From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 466 +++++++++++++++++++++++++++++-----------------------------
1 files changed, 232 insertions(+), 234 deletions(-)
diff --git a/kernel/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/kernel/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 15029a5..5e1e464 100644
--- a/kernel/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/kernel/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -55,7 +55,6 @@
/*
* Generic information about the driver.
*/
-#define DRV_VERSION "2.0.0-ko"
#define DRV_DESC "Chelsio T4/T5/T6 Virtual Function (VF) Network Driver"
/*
@@ -155,6 +154,8 @@
const char *fc;
const struct port_info *pi = netdev_priv(dev);
+ netif_carrier_on(dev);
+
switch (pi->link_cfg.speed) {
case 100:
s = "100Mbps";
@@ -200,6 +201,7 @@
netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s, fc);
} else {
+ netif_carrier_off(dev);
netdev_info(dev, "link down\n");
}
}
@@ -236,6 +238,72 @@
"inserted\n", dev->name, pi->mod_type);
}
+static int cxgb4vf_set_addr_hash(struct port_info *pi)
+{
+ struct adapter *adapter = pi->adapter;
+ u64 vec = 0;
+ bool ucast = false;
+ struct hash_mac_addr *entry;
+
+ /* Calculate the hash vector for the updated list and program it */
+ list_for_each_entry(entry, &adapter->mac_hlist, list) {
+ ucast |= is_unicast_ether_addr(entry->addr);
+ vec |= (1ULL << hash_mac_addr(entry->addr));
+ }
+ return t4vf_set_addr_hash(adapter, pi->viid, ucast, vec, false);
+}
+
+/**
+ * cxgb4vf_change_mac - Update match filter for a MAC address.
+ * @pi: the port_info
+ * @viid: the VI id
+ * @tcam_idx: TCAM index of existing filter for old value of MAC address,
+ * or -1
+ * @addr: the new MAC address value
+ * @persistent: whether a new MAC allocation should be persistent
+ *
+ * Modifies an MPS filter and sets it to the new MAC address if
+ * @tcam_idx >= 0, or adds the MAC address to a new filter if
+ * @tcam_idx < 0. In the latter case the address is added persistently
+ * if @persist is %true.
+ * Addresses are programmed to hash region, if tcam runs out of entries.
+ *
+ */
+static int cxgb4vf_change_mac(struct port_info *pi, unsigned int viid,
+ int *tcam_idx, const u8 *addr, bool persistent)
+{
+ struct hash_mac_addr *new_entry, *entry;
+ struct adapter *adapter = pi->adapter;
+ int ret;
+
+ ret = t4vf_change_mac(adapter, viid, *tcam_idx, addr, persistent);
+ /* We ran out of TCAM entries. try programming hash region. */
+ if (ret == -ENOMEM) {
+ /* If the MAC address to be updated is in the hash addr
+ * list, update it from the list
+ */
+ list_for_each_entry(entry, &adapter->mac_hlist, list) {
+ if (entry->iface_mac) {
+ ether_addr_copy(entry->addr, addr);
+ goto set_hash;
+ }
+ }
+ new_entry = kzalloc(sizeof(*new_entry), GFP_KERNEL);
+ if (!new_entry)
+ return -ENOMEM;
+ ether_addr_copy(new_entry->addr, addr);
+ new_entry->iface_mac = true;
+ list_add_tail(&new_entry->list, &adapter->mac_hlist);
+set_hash:
+ ret = cxgb4vf_set_addr_hash(pi);
+ } else if (ret >= 0) {
+ *tcam_idx = ret;
+ ret = 0;
+ }
+
+ return ret;
+}
+
/*
* Net device operations.
* ======================
@@ -259,14 +327,10 @@
*/
ret = t4vf_set_rxmode(pi->adapter, pi->viid, dev->mtu, -1, -1, -1, 1,
true);
- if (ret == 0) {
- ret = t4vf_change_mac(pi->adapter, pi->viid,
- pi->xact_addr_filt, dev->dev_addr, true);
- if (ret >= 0) {
- pi->xact_addr_filt = ret;
- ret = 0;
- }
- }
+ if (ret == 0)
+ ret = cxgb4vf_change_mac(pi, pi->viid,
+ &pi->xact_addr_filt,
+ dev->dev_addr, true);
/*
* We don't need to actually "start the link" itself since the
@@ -275,16 +339,6 @@
*/
if (ret == 0)
ret = t4vf_enable_pi(pi->adapter, pi, true, true);
-
- /* The Virtual Interfaces are connected to an internal switch on the
- * chip which allows VIs attached to the same port to talk to each
- * other even when the port link is down. As a result, we generally
- * want to always report a VI's link as being "up", provided there are
- * no errors in enabling vi.
