_reg_mtmp_pack(char *payload, u8 sensor_index,
+static inline void mlxsw_reg_mtmp_pack(char *payload, u16 sensor_index,
bool max_temp_enable,
bool max_temp_reset)
{
@@ -7574,11 +8562,10 @@
MLXSW_REG_MTMP_THRESH_HI);
}
-static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,
- unsigned int *p_max_temp,
- char *sensor_name)
+static inline void mlxsw_reg_mtmp_unpack(char *payload, int *p_temp,
+ int *p_max_temp, char *sensor_name)
{
- u16 temp;
+ s16 temp;
if (p_temp) {
temp = mlxsw_reg_mtmp_temperature_get(payload);
@@ -7590,6 +8577,97 @@
}
if (sensor_name)
mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name);
+}
+
+/* MTWE - Management Temperature Warning Event
+ * -------------------------------------------
+ * This register is used for over temperature warning.
+ */
+#define MLXSW_REG_MTWE_ID 0x900B
+#define MLXSW_REG_MTWE_LEN 0x10
+
+MLXSW_REG_DEFINE(mtwe, MLXSW_REG_MTWE_ID, MLXSW_REG_MTWE_LEN);
+
+/* reg_mtwe_sensor_warning
+ * Bit vector indicating which of the sensor reading is above threshold.
+ * Address 00h bit31 is sensor_warning[127].
+ * Address 0Ch bit0 is sensor_warning[0].
+ * Access: RO
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, mtwe, sensor_warning, 0x0, 0x10, 1);
+
+/* MTBR - Management Temperature Bulk Register
+ * -------------------------------------------
+ * This register is used for bulk temperature reading.
+ */
+#define MLXSW_REG_MTBR_ID 0x900F
+#define MLXSW_REG_MTBR_BASE_LEN 0x10 /* base length, without records */
+#define MLXSW_REG_MTBR_REC_LEN 0x04 /* record length */
+#define MLXSW_REG_MTBR_REC_MAX_COUNT 47 /* firmware limitation */
+#define MLXSW_REG_MTBR_LEN (MLXSW_REG_MTBR_BASE_LEN + \
+ MLXSW_REG_MTBR_REC_LEN * \
+ MLXSW_REG_MTBR_REC_MAX_COUNT)
+
+MLXSW_REG_DEFINE(mtbr, MLXSW_REG_MTBR_ID, MLXSW_REG_MTBR_LEN);
+
+/* reg_mtbr_base_sensor_index
+ * Base sensors index to access (0 - ASIC sensor, 1-63 - ambient sensors,
+ * 64-127 are mapped to the SFP+/QSFP modules sequentially).
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtbr, base_sensor_index, 0x00, 0, 12);
+
+/* reg_mtbr_num_rec
+ * Request: Number of records to read
+ * Response: Number of records read
+ * See above description for more details.
+ * Range 1..255
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtbr, num_rec, 0x04, 0, 8);
+
+/* reg_mtbr_rec_max_temp
+ * The highest measured temperature from the sensor.
+ * When the bit mte is cleared, the field max_temperature is reserved.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtbr, rec_max_temp, MLXSW_REG_MTBR_BASE_LEN, 16,
+ 16, MLXSW_REG_MTBR_REC_LEN, 0x00, false);
+
+/* reg_mtbr_rec_temp
+ * Temperature reading from the sensor. Reading is in 0..125 Celsius
+ * degrees units.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtbr, rec_temp, MLXSW_REG_MTBR_BASE_LEN, 0, 16,
+ MLXSW_REG_MTBR_REC_LEN, 0x00, false);
+
+static inline void mlxsw_reg_mtbr_pack(char *payload, u16 base_sensor_index,
+ u8 num_rec)
+{
+ MLXSW_REG_ZERO(mtbr, payload);
+ mlxsw_reg_mtbr_base_sensor_index_set(payload, base_sensor_index);
+ mlxsw_reg_mtbr_num_rec_set(payload, num_rec);
+}
+
+/* Error codes from temperatute reading */
+enum mlxsw_reg_mtbr_temp_status {
+ MLXSW_REG_MTBR_NO_CONN = 0x8000,
+ MLXSW_REG_MTBR_NO_TEMP_SENS = 0x8001,
+ MLXSW_REG_MTBR_INDEX_NA = 0x8002,
+ MLXSW_REG_MTBR_BAD_SENS_INFO = 0x8003,
+};
+
+/* Base index for reading modules temperature */
+#define MLXSW_REG_MTBR_BASE_MODULE_INDEX 64
+
+static inline void mlxsw_reg_mtbr_temp_unpack(char *payload, int rec_ind,
+ u16 *p_temp, u16 *p_max_temp)
+{
+ if (p_temp)
+ *p_temp = mlxsw_reg_mtbr_rec_temp_get(payload, rec_ind);
+ if (p_max_temp)
+ *p_max_temp = mlxsw_reg_mtbr_rec_max_temp_get(payload, rec_ind);
}
/* MCIA - Management Cable Info Access
@@ -7646,13 +8724,53 @@
*/
MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16);
-#define MLXSW_SP_REG_MCIA_EEPROM_SIZE 48
+#define MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH 256
+#define MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH 128
+#define MLXSW_REG_MCIA_EEPROM_SIZE 48
+#define MLXSW_REG_MCIA_I2C_ADDR_LOW 0x50
+#define MLXSW_REG_MCIA_I2C_ADDR_HIGH 0x51
+#define MLXSW_REG_MCIA_PAGE0_LO_OFF 0xa0
+#define MLXSW_REG_MCIA_TH_ITEM_SIZE 2
+#define MLXSW_REG_MCIA_TH_PAGE_NUM 3
+#define MLXSW_REG_MCIA_TH_PAGE_CMIS_NUM 2
+#define MLXSW_REG_MCIA_PAGE0_LO 0
+#define MLXSW_REG_MCIA_TH_PAGE_OFF 0x80
+#define MLXSW_REG_MCIA_EEPROM_CMIS_FLAT_MEMORY BIT(7)
+
+enum mlxsw_reg_mcia_eeprom_module_info_rev_id {
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID_UNSPC = 0x00,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID_8436 = 0x01,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID_8636 = 0x03,
+};
+
+enum mlxsw_reg_mcia_eeprom_module_info_id {
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_SFP = 0x03,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP = 0x0C,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP_PLUS = 0x0D,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP28 = 0x11,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP_DD = 0x18,
+};
+
+enum mlxsw_reg_mcia_eeprom_module_info {
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_TYPE_ID,
+ MLXSW_REG_MCIA_EEPROM_MODULE_INFO_SIZE,
+};
/* reg_mcia_eeprom
* Bytes to read/write.
* Access: RW
*/
-MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_SP_REG_MCIA_EEPROM_SIZE);
+MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_REG_MCIA_EEPROM_SIZE);
+
+/* This is used to access the optional upper pages (1-3) in the QSFP+
+ * memory map. Page 1 is available on offset 256 through 383, page 2 -
+ * on offset 384 through 511, page 3 - on offset 512 through 639.
+ */
+#define MLXSW_REG_MCIA_PAGE_GET(off) (((off) - \
+ MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) / \
+ MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH + 1)
static inline void mlxsw_reg_mcia_pack(char *payload, u8 module, u8 lock,
u8 page_number, u16 device_addr,
@@ -7682,6 +8800,13 @@
* Access: Index
*/
MLXSW_ITEM32(reg, mpat, pa_id, 0x00, 28, 4);
+
+/* reg_mpat_session_id
+ * Mirror Session ID.
+ * Used for MIRROR_SESSION<i> trap.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, session_id, 0x00, 24, 4);
/* reg_mpat_system_port
* A unique port identifier for the final destination of the packet.
@@ -7739,6 +8864,18 @@
* Access: RW
*/
MLXSW_ITEM32(reg, mpat, span_type, 0x04, 0, 4);
+
+/* reg_mpat_pide
+ * Policer enable.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, pide, 0x0C, 15, 1);
+
+/* reg_mpat_pid
+ * Policer ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, pid, 0x0C, 0, 14);
/* Remote SPAN - Ethernet VLAN
* - - - - - - - - - - - - - -
@@ -7878,7 +9015,7 @@
* properties.