- */
-
- if (ret == 0)
- netif_carrier_on(dev);
return ret;
}
@@ -406,7 +460,7 @@
* The interrupt queue doesn't use NAPI so we do the 0-increment of
* its Going To Sleep register here to get it started.
*/
- if (adapter->flags & USING_MSI)
+ if (adapter->flags & CXGB4VF_USING_MSI)
t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
CIDXINC_V(0) |
SEINTARM_V(s->intrq.intr_params) |
@@ -462,8 +516,8 @@
break;
}
cpl = (void *)p;
- /*FALLTHROUGH*/
}
+ fallthrough;
case CPL_SGE_EGR_UPDATE: {
/*
@@ -550,7 +604,7 @@
* the intrq's queue ID as the interrupt forwarding queue for the
* subsequent calls ...
*/
- if (adapter->flags & USING_MSI) {
+ if (adapter->flags & CXGB4VF_USING_MSI) {
err = t4vf_sge_alloc_rxq(adapter, &s->intrq, false,
adapter->port[0], 0, NULL, NULL);
if (err)
@@ -710,7 +764,7 @@
* adapter setup. Once we've done this, many of our adapter
* parameters can no longer be changed ...
*/
- if ((adapter->flags & FULL_INIT_DONE) == 0) {
+ if ((adapter->flags & CXGB4VF_FULL_INIT_DONE) == 0) {
err = setup_sge_queues(adapter);
if (err)
return err;
@@ -720,17 +774,18 @@
return err;
}
- if (adapter->flags & USING_MSIX)
+ if (adapter->flags & CXGB4VF_USING_MSIX)
name_msix_vecs(adapter);
- adapter->flags |= FULL_INIT_DONE;
+ adapter->flags |= CXGB4VF_FULL_INIT_DONE;
}
/*
* Acquire our interrupt resources. We only support MSI-X and MSI.
*/
- BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
- if (adapter->flags & USING_MSIX)
+ BUG_ON((adapter->flags &
+ (CXGB4VF_USING_MSIX | CXGB4VF_USING_MSI)) == 0);
+ if (adapter->flags & CXGB4VF_USING_MSIX)
err = request_msix_queue_irqs(adapter);
else
err = request_irq(adapter->pdev->irq,
@@ -761,7 +816,7 @@
/*
* Free interrupt resources.
*/
- if (adapter->flags & USING_MSIX)
+ if (adapter->flags & CXGB4VF_USING_MSIX)
free_msix_queue_irqs(adapter);
else
free_irq(adapter->pdev->irq, adapter);
@@ -782,6 +837,13 @@
struct adapter *adapter = pi->adapter;
/*
+ * If we don't have a connection to the firmware there's nothing we
+ * can do.
+ */
+ if (!(adapter->flags & CXGB4VF_FW_OK))
+ return -ENXIO;
+
+ /*
* If this is the first interface that we're opening on the "adapter",
* bring the "adapter" up now.
*/
@@ -790,6 +852,13 @@
if (err)
return err;
}
+
+ /* It's possible that the basic port information could have
+ * changed since we first read it.
+ */
+ err = t4vf_update_port_info(pi);
+ if (err < 0)
+ goto err_unwind;
/*
* Note that this interface is up and start everything up ...