*/
#define MLXSW_REG_MPAR_ID 0x901B
-#define MLXSW_REG_MPAR_LEN 0x08
+#define MLXSW_REG_MPAR_LEN 0x0C
MLXSW_REG_DEFINE(mpar, MLXSW_REG_MPAR_ID, MLXSW_REG_MPAR_LEN);
@@ -7921,6 +9058,60 @@
mlxsw_reg_mpar_enable_set(payload, enable);
mlxsw_reg_mpar_i_e_set(payload, i_e);
mlxsw_reg_mpar_pa_id_set(payload, pa_id);
+}
+
+/* MGIR - Management General Information Register
+ * ----------------------------------------------
+ * MGIR register allows software to query the hardware and firmware general
+ * information.
+ */
+#define MLXSW_REG_MGIR_ID 0x9020
+#define MLXSW_REG_MGIR_LEN 0x9C
+
+MLXSW_REG_DEFINE(mgir, MLXSW_REG_MGIR_ID, MLXSW_REG_MGIR_LEN);
+
+/* reg_mgir_hw_info_device_hw_revision
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgir, hw_info_device_hw_revision, 0x0, 16, 16);
+
+#define MLXSW_REG_MGIR_FW_INFO_PSID_SIZE 16
+
+/* reg_mgir_fw_info_psid
+ * PSID (ASCII string).
+ * Access: RO
+ */
+MLXSW_ITEM_BUF(reg, mgir, fw_info_psid, 0x30, MLXSW_REG_MGIR_FW_INFO_PSID_SIZE);
+
+/* reg_mgir_fw_info_extended_major
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgir, fw_info_extended_major, 0x44, 0, 32);
+
+/* reg_mgir_fw_info_extended_minor
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgir, fw_info_extended_minor, 0x48, 0, 32);
+
+/* reg_mgir_fw_info_extended_sub_minor
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgir, fw_info_extended_sub_minor, 0x4C, 0, 32);
+
+static inline void mlxsw_reg_mgir_pack(char *payload)
+{
+ MLXSW_REG_ZERO(mgir, payload);
+}
+
+static inline void
+mlxsw_reg_mgir_unpack(char *payload, u32 *hw_rev, char *fw_info_psid,
+ u32 *fw_major, u32 *fw_minor, u32 *fw_sub_minor)
+{
+ *hw_rev = mlxsw_reg_mgir_hw_info_device_hw_revision_get(payload);
+ mlxsw_reg_mgir_fw_info_psid_memcpy_from(payload, fw_info_psid);
+ *fw_major = mlxsw_reg_mgir_fw_info_extended_major_get(payload);
+ *fw_minor = mlxsw_reg_mgir_fw_info_extended_minor_get(payload);
+ *fw_sub_minor = mlxsw_reg_mgir_fw_info_extended_sub_minor_get(payload);
}
/* MRSR - Management Reset and Shutdown Register
@@ -7986,6 +9177,107 @@
mlxsw_reg_mlcr_local_port_set(payload, local_port);
mlxsw_reg_mlcr_beacon_duration_set(payload, active ?
MLXSW_REG_MLCR_DURATION_MAX : 0);
+}
+
+/* MTPPS - Management Pulse Per Second Register
+ * --------------------------------------------
+ * This register provides the device PPS capabilities, configure the PPS in and
+ * out modules and holds the PPS in time stamp.
+ */
+#define MLXSW_REG_MTPPS_ID 0x9053
+#define MLXSW_REG_MTPPS_LEN 0x3C
+
+MLXSW_REG_DEFINE(mtpps, MLXSW_REG_MTPPS_ID, MLXSW_REG_MTPPS_LEN);
+
+/* reg_mtpps_enable
+ * Enables the PPS functionality the specific pin.
+ * A boolean variable.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtpps, enable, 0x20, 31, 1);
+
+enum mlxsw_reg_mtpps_pin_mode {
+ MLXSW_REG_MTPPS_PIN_MODE_VIRTUAL_PIN = 0x2,
+};
+
+/* reg_mtpps_pin_mode
+ * Pin mode to be used. The mode must comply with the supported modes of the
+ * requested pin.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtpps, pin_mode, 0x20, 8, 4);
+
+#define MLXSW_REG_MTPPS_PIN_SP_VIRTUAL_PIN 7
+
+/* reg_mtpps_pin
+ * Pin to be configured or queried out of the supported pins.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtpps, pin, 0x20, 0, 8);
+
+/* reg_mtpps_time_stamp
+ * When pin_mode = pps_in, the latched device time when it was triggered from
+ * the external GPIO pin.
+ * When pin_mode = pps_out or virtual_pin or pps_out_and_virtual_pin, the target
+ * time to generate next output signal.
+ * Time is in units of device clock.
+ * Access: RW
+ */
+MLXSW_ITEM64(reg, mtpps, time_stamp, 0x28, 0, 64);
+
+static inline void
+mlxsw_reg_mtpps_vpin_pack(char *payload, u64 time_stamp)
+{
+ MLXSW_REG_ZERO(mtpps, payload);
+ mlxsw_reg_mtpps_pin_set(payload, MLXSW_REG_MTPPS_PIN_SP_VIRTUAL_PIN);
+ mlxsw_reg_mtpps_pin_mode_set(payload,
+ MLXSW_REG_MTPPS_PIN_MODE_VIRTUAL_PIN);
+ mlxsw_reg_mtpps_enable_set(payload, true);
+ mlxsw_reg_mtpps_time_stamp_set(payload, time_stamp);
+}
+
+/* MTUTC - Management UTC Register
+ * -------------------------------
+ * Configures the HW UTC counter.
+ */
+#define MLXSW_REG_MTUTC_ID 0x9055
+#define MLXSW_REG_MTUTC_LEN 0x1C
+
+MLXSW_REG_DEFINE(mtutc, MLXSW_REG_MTUTC_ID, MLXSW_REG_MTUTC_LEN);
+
+enum mlxsw_reg_mtutc_operation {
+ MLXSW_REG_MTUTC_OPERATION_SET_TIME_AT_NEXT_SEC = 0,
+ MLXSW_REG_MTUTC_OPERATION_ADJUST_FREQ = 3,
+};
+
+/* reg_mtutc_operation
+ * Operation.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, mtutc, operation, 0x00, 0, 4);
+
+/* reg_mtutc_freq_adjustment
+ * Frequency adjustment: Every PPS the HW frequency will be
+ * adjusted by this value. Units of HW clock, where HW counts
+ * 10^9 HW clocks for 1 HW second.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtutc, freq_adjustment, 0x04, 0, 32);
+
+/* reg_mtutc_utc_sec
+ * UTC seconds.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, mtutc, utc_sec, 0x10, 0, 32);
+
+static inline void
+mlxsw_reg_mtutc_pack(char *payload, enum mlxsw_reg_mtutc_operation oper,
+ u32 freq_adj, u32 utc_sec)
+{
+ MLXSW_REG_ZERO(mtutc, payload);
+ mlxsw_reg_mtutc_operation_set(payload, oper);
+ mlxsw_reg_mtutc_freq_adjustment_set(payload, freq_adj);
+ mlxsw_reg_mtutc_utc_sec_set(payload, utc_sec);
}
/* MCQI - Management Component Query Information
@@ -8299,6 +9591,983 @@
mlxsw_reg_mgpc_opcode_set(payload, opcode);
}
+/* MPRS - Monitoring Parsing State Register
+ * ----------------------------------------
+ * The MPRS register is used for setting up the parsing for hash,
+ * policy-engine and routing.
+ */
+#define MLXSW_REG_MPRS_ID 0x9083
+#define MLXSW_REG_MPRS_LEN 0x14
+
+MLXSW_REG_DEFINE(mprs, MLXSW_REG_MPRS_ID, MLXSW_REG_MPRS_LEN);
+
+/* reg_mprs_parsing_depth
+ * Minimum parsing depth.