@@ -861,21 +930,6 @@
ns->rx_errors = stats.rx_err_frames;
return ns;
-}
-
-static inline int cxgb4vf_set_addr_hash(struct port_info *pi)
-{
- struct adapter *adapter = pi->adapter;
- u64 vec = 0;
- bool ucast = false;
- struct hash_mac_addr *entry;
-
- /* Calculate the hash vector for the updated list and program it */
- list_for_each_entry(entry, &adapter->mac_hlist, list) {
- ucast |= is_unicast_ether_addr(entry->addr);
- vec |= (1ULL << hash_mac_addr(entry->addr));
- }
- return t4vf_set_addr_hash(adapter, pi->viid, ucast, vec, false);
}
static int cxgb4vf_mac_sync(struct net_device *netdev, const u8 *mac_addr)
@@ -1159,13 +1213,12 @@
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- ret = t4vf_change_mac(pi->adapter, pi->viid, pi->xact_addr_filt,
- addr->sa_data, true);
+ ret = cxgb4vf_change_mac(pi, pi->viid, &pi->xact_addr_filt,
+ addr->sa_data, true);
if (ret < 0)
return ret;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- pi->xact_addr_filt = ret;
return 0;
}
@@ -1179,7 +1232,7 @@
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
- if (adapter->flags & USING_MSIX) {
+ if (adapter->flags & CXGB4VF_USING_MSIX) {
struct sge_eth_rxq *rxq;
int nqsets;
@@ -1354,7 +1407,7 @@
case FW_PORT_TYPE_CR4_QSFP:
SET_LMM(FIBRE);
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
- FW_CAPS_TO_LMM(SPEED_10G, 10000baseSR_Full);
+ FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full);
FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full);
FW_CAPS_TO_LMM(SPEED_50G, 50000baseCR2_Full);
@@ -1363,6 +1416,13 @@
default:
break;
+ }
+
+ if (fw_caps & FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M)) {
+ FW_CAPS_TO_LMM(FEC_RS, FEC_RS);
+ FW_CAPS_TO_LMM(FEC_BASER_RS, FEC_BASER);
+ } else {
+ SET_LMM(FEC_NONE);
}
FW_CAPS_TO_LMM(ANEG, Autoneg);
@@ -1415,22 +1475,6 @@
} else {
base->speed = SPEED_UNKNOWN;
base->duplex = DUPLEX_UNKNOWN;
- }
-
- if (pi->link_cfg.fc & PAUSE_RX) {
- if (pi->link_cfg.fc & PAUSE_TX) {
- ethtool_link_ksettings_add_link_mode(link_ksettings,
- advertising,
- Pause);
- } else {
- ethtool_link_ksettings_add_link_mode(link_ksettings,
- advertising,
- Asym_Pause);
- }
- } else if (pi->link_cfg.fc & PAUSE_TX) {
- ethtool_link_ksettings_add_link_mode(link_ksettings,
- advertising,
- Asym_Pause);
}
base->autoneg = pi->link_cfg.autoneg;
@@ -1510,7 +1554,6 @@
struct adapter *adapter = netdev2adap(dev);
strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
- strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
strlcpy(drvinfo->bus_info, pci_name(to_pci_dev(dev->dev.parent)),
sizeof(drvinfo->bus_info));
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
@@ -1587,7 +1630,7 @@
rp->tx_pending < MIN_TXQ_ENTRIES)
return -EINVAL;
- if (adapter->flags & FULL_INIT_DONE)
+ if (adapter->flags & CXGB4VF_FULL_INIT_DONE)
return -EBUSY;
for (qs = pi->first_qset; qs < pi->first_qset + pi->nqsets; qs++) {
@@ -1644,8 +1687,8 @@
struct port_info *pi = netdev_priv(dev);
pauseparam->autoneg = (pi->link_cfg.requested_fc & PAUSE_AUTONEG) != 0;
- pauseparam->rx_pause = (pi->link_cfg.fc & PAUSE_RX) != 0;
- pauseparam->tx_pause = (pi->link_cfg.fc & PAUSE_TX) != 0;
+ pauseparam->rx_pause = (pi->link_cfg.advertised_fc & PAUSE_RX) != 0;
+ pauseparam->tx_pause = (pi->link_cfg.advertised_fc & PAUSE_TX) != 0;
}
/*
@@ -1871,8 +1914,12 @@
* TCP Segmentation Offload flags which we support.