+ * Need to enlarge parsing depth according to L3, MPLS, tunnels, ACL
+ * rules, traps, hash, etc. Default is 96 bytes. Reserved when SwitchX-2.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mprs, parsing_depth, 0x00, 0, 16);
+
+/* reg_mprs_parsing_en
+ * Parsing enable.
+ * Bit 0 - Enable parsing of NVE of types VxLAN, VxLAN-GPE, GENEVE and
+ * NVGRE. Default is enabled. Reserved when SwitchX-2.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mprs, parsing_en, 0x04, 0, 16);
+
+/* reg_mprs_vxlan_udp_dport
+ * VxLAN UDP destination port.
+ * Used for identifying VxLAN packets and for dport field in
+ * encapsulation. Default is 4789.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mprs, vxlan_udp_dport, 0x10, 0, 16);
+
+static inline void mlxsw_reg_mprs_pack(char *payload, u16 parsing_depth,
+ u16 vxlan_udp_dport)
+{
+ MLXSW_REG_ZERO(mprs, payload);
+ mlxsw_reg_mprs_parsing_depth_set(payload, parsing_depth);
+ mlxsw_reg_mprs_parsing_en_set(payload, true);
+ mlxsw_reg_mprs_vxlan_udp_dport_set(payload, vxlan_udp_dport);
+}
+
+/* MOGCR - Monitoring Global Configuration Register
+ * ------------------------------------------------
+ */
+#define MLXSW_REG_MOGCR_ID 0x9086
+#define MLXSW_REG_MOGCR_LEN 0x20
+
+MLXSW_REG_DEFINE(mogcr, MLXSW_REG_MOGCR_ID, MLXSW_REG_MOGCR_LEN);
+
+/* reg_mogcr_ptp_iftc
+ * PTP Ingress FIFO Trap Clear
+ * The PTP_ING_FIFO trap provides MTPPTR with clr according
+ * to this value. Default 0.
+ * Reserved when IB switches and when SwitchX/-2, Spectrum-2
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mogcr, ptp_iftc, 0x00, 1, 1);
+
+/* reg_mogcr_ptp_eftc
+ * PTP Egress FIFO Trap Clear
+ * The PTP_EGR_FIFO trap provides MTPPTR with clr according
+ * to this value. Default 0.
+ * Reserved when IB switches and when SwitchX/-2, Spectrum-2
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mogcr, ptp_eftc, 0x00, 0, 1);
+
+/* reg_mogcr_mirroring_pid_base
+ * Base policer id for mirroring policers.
+ * Must have an even value (e.g. 1000, not 1001).
+ * Reserved when SwitchX/-2, Switch-IB/2, Spectrum-1 and Quantum.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mogcr, mirroring_pid_base, 0x0C, 0, 14);
+
+/* MPAGR - Monitoring Port Analyzer Global Register
+ * ------------------------------------------------
+ * This register is used for global port analyzer configurations.
+ * Note: This register is not supported by current FW versions for Spectrum-1.
+ */
+#define MLXSW_REG_MPAGR_ID 0x9089
+#define MLXSW_REG_MPAGR_LEN 0x0C
+
+MLXSW_REG_DEFINE(mpagr, MLXSW_REG_MPAGR_ID, MLXSW_REG_MPAGR_LEN);
+
+enum mlxsw_reg_mpagr_trigger {
+ MLXSW_REG_MPAGR_TRIGGER_EGRESS,
+ MLXSW_REG_MPAGR_TRIGGER_INGRESS,
+ MLXSW_REG_MPAGR_TRIGGER_INGRESS_WRED,
+ MLXSW_REG_MPAGR_TRIGGER_INGRESS_SHARED_BUFFER,
+ MLXSW_REG_MPAGR_TRIGGER_INGRESS_ING_CONG,
+ MLXSW_REG_MPAGR_TRIGGER_INGRESS_EGR_CONG,
+ MLXSW_REG_MPAGR_TRIGGER_EGRESS_ECN,
+ MLXSW_REG_MPAGR_TRIGGER_EGRESS_HIGH_LATENCY,
+};
+
+/* reg_mpagr_trigger
+ * Mirror trigger.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mpagr, trigger, 0x00, 0, 4);
+
+/* reg_mpagr_pa_id
+ * Port analyzer ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpagr, pa_id, 0x04, 0, 4);
+
+/* reg_mpagr_probability_rate
+ * Sampling rate.
+ * Valid values are: 1 to 3.5*10^9
+ * Value of 1 means "sample all". Default is 1.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpagr, probability_rate, 0x08, 0, 32);
+
+static inline void mlxsw_reg_mpagr_pack(char *payload,
+ enum mlxsw_reg_mpagr_trigger trigger,
+ u8 pa_id, u32 probability_rate)
+{
+ MLXSW_REG_ZERO(mpagr, payload);
+ mlxsw_reg_mpagr_trigger_set(payload, trigger);
+ mlxsw_reg_mpagr_pa_id_set(payload, pa_id);
+ mlxsw_reg_mpagr_probability_rate_set(payload, probability_rate);
+}
+
+/* MOMTE - Monitoring Mirror Trigger Enable Register
+ * -------------------------------------------------
+ * This register is used to configure the mirror enable for different mirror
+ * reasons.
+ */
+#define MLXSW_REG_MOMTE_ID 0x908D
+#define MLXSW_REG_MOMTE_LEN 0x10
+
+MLXSW_REG_DEFINE(momte, MLXSW_REG_MOMTE_ID, MLXSW_REG_MOMTE_LEN);
+
+/* reg_momte_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, momte, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_momte_type {
+ MLXSW_REG_MOMTE_TYPE_WRED = 0x20,
+ MLXSW_REG_MOMTE_TYPE_SHARED_BUFFER_TCLASS = 0x31,
+ MLXSW_REG_MOMTE_TYPE_SHARED_BUFFER_TCLASS_DESCRIPTORS = 0x32,
+ MLXSW_REG_MOMTE_TYPE_SHARED_BUFFER_EGRESS_PORT = 0x33,
+ MLXSW_REG_MOMTE_TYPE_ING_CONG = 0x40,
+ MLXSW_REG_MOMTE_TYPE_EGR_CONG = 0x50,
+ MLXSW_REG_MOMTE_TYPE_ECN = 0x60,
+ MLXSW_REG_MOMTE_TYPE_HIGH_LATENCY = 0x70,
+};
+
+/* reg_momte_type
+ * Type of mirroring.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, momte, type, 0x04, 0, 8);
+
+/* reg_momte_tclass_en
+ * TClass/PG mirror enable. Each bit represents corresponding tclass.
+ * 0: disable (default)
+ * 1: enable
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, momte, tclass_en, 0x08, 0x08, 1);
+
+static inline void mlxsw_reg_momte_pack(char *payload, u8 local_port,
+ enum mlxsw_reg_momte_type type)
+{
+ MLXSW_REG_ZERO(momte, payload);
+ mlxsw_reg_momte_local_port_set(payload, local_port);
+ mlxsw_reg_momte_type_set(payload, type);
+}
+
+/* MTPPPC - Time Precision Packet Port Configuration
+ * -------------------------------------------------
+ * This register serves for configuration of which PTP messages should be
+ * timestamped. This is a global configuration, despite the register name.
+ *
+ * Reserved when Spectrum-2.
+ */
+#define MLXSW_REG_MTPPPC_ID 0x9090
+#define MLXSW_REG_MTPPPC_LEN 0x28
+
+MLXSW_REG_DEFINE(mtpppc, MLXSW_REG_MTPPPC_ID, MLXSW_REG_MTPPPC_LEN);
+
+/* reg_mtpppc_ing_timestamp_message_type
+ * Bitwise vector of PTP message types to timestamp at ingress.
+ * MessageType field as defined by IEEE 1588
+ * Each bit corresponds to a value (e.g. Bit0: Sync, Bit1: Delay_Req)
+ * Default all 0
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtpppc, ing_timestamp_message_type, 0x08, 0, 16);
+
+/* reg_mtpppc_egr_timestamp_message_type
+ * Bitwise vector of PTP message types to timestamp at egress.
+ * MessageType field as defined by IEEE 1588
+ * Each bit corresponds to a value (e.g. Bit0: Sync, Bit1: Delay_Req)
+ * Default all 0
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtpppc, egr_timestamp_message_type, 0x0C, 0, 16);
+
+static inline void mlxsw_reg_mtpppc_pack(char *payload, u16 ing, u16 egr)
+{
+ MLXSW_REG_ZERO(mtpppc, payload);
+ mlxsw_reg_mtpppc_ing_timestamp_message_type_set(payload, ing);
+ mlxsw_reg_mtpppc_egr_timestamp_message_type_set(payload, egr);
+}
+
+/* MTPPTR - Time Precision Packet Timestamping Reading
+ * ---------------------------------------------------
+ * The MTPPTR is used for reading the per port PTP timestamp FIFO.
+ * There is a trap for packets which are latched to the timestamp FIFO, thus the
+ * SW knows which FIFO to read. Note that packets enter the FIFO before been
+ * trapped. The sequence number is used to synchronize the timestamp FIFO
+ * entries and the trapped packets.
+ * Reserved when Spectrum-2.
+ */
+
+#define MLXSW_REG_MTPPTR_ID 0x9091
+#define MLXSW_REG_MTPPTR_BASE_LEN 0x10 /* base length, without records */
+#define MLXSW_REG_MTPPTR_REC_LEN 0x10 /* record length */
+#define MLXSW_REG_MTPPTR_REC_MAX_COUNT 4
+#define MLXSW_REG_MTPPTR_LEN (MLXSW_REG_MTPPTR_BASE_LEN + \
+ MLXSW_REG_MTPPTR_REC_LEN * MLXSW_REG_MTPPTR_REC_MAX_COUNT)
+
+MLXSW_REG_DEFINE(mtpptr, MLXSW_REG_MTPPTR_ID, MLXSW_REG_MTPPTR_LEN);
+
+/* reg_mtpptr_local_port
+ * Not supported for CPU port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtpptr, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_mtpptr_dir {
+ MLXSW_REG_MTPPTR_DIR_INGRESS,
+ MLXSW_REG_MTPPTR_DIR_EGRESS,
+};
+
+/* reg_mtpptr_dir
+ * Direction.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtpptr, dir, 0x00, 0, 1);
+
+/* reg_mtpptr_clr
+ * Clear the records.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, mtpptr, clr, 0x04, 31, 1);
+
+/* reg_mtpptr_num_rec
+ * Number of valid records in the response
+ * Range 0.. cap_ptp_timestamp_fifo
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mtpptr, num_rec, 0x08, 0, 4);
+
+/* reg_mtpptr_rec_message_type
+ * MessageType field as defined by IEEE 1588 Each bit corresponds to a value
+ * (e.g. Bit0: Sync, Bit1: Delay_Req)
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtpptr, rec_message_type,
+ MLXSW_REG_MTPPTR_BASE_LEN, 8, 4,
+ MLXSW_REG_MTPPTR_REC_LEN, 0, false);
+
+/* reg_mtpptr_rec_domain_number
+ * DomainNumber field as defined by IEEE 1588
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtpptr, rec_domain_number,
+ MLXSW_REG_MTPPTR_BASE_LEN, 0, 8,
+ MLXSW_REG_MTPPTR_REC_LEN, 0, false);
+
+/* reg_mtpptr_rec_sequence_id
+ * SequenceId field as defined by IEEE 1588
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtpptr, rec_sequence_id,
+ MLXSW_REG_MTPPTR_BASE_LEN, 0, 16,
+ MLXSW_REG_MTPPTR_REC_LEN, 0x4, false);
+
+/* reg_mtpptr_rec_timestamp_high
+ * Timestamp of when the PTP packet has passed through the port Units of PLL
+ * clock time.
+ * For Spectrum-1 the PLL clock is 156.25Mhz and PLL clock time is 6.4nSec.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtpptr, rec_timestamp_high,
+ MLXSW_REG_MTPPTR_BASE_LEN, 0, 32,
+ MLXSW_REG_MTPPTR_REC_LEN, 0x8, false);
+
+/* reg_mtpptr_rec_timestamp_low
+ * See rec_timestamp_high.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtpptr, rec_timestamp_low,
+ MLXSW_REG_MTPPTR_BASE_LEN, 0, 32,
+ MLXSW_REG_MTPPTR_REC_LEN, 0xC, false);
+
+static inline void mlxsw_reg_mtpptr_unpack(const char *payload,
+ unsigned int rec,
+ u8 *p_message_type,
+ u8 *p_domain_number,
+ u16 *p_sequence_id,
+ u64 *p_timestamp)
+{
+ u32 timestamp_high, timestamp_low;
+
+ *p_message_type = mlxsw_reg_mtpptr_rec_message_type_get(payload, rec);
+ *p_domain_number = mlxsw_reg_mtpptr_rec_domain_number_get(payload, rec);
+ *p_sequence_id = mlxsw_reg_mtpptr_rec_sequence_id_get(payload, rec);
+ timestamp_high = mlxsw_reg_mtpptr_rec_timestamp_high_get(payload, rec);
+ timestamp_low = mlxsw_reg_mtpptr_rec_timestamp_low_get(payload, rec);
+ *p_timestamp = (u64)timestamp_high << 32 | timestamp_low;
+}
+
+/* MTPTPT - Monitoring Precision Time Protocol Trap Register
+ * ---------------------------------------------------------
+ * This register is used for configuring under which trap to deliver PTP
+ * packets depending on type of the packet.
+ */
+#define MLXSW_REG_MTPTPT_ID 0x9092
+#define MLXSW_REG_MTPTPT_LEN 0x08
+
+MLXSW_REG_DEFINE(mtptpt, MLXSW_REG_MTPTPT_ID, MLXSW_REG_MTPTPT_LEN);
+
+enum mlxsw_reg_mtptpt_trap_id {
+ MLXSW_REG_MTPTPT_TRAP_ID_PTP0,
+ MLXSW_REG_MTPTPT_TRAP_ID_PTP1,
+};
+
+/* reg_mtptpt_trap_id
+ * Trap id.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtptpt, trap_id, 0x00, 0, 4);
+
+/* reg_mtptpt_message_type
+ * Bitwise vector of PTP message types to trap. This is a necessary but
+ * non-sufficient condition since need to enable also per port. See MTPPPC.
+ * Message types are defined by IEEE 1588 Each bit corresponds to a value (e.g.
+ * Bit0: Sync, Bit1: Delay_Req)
+ */
+MLXSW_ITEM32(reg, mtptpt, message_type, 0x04, 0, 16);
+
+static inline void mlxsw_reg_mtptptp_pack(char *payload,
+ enum mlxsw_reg_mtptpt_trap_id trap_id,
+ u16 message_type)
+{
+ MLXSW_REG_ZERO(mtptpt, payload);
+ mlxsw_reg_mtptpt_trap_id_set(payload, trap_id);
+ mlxsw_reg_mtptpt_message_type_set(payload, message_type);
+}
+
+/* MFGD - Monitoring FW General Debug Register
+ * -------------------------------------------
+ */
+#define MLXSW_REG_MFGD_ID 0x90F0
+#define MLXSW_REG_MFGD_LEN 0x0C
+
+MLXSW_REG_DEFINE(mfgd, MLXSW_REG_MFGD_ID, MLXSW_REG_MFGD_LEN);
+
+/* reg_mfgd_fw_fatal_event_mode
+ * 0 - don't check FW fatal (default)
+ * 1 - check FW fatal - enable MFDE trap
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mfgd, fatal_event_mode, 0x00, 9, 2);
+
+/* reg_mfgd_trigger_test
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, mfgd, trigger_test, 0x00, 11, 1);
+
+/* MGPIR - Management General Peripheral Information Register
+ * ----------------------------------------------------------
+ * MGPIR register allows software to query the hardware and
+ * firmware general information of peripheral entities.