*/
#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
+#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \
+ NETIF_F_GRO | NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA)
static const struct ethtool_ops cxgb4vf_ethtool_ops = {
+ .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
+ ETHTOOL_COALESCE_RX_MAX_FRAMES,
.get_link_ksettings = cxgb4vf_get_link_ksettings,
.get_fecparam = cxgb4vf_get_fecparam,
.get_drvinfo = cxgb4vf_get_drvinfo,
@@ -1970,33 +2017,14 @@
{
}
-static const struct seq_operations mboxlog_seq_ops = {
+static const struct seq_operations mboxlog_sops = {
.start = mboxlog_start,
.next = mboxlog_next,
.stop = mboxlog_stop,
.show = mboxlog_show
};
-static int mboxlog_open(struct inode *inode, struct file *file)
-{
- int res = seq_open(file, &mboxlog_seq_ops);
-
- if (!res) {
- struct seq_file *seq = file->private_data;
-
- seq->private = inode->i_private;
- }
- return res;
-}
-
-static const struct file_operations mboxlog_fops = {
- .owner = THIS_MODULE,
- .open = mboxlog_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
+DEFINE_SEQ_ATTRIBUTE(mboxlog);
/*
* Show SGE Queue Set information. We display QPL Queues Sets per line.
*/
@@ -2102,7 +2130,7 @@
static int sge_queue_entries(const struct adapter *adapter)
{
return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 +
- ((adapter->flags & USING_MSI) != 0);
+ ((adapter->flags & CXGB4VF_USING_MSI) != 0);
}
static void *sge_queue_start(struct seq_file *seq, loff_t *pos)
@@ -2124,31 +2152,14 @@
return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
}
-static const struct seq_operations sge_qinfo_seq_ops = {
+static const struct seq_operations sge_qinfo_sops = {
.start = sge_queue_start,
.next = sge_queue_next,
.stop = sge_queue_stop,
.show = sge_qinfo_show
};
-static int sge_qinfo_open(struct inode *inode, struct file *file)
-{
- int res = seq_open(file, &sge_qinfo_seq_ops);
-
- if (!res) {
- struct seq_file *seq = file->private_data;
- seq->private = inode->i_private;
- }
- return res;
-}
-
-static const struct file_operations sge_qinfo_debugfs_fops = {
- .owner = THIS_MODULE,
- .open = sge_qinfo_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
+DEFINE_SEQ_ATTRIBUTE(sge_qinfo);
/*
* Show SGE Queue Set statistics. We display QPL Queues Sets per line.
@@ -2248,7 +2259,7 @@
static int sge_qstats_entries(const struct adapter *adapter)
{
return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 +
- ((adapter->flags & USING_MSI) != 0);
+ ((adapter->flags & CXGB4VF_USING_MSI) != 0);
}
static void *sge_qstats_start(struct seq_file *seq, loff_t *pos)
@@ -2270,31 +2281,14 @@
return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
}
-static const struct seq_operations sge_qstats_seq_ops = {
+static const struct seq_operations sge_qstats_sops = {
.start = sge_qstats_start,
.next = sge_qstats_next,
.stop = sge_qstats_stop,
.show = sge_qstats_show
};
-static int sge_qstats_open(struct inode *inode, struct file *file)
-{
- int res = seq_open(file, &sge_qstats_seq_ops);
-
- if (res == 0) {
- struct seq_file *seq = file->private_data;
- seq->private = inode->i_private;
- }
- return res;
-}
-
-static const struct file_operations sge_qstats_proc_fops = {
- .owner = THIS_MODULE,
- .open = sge_qstats_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
+DEFINE_SEQ_ATTRIBUTE(sge_qstats);
/*
* Show PCI-E SR-IOV Virtual Function Resource Limits.
@@ -2323,19 +2317,7 @@
return 0;
}
-
-static int resources_open(struct inode *inode, struct file *file)
-{
- return single_open(file, resources_show, inode->i_private);
-}
-
-static const struct file_operations resources_proc_fops = {
- .owner = THIS_MODULE,
- .open = resources_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(resources);
/*
* Show Virtual Interfaces.
@@ -2380,31 +2362,14 @@
{
}
-static const struct seq_operations interfaces_seq_ops = {
+static const struct seq_operations interfaces_sops = {
.start = interfaces_start,
.next = interfaces_next,
.stop = interfaces_stop,
.show = interfaces_show
};
-static int interfaces_open(struct inode *inode, struct file *file)
-{
- int res = seq_open(file, &interfaces_seq_ops);
-
- if (res == 0) {
- struct seq_file *seq = file->private_data;
- seq->private = inode->i_private;
- }
- return res;
-}
-
-static const struct file_operations interfaces_proc_fops = {
- .owner = THIS_MODULE