+ */
+#define MLXSW_REG_MGPIR_ID 0x9100
+#define MLXSW_REG_MGPIR_LEN 0xA0
+
+MLXSW_REG_DEFINE(mgpir, MLXSW_REG_MGPIR_ID, MLXSW_REG_MGPIR_LEN);
+
+enum mlxsw_reg_mgpir_device_type {
+ MLXSW_REG_MGPIR_DEVICE_TYPE_NONE,
+ MLXSW_REG_MGPIR_DEVICE_TYPE_GEARBOX_DIE,
+};
+
+/* device_type
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgpir, device_type, 0x00, 24, 4);
+
+/* devices_per_flash
+ * Number of devices of device_type per flash (can be shared by few devices).
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgpir, devices_per_flash, 0x00, 16, 8);
+
+/* num_of_devices
+ * Number of devices of device_type.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgpir, num_of_devices, 0x00, 0, 8);
+
+/* num_of_modules
+ * Number of modules.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mgpir, num_of_modules, 0x04, 0, 8);
+
+static inline void mlxsw_reg_mgpir_pack(char *payload)
+{
+ MLXSW_REG_ZERO(mgpir, payload);
+}
+
+static inline void
+mlxsw_reg_mgpir_unpack(char *payload, u8 *num_of_devices,
+ enum mlxsw_reg_mgpir_device_type *device_type,
+ u8 *devices_per_flash, u8 *num_of_modules)
+{
+ if (num_of_devices)
+ *num_of_devices = mlxsw_reg_mgpir_num_of_devices_get(payload);
+ if (device_type)
+ *device_type = mlxsw_reg_mgpir_device_type_get(payload);
+ if (devices_per_flash)
+ *devices_per_flash =
+ mlxsw_reg_mgpir_devices_per_flash_get(payload);
+ if (num_of_modules)
+ *num_of_modules = mlxsw_reg_mgpir_num_of_modules_get(payload);
+}
+
+/* MFDE - Monitoring FW Debug Register
+ * -----------------------------------
+ */
+#define MLXSW_REG_MFDE_ID 0x9200
+#define MLXSW_REG_MFDE_LEN 0x18
+
+MLXSW_REG_DEFINE(mfde, MLXSW_REG_MFDE_ID, MLXSW_REG_MFDE_LEN);
+
+/* reg_mfde_irisc_id
+ * Which irisc triggered the event
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, irisc_id, 0x00, 8, 4);
+
+enum mlxsw_reg_mfde_event_id {
+ MLXSW_REG_MFDE_EVENT_ID_CRSPACE_TO = 1,
+ /* KVD insertion machine stopped */
+ MLXSW_REG_MFDE_EVENT_ID_KVD_IM_STOP,
+};
+
+/* reg_mfde_event_id
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, event_id, 0x00, 0, 8);
+
+enum mlxsw_reg_mfde_method {
+ MLXSW_REG_MFDE_METHOD_QUERY,
+ MLXSW_REG_MFDE_METHOD_WRITE,
+};
+
+/* reg_mfde_method
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, method, 0x04, 29, 1);
+
+/* reg_mfde_long_process
+ * Indicates if the command is in long_process mode.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, long_process, 0x04, 28, 1);
+
+enum mlxsw_reg_mfde_command_type {
+ MLXSW_REG_MFDE_COMMAND_TYPE_MAD,
+ MLXSW_REG_MFDE_COMMAND_TYPE_EMAD,
+ MLXSW_REG_MFDE_COMMAND_TYPE_CMDIF,
+};
+
+/* reg_mfde_command_type
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, command_type, 0x04, 24, 2);
+
+/* reg_mfde_reg_attr_id
+ * EMAD - register id, MAD - attibute id
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, reg_attr_id, 0x04, 0, 16);
+
+/* reg_mfde_log_address
+ * crspace address accessed, which resulted in timeout.
+ * Valid in case event_id == MLXSW_REG_MFDE_EVENT_ID_CRSPACE_TO
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, log_address, 0x10, 0, 32);
+
+/* reg_mfde_log_id
+ * Which irisc triggered the timeout.
+ * Valid in case event_id == MLXSW_REG_MFDE_EVENT_ID_CRSPACE_TO
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, log_id, 0x14, 0, 4);
+
+/* reg_mfde_pipes_mask
+ * Bit per kvh pipe.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mfde, pipes_mask, 0x10, 0, 16);
+
+/* TNGCR - Tunneling NVE General Configuration Register
+ * ----------------------------------------------------
+ * The TNGCR register is used for setting up the NVE Tunneling configuration.
+ */
+#define MLXSW_REG_TNGCR_ID 0xA001
+#define MLXSW_REG_TNGCR_LEN 0x44
+
+MLXSW_REG_DEFINE(tngcr, MLXSW_REG_TNGCR_ID, MLXSW_REG_TNGCR_LEN);
+
+enum mlxsw_reg_tngcr_type {
+ MLXSW_REG_TNGCR_TYPE_VXLAN,
+ MLXSW_REG_TNGCR_TYPE_VXLAN_GPE,
+ MLXSW_REG_TNGCR_TYPE_GENEVE,
+ MLXSW_REG_TNGCR_TYPE_NVGRE,
+};
+
+/* reg_tngcr_type
+ * Tunnel type for encapsulation and decapsulation. The types are mutually
+ * exclusive.
+ * Note: For Spectrum the NVE parsing must be enabled in MPRS.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, type, 0x00, 0, 4);
+
+/* reg_tngcr_nve_valid
+ * The VTEP is valid. Allows adding FDB entries for tunnel encapsulation.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_valid, 0x04, 31, 1);
+
+/* reg_tngcr_nve_ttl_uc
+ * The TTL for NVE tunnel encapsulation underlay unicast packets.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_ttl_uc, 0x04, 0, 8);
+
+/* reg_tngcr_nve_ttl_mc
+ * The TTL for NVE tunnel encapsulation underlay multicast packets.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_ttl_mc, 0x08, 0, 8);
+
+enum {
+ /* Do not copy flow label. Calculate flow label using nve_flh. */
+ MLXSW_REG_TNGCR_FL_NO_COPY,
+ /* Copy flow label from inner packet if packet is IPv6 and
+ * encapsulation is by IPv6. Otherwise, calculate flow label using
+ * nve_flh.
+ */
+ MLXSW_REG_TNGCR_FL_COPY,
+};
+
+/* reg_tngcr_nve_flc
+ * For NVE tunnel encapsulation: Flow label copy from inner packet.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_flc, 0x0C, 25, 1);
+
+enum {
+ /* Flow label is static. In Spectrum this means '0'. Spectrum-2
+ * uses {nve_fl_prefix, nve_fl_suffix}.
+ */
+ MLXSW_REG_TNGCR_FL_NO_HASH,
+ /* 8 LSBs of the flow label are calculated from ECMP hash of the
+ * inner packet. 12 MSBs are configured by nve_fl_prefix.
+ */
+ MLXSW_REG_TNGCR_FL_HASH,
+};
+
+/* reg_tngcr_nve_flh
+ * NVE flow label hash.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_flh, 0x0C, 24, 1);
+
+/* reg_tngcr_nve_fl_prefix
+ * NVE flow label prefix. Constant 12 MSBs of the flow label.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_fl_prefix, 0x0C, 8, 12);
+
+/* reg_tngcr_nve_fl_suffix
+ * NVE flow label suffix. Constant 8 LSBs of the flow label.
+ * Reserved when nve_flh=1 and for Spectrum.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_fl_suffix, 0x0C, 0, 8);
+
+enum {
+ /* Source UDP port is fixed (default '0') */
+ MLXSW_REG_TNGCR_UDP_SPORT_NO_HASH,
+ /* Source UDP port is calculated based on hash */
+ MLXSW_REG_TNGCR_UDP_SPORT_HASH,
+};
+
+/* reg_tngcr_nve_udp_sport_type
+ * NVE UDP source port type.
+ * Spectrum uses LAG hash (SLCRv2). Spectrum-2 uses ECMP hash (RECRv2).
+ * When the source UDP port is calculated based on hash, then the 8 LSBs
+ * are calculated from hash the 8 MSBs are configured by
+ * nve_udp_sport_prefix.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_udp_sport_type, 0x10, 24, 1);
+
+/* reg_tngcr_nve_udp_sport_prefix
+ * NVE UDP source port prefix. Constant 8 MSBs of the UDP source port.
+ * Reserved when NVE type is NVGRE.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_udp_sport_prefix, 0x10, 8, 8);
+
+/* reg_tngcr_nve_group_size_mc
+ * The amount of sequential linked lists of MC entries. The first linked
+ * list is configured by SFD.underlay_mc_ptr.
+ * Valid values: 1, 2, 4, 8, 16, 32, 64
+ * The linked list are configured by TNUMT.
+ * The hash is set by LAG hash.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_group_size_mc, 0x18, 0, 8);
+
+/* reg_tngcr_nve_group_size_flood
+ * The amount of sequential linked lists of flooding entries. The first
+ * linked list is configured by SFMR.nve_tunnel_flood_ptr
+ * Valid values: 1, 2, 4, 8, 16, 32, 64
+ * The linked list are configured by TNUMT.
+ * The hash is set by LAG hash.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, nve_group_size_flood, 0x1C, 0, 8);
+
+/* reg_tngcr_learn_enable
+ * During decapsulation, whether to learn from NVE port.
+ * Reserved when Spectrum-2. See TNPC.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, learn_enable, 0x20, 31, 1);
+
+/* reg_tngcr_underlay_virtual_router
+ * Underlay virtual router.
+ * Reserved when Spectrum-2.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, underlay_virtual_router, 0x20, 0, 16);
+
+/* reg_tngcr_underlay_rif
+ * Underlay ingress router interface. RIF type should be loopback generic.
+ * Reserved when Spectrum.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, underlay_rif, 0x24, 0, 16);
+
+/* reg_tngcr_usipv4
+ * Underlay source IPv4 address of the NVE.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tngcr, usipv4, 0x28, 0, 32);
+
+/* reg_tngcr_usipv6
+ * Underlay source IPv6 address of the NVE. For Spectrum, must not be
+ * modified under traffic of NVE tunneling encapsulation.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, tngcr, usipv6, 0x30, 16);
+
+static inline void mlxsw_reg_tngcr_pack(char *payload,
+ enum mlxsw_reg_tngcr_type type,
+ bool valid, u8 ttl)
+{
+ MLXSW_REG_ZERO(tngcr, payload);
+ mlxsw_reg_tngcr_type_set(payload, type);
+ mlxsw_reg_tngcr_nve_valid_set(payload, valid);
+ mlxsw_reg_tngcr_nve_ttl_uc_set(payload, ttl);
+ mlxsw_reg_tngcr_nve_ttl_mc_set(payload, ttl);
+ mlxsw_reg_tngcr_nve_flc_set(payload, MLXSW_REG_TNGCR_FL_NO_COPY);
+ mlxsw_reg_tngcr_nve_flh_set(payload, 0);
+ mlxsw_reg_tngcr_nve_udp_sport_type_set(payload,
+ MLXSW_REG_TNGCR_UDP_SPORT_HASH);
+ mlxsw_reg_tngcr_nve_udp_sport_prefix_set(payload, 0);
+ mlxsw_reg_tngcr_nve_group_size_mc_set(payload, 1);
+ mlxsw_reg_tngcr_nve_group_size_flood_set(payload, 1);
+}
+
+/* TNUMT - Tunneling NVE Underlay Multicast Table Register
+ * -------------------------------------------------------
+ * The TNUMT register is for building the underlay MC table. It is used
+ * for MC, flooding and BC traffic into the NVE tunnel.
+ */
+#define MLXSW_REG_TNUMT_ID 0xA003
+#define MLXSW_REG_TNUMT_LEN 0x20
+
+MLXSW_REG_DEFINE(tnumt, MLXSW_REG_TNUMT_ID, MLXSW_REG_TNUMT_LEN);
+
+enum mlxsw_reg_tnumt_record_type {
+ MLXSW_REG_TNUMT_RECORD_TYPE_IPV4,
+ MLXSW_REG_TNUMT_RECORD_TYPE_IPV6,
+ MLXSW_REG_TNUMT_RECORD_TYPE_LABEL,
+};
+
+/* reg_tnumt_record_type
+ * Record type.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnumt, record_type, 0x00, 28, 4);
+
+enum mlxsw_reg_tnumt_tunnel_port {
+ MLXSW_REG_TNUMT_TUNNEL_PORT_NVE,
+ MLXSW_REG_TNUMT_TUNNEL_PORT_VPLS,
+ MLXSW_REG_TNUMT_TUNNEL_FLEX_TUNNEL0,
+ MLXSW_REG_TNUMT_TUNNEL_FLEX_TUNNEL1,
+};
+
+/* reg_tnumt_tunnel_port
+ * Tunnel port.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnumt, tunnel_port, 0x00, 24, 4);
+
+/* reg_tnumt_underlay_mc_ptr
+ * Index to the underlay multicast table.
+ * For Spectrum the index is to the KVD linear.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tnumt, underlay_mc_ptr, 0x00, 0, 24);
+
+/* reg_tnumt_vnext
+ * The next_underlay_mc_ptr is valid.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnumt, vnext, 0x04, 31, 1);
+
+/* reg_tnumt_next_underlay_mc_ptr
+ * The next index to the underlay multicast table.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnumt, next_underlay_mc_ptr, 0x04, 0, 24);
+
+/* reg_tnumt_record_size
+ * Number of IP addresses in the record.
+ * Range is 1..cap_max_nve_mc_entries_ipv{4,6}
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnumt, record_size, 0x08, 0, 3);
+
+/* reg_tnumt_udip
+ * The underlay IPv4 addresses. udip[i] is reserved if i >= size
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, tnumt, udip, 0x0C, 0, 32, 0x04, 0x00, false);
+
+/* reg_tnumt_udip_ptr
+ * The pointer to the underlay IPv6 addresses. udip_ptr[i] is reserved if
+ * i >= size. The IPv6 addresses are configured by RIPS.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, tnumt, udip_ptr, 0x0C, 0, 24, 0x04, 0x00, false);
+
+static inline void mlxsw_reg_tnumt_pack(char *payload,
+ enum mlxsw_reg_tnumt_record_type type,
+ enum mlxsw_reg_tnumt_tunnel_port tport,
+ u32 underlay_mc_ptr, bool vnext,
+ u32 next_underlay_mc_ptr,
+ u8 record_size)
+{
+ MLXSW_REG_ZERO(tnumt, payload);
+ mlxsw_reg_tnumt_record_type_set(payload, type);
+ mlxsw_reg_tnumt_tunnel_port_set(payload, tport);
+ mlxsw_reg_tnumt_underlay_mc_ptr_set(payload, underlay_mc_ptr);
+ mlxsw_reg_tnumt_vnext_set(payload, vnext);
+ mlxsw_reg_tnumt_next_underlay_mc_ptr_set(payload, next_underlay_mc_ptr);
+ mlxsw_reg_tnumt_record_size_set(payload, record_size);
+}
+
+/* TNQCR - Tunneling NVE QoS Configuration Register
+ * ------------------------------------------------
+ * The TNQCR register configures how QoS is set in encapsulation into the
+ * underlay network.
+ */
+#define MLXSW_REG_TNQCR_ID 0xA010
+#define MLXSW_REG_TNQCR_LEN 0x0C
+
+MLXSW_REG_DEFINE(tnqcr, MLXSW_REG_TNQCR_ID, MLXSW_REG_TNQCR_LEN);
+
+/* reg_tnqcr_enc_set_dscp
+ * For encapsulation: How to set DSCP field:
+ * 0 - Copy the DSCP from the overlay (inner) IP header to the underlay
+ * (outer) IP header. If there is no IP header, use TNQDR.dscp
+ * 1 - Set the DSCP field as TNQDR.dscp
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnqcr, enc_set_dscp, 0x04, 28, 1);
+
+static inline void mlxsw_reg_tnqcr_pack(char *payload)
+{
+ MLXSW_REG_ZERO(tnqcr, payload);
+ mlxsw_reg_tnqcr_enc_set_dscp_set(payload, 0);
+}
+
+/* TNQDR - Tunneling NVE QoS Default Register
+ * ------------------------------------------
+ * The TNQDR register configures the default QoS settings for NVE
+ * encapsulation.
+ */
+#define MLXSW_REG_TNQDR_ID 0xA011
+#define MLXSW_REG_TNQDR_LEN 0x08
+
+MLXSW_REG_DEFINE(tnqdr, MLXSW_REG_TNQDR_ID, MLXSW_REG_TNQDR_LEN);
+
+/* reg_tnqdr_local_port
+ * Local port number (receive port). CPU port is supported.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tnqdr, local_port, 0x00, 16, 8);
+
+/* reg_tnqdr_dscp
+ * For encapsulation, the default DSCP.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnqdr, dscp, 0x04, 0, 6);
+
+static inline void mlxsw_reg_tnqdr_pack(char *payload, u8 local_port)
+{
+ MLXSW_REG_ZERO(tnqdr, payload);
+ mlxsw_reg_tnqdr_local_port_set(payload, local_port);
+ mlxsw_reg_tnqdr_dscp_set(payload, 0);
+}
+
+/* TNEEM - Tunneling NVE Encapsulation ECN Mapping Register
+ * --------------------------------------------------------
+ * The TNEEM register maps ECN of the IP header at the ingress to the
+ * encapsulation to the ECN of the underlay network.
+ */
+#define MLXSW_REG_TNEEM_ID 0xA012
+#define MLXSW_REG_TNEEM_LEN 0x0C
+
+MLXSW_REG_DEFINE(tneem, MLXSW_REG_TNEEM_ID, MLXSW_REG_TNEEM_LEN);
+
+/* reg_tneem_overlay_ecn
+ * ECN of the IP header in the overlay network.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tneem, overlay_ecn, 0x04, 24, 2);
+
+/* reg_tneem_underlay_ecn
+ * ECN of the IP header in the underlay network.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tneem, underlay_ecn, 0x04, 16, 2);
+
+static inline void mlxsw_reg_tneem_pack(char *payload, u8 overlay_ecn,
+ u8 underlay_ecn)
+{
+ MLXSW_REG_ZERO(tneem, payload);
+ mlxsw_reg_tneem_overlay_ecn_set(payload, overlay_ecn);
+ mlxsw_reg_tneem_underlay_ecn_set(payload, underlay_ecn);
+}
+
+/* TNDEM - Tunneling NVE Decapsulation ECN Mapping Register
+ * --------------------------------------------------------
+ * The TNDEM register configures the actions that are done in the
+ * decapsulation.
+ */
+#define MLXSW_REG_TNDEM_ID 0xA013
+#define MLXSW_REG_TNDEM_LEN 0x0C
+
+MLXSW_REG_DEFINE(tndem, MLXSW_REG_TNDEM_ID, MLXSW_REG_TNDEM_LEN);
+
+/* reg_tndem_underlay_ecn
+ * ECN field of the IP header in the underlay network.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tndem, underlay_ecn, 0x04, 24, 2);
+
+/* reg_tndem_overlay_ecn
+ * ECN field of the IP header in the overlay network.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tndem, overlay_ecn, 0x04, 16, 2);
+
+/* reg_tndem_eip_ecn
+ * Egress IP ECN. ECN field of the IP header of the packet which goes out
+ * from the decapsulation.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tndem, eip_ecn, 0x04, 8, 2);
+
+/* reg_tndem_trap_en
+ * Trap enable:
+ * 0 - No trap due to decap ECN
+ * 1 - Trap enable with trap_id
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tndem, trap_en, 0x08, 28, 4);
+
+/* reg_tndem_trap_id
+ * Trap ID. Either DECAP_ECN0 or DECAP_ECN1.
+ * Reserved when trap_en is '0'.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tndem, trap_id, 0x08, 0, 9);
+
+static inline void mlxsw_reg_tndem_pack(char *payload, u8 underlay_ecn,
+ u8 overlay_ecn, u8 ecn, bool trap_en,
+ u16 trap_id)
+{
+ MLXSW_REG_ZERO(tndem, payload);
+ mlxsw_reg_tndem_underlay_ecn_set(payload, underlay_ecn);
+ mlxsw_reg_tndem_overlay_ecn_set(payload, overlay_ecn);
+ mlxsw_reg_tndem_eip_ecn_set(payload, ecn);
+ mlxsw_reg_tndem_trap_en_set(payload, trap_en);
+ mlxsw_reg_tndem_trap_id_set(payload, trap_id);
+}
+
+/* TNPC - Tunnel Port Configuration Register
+ * -----------------------------------------
+ * The TNPC register is used for tunnel port configuration.
+ * Reserved when Spectrum.
+ */
+#define MLXSW_REG_TNPC_ID 0xA020
+#define MLXSW_REG_TNPC_LEN 0x18
+
+MLXSW_REG_DEFINE(tnpc, MLXSW_REG_TNPC_ID, MLXSW_REG_TNPC_LEN);
+
+enum mlxsw_reg_tnpc_tunnel_port {
+ MLXSW_REG_TNPC_TUNNEL_PORT_NVE,
+ MLXSW_REG_TNPC_TUNNEL_PORT_VPLS,
+ MLXSW_REG_TNPC_TUNNEL_FLEX_TUNNEL0,
+ MLXSW_REG_TNPC_TUNNEL_FLEX_TUNNEL1,
+};
+
+/* reg_tnpc_tunnel_port
+ * Tunnel port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tnpc, tunnel_port, 0x00, 0, 4);
+
+/* reg_tnpc_learn_enable_v6
+ * During IPv6 underlay decapsulation, whether to learn from tunnel port.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnpc, learn_enable_v6, 0x04, 1, 1);
+
+/* reg_tnpc_learn_enable_v4
+ * During IPv4 underlay decapsulation, whether to learn from tunnel port.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tnpc, learn_enable_v4, 0x04, 0, 1);
+
+static inline void mlxsw_reg_tnpc_pack(char *payload,
+ enum mlxsw_reg_tnpc_tunnel_port tport,
+ bool learn_enable)
+{
+ MLXSW_REG_ZERO(tnpc, payload);
+ mlxsw_reg_tnpc_tunnel_port_set(payload, tport);
+ mlxsw_reg_tnpc_learn_enable_v4_set(payload, learn_enable);
+ mlxsw_reg_tnpc_learn_enable_v6_set(payload, learn_enable);
+}
+
/* TIGCR - Tunneling IPinIP General Configuration Register
* -------------------------------------------------------
* The TIGCR register is used for setting up the IPinIP Tunnel configuration.
@@ -8329,6 +10598,92 @@
mlxsw_reg_tigcr_ttl_uc_set(payload, ttl_uc);
}
+/* TIEEM - Tunneling IPinIP Encapsulation ECN Mapping Register
+ * -----------------------------------------------------------
+ * The TIEEM register maps ECN of the IP header at the ingress to the
+ * encapsulation to the ECN of the underlay network.
+ */
+#define MLXSW_REG_TIEEM_ID 0xA812
+#define MLXSW_REG_TIEEM_LEN 0x0C
+
+MLXSW_REG_DEFINE(tieem, MLXSW_REG_TIEEM_ID, MLXSW_REG_TIEEM_LEN);
+
+/* reg_tieem_overlay_ecn
+ * ECN of the IP header in the overlay network.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tieem, overlay_ecn, 0x04, 24, 2);
+
+/* reg_tineem_underlay_ecn
+ * ECN of the IP header in the underlay network.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tieem, underlay_ecn, 0x04, 16, 2);
+
+static inline void mlxsw_reg_tieem_pack(char *payload, u8 overlay_ecn,
+ u8 underlay_ecn)
+{
+ MLXSW_REG_ZERO(tieem, payload);
+ mlxsw_reg_tieem_overlay_ecn_set(payload, overlay_ecn);
+ mlxsw_reg_tieem_underlay_ecn_set(payload, underlay_ecn);
+}
+
+/* TIDEM - Tunneling IPinIP Decapsulation ECN Mapping Register
+ * -----------------------------------------------------------
+ * The TIDEM register configures the actions that are done in the
+ * decapsulation.
+ */
+#define MLXSW_REG_TIDEM_ID 0xA813
+#define MLXSW_REG_TIDEM_LEN 0x0C
+
+MLXSW_REG_DEFINE(tidem, MLXSW_REG_TIDEM_ID, MLXSW_REG_TIDEM_LEN);
+
+/* reg_tidem_underlay_ecn
+ * ECN field of the IP header in the underlay network.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tidem, underlay_ecn, 0x04, 24, 2);
+
+/* reg_tidem_overlay_ecn
+ * ECN field of the IP header in the overlay network.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, tidem, overlay_ecn, 0x04, 16, 2);
+
+/* reg_tidem_eip_ecn
+ * Egress IP ECN. ECN field of the IP header of the packet which goes out
+ * from the decapsulation.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tidem, eip_ecn, 0x04, 8, 2);
+
+/* reg_tidem_trap_en
+ * Trap enable:
+ * 0 - No trap due to decap ECN
+ * 1 - Trap enable with trap_id
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tidem, trap_en, 0x08, 28, 4);
+
+/* reg_tidem_trap_id
+ * Trap ID. Either DECAP_ECN0 or DECAP_ECN1.
+ * Reserved when trap_en is '0'.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, tidem, trap_id, 0x08, 0, 9);
+
+static inline void mlxsw_reg_tidem_pack(char *payload, u8 underlay_ecn,
+ u8 overlay_ecn, u8 eip_ecn,
+ bool trap_en, u16 trap_id)
+{
+ MLXSW_REG_ZERO(tidem, payload);
+ mlxsw_reg_tidem_underlay_ecn_set(payload, underlay_ecn);
+ mlxsw_reg_tidem_overlay_ecn_set(payload, overlay_ecn);
+ mlxsw_reg_tidem_eip_ecn_set(payload, eip_ecn);
+ mlxsw_reg_tidem_trap_en_set(payload, trap_en);
+ mlxsw_reg_tidem_trap_id_set(payload, trap_id);
+}
+
/* SBPR - Shared Buffer Pools Register
* -----------------------------------
* The SBPR configures and retrieves the shared buffer pools and configuration.
@@ -8356,8 +10711,15 @@
*/
MLXSW_ITEM32(reg, sbpr, pool, 0x00, 0, 4);
+/* reg_sbpr_infi_size
+ * Size is infinite.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sbpr, infi_size, 0x04, 31, 1);
+
/* reg_sbpr_size
* Pool size in buffer cells.
+ * Reserved when infi_size = 1.
* Access: RW
*/
MLXSW_ITEM32(reg, sbpr, size, 0x04, 0, 24);
@@ -8375,13 +10737,15 @@
static inline void mlxsw_reg_sbpr_pack(char *payload, u8 pool,
enum mlxsw_reg_sbxx_dir dir,
- enum mlxsw_reg_sbpr_mode mode, u32 size)
+ enum mlxsw_reg_sbpr_mode mode, u32 size,
+ bool infi_size)
{
MLXSW_REG_ZERO(sbpr, payload);
mlxsw_reg_sbpr_pool_set(payload, pool);
mlxsw_reg_sbpr_dir_set(payload, dir);
mlxsw_reg_sbpr_mode_set(payload, mode);
mlxsw_reg_sbpr_size_set(payload, size);
+ mlxsw_reg_sbpr_infi_size_set(payload, infi_size);
}
/* SBCM - Shared Buffer Class Management Register
@@ -8429,6 +10793,12 @@
#define MLXSW_REG_SBXX_DYN_MAX_BUFF_MIN 1
#define MLXSW_REG_SBXX_DYN_MAX_BUFF_MAX 14
+/* reg_sbcm_infi_max
+ * Max buffer is infinite.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sbcm, infi_max, 0x1C, 31, 1);
+
/* reg_sbcm_max_buff
* When the pool associated to the port-pg/tclass is configured to
* static, Maximum buffer size for the limiter configured in cells.
@@ -8438,6 +10808,7 @@
* 0: 0
* i: (1/128)*2^(i-1), for i=1..14
* 0xFF: Infinity
+ * Reserved when infi_max = 1.
* Access: RW
*/
MLXSW_ITEM32(reg, sbcm, max_buff, 0x1C, 0, 24);
@@ -8450,7 +10821,8 @@
static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff,
enum mlxsw_reg_sbxx_dir dir,
- u32 min_buff, u32 max_buff, u8 pool)
+ u32 min_buff, u32 max_buff,
+ bool infi_max, u8 pool)
{
MLXSW_REG_ZERO(sbcm, payload);
mlxsw_reg_sbcm_local_port_set(payload, local_port);
@@ -8458,6 +10830,7 @@
mlxsw_reg_sbcm_dir_set(payload, dir);
mlxsw_reg_sbcm_min_buff_set(payload, min_buff);
mlxsw_reg_sbcm_max_buff_set(payload, max_buff);
+ mlxsw_reg_sbcm_infi_max_set(payload, infi_max);
mlxsw_reg_sbcm_pool_set(payload, pool);
}
@@ -8768,8 +11141,10 @@
MLXSW_REG(ppbs),
MLXSW_REG(prcr),
MLXSW_REG(pefa),
+ MLXSW_REG(pemrbt),
MLXSW_REG(ptce2),
MLXSW_REG(perpt),
+ MLXSW_REG(peabfe),
MLXSW_REG(perar),
MLXSW_REG(ptce3),
MLXSW_REG(percr),
@@ -8781,8 +11156,10 @@
MLXSW_REG(qeec),
MLXSW_REG(qrwe),
MLXSW_REG(qpdsm),
+ MLXSW_REG(qpdp),
MLXSW_REG(qpdpm),
MLXSW_REG(qtctm),
+ MLXSW_REG(qpsc),
MLXSW_REG(pmlp),
MLXSW_REG(pmtu),
MLXSW_REG(ptys),
@@ -8794,6 +11171,11 @@
MLXSW_REG(pptb),
MLXSW_REG(pbmc),
MLXSW_REG(pspa),
+ MLXSW_REG(pmaos),
+ MLXSW_REG(pplr),
+ MLXSW_REG(pmpe),
+ MLXSW_REG(pddr),
+ MLXSW_REG(pmtm),
MLXSW_REG(htgt),
MLXSW_REG(hpkt),
MLXSW_REG(rgcr),
@@ -8818,19 +11200,44 @@
MLXSW_REG(mfsc),
MLXSW_REG(mfsm),
MLXSW_REG(mfsl),
+ MLXSW_REG(fore),
MLXSW_REG(mtcap),
MLXSW_REG(mtmp),
+ MLXSW_REG(mtwe),
+ MLXSW_REG(mtbr),
MLXSW_REG(mcia),
MLXSW_REG(mpat),
MLXSW_REG(mpar),
+ MLXSW_REG(mgir),
MLXSW_REG(mrsr),
MLXSW_REG(mlcr),
+ MLXSW_REG(mtpps),
+ MLXSW_REG(mtutc),
MLXSW_REG(mpsc),
MLXSW_REG(mcqi),
MLXSW_REG(mcc),
MLXSW_REG(mcda),
MLXSW_REG(mgpc),
+ MLXSW_REG(mprs),
+ MLXSW_REG(mogcr),
+ MLXSW_REG(mpagr),
+ MLXSW_REG(momte),
+ MLXSW_REG(mtpppc),
+ MLXSW_REG(mtpptr),
+ MLXSW_REG(mtptpt),
+ MLXSW_REG(mfgd),
+ MLXSW_REG(mgpir),
+ MLXSW_REG(mfde),
+ MLXSW_REG(tngcr),
+ MLXSW_REG(tnumt),
+ MLXSW_REG(tnqcr),
+ MLXSW_REG(tnqdr),
+ MLXSW_REG(tneem),
+ MLXSW_REG(tndem),
+ MLXSW_REG(tnpc),
MLXSW_REG(tigcr),
+ MLXSW_REG(tieem),
+ MLXSW_REG(tidem),
MLXSW_REG(sbpr),
MLXSW_REG(sbcm),
MLXSW_REG(sbpm),
--
Gitblit v1.6.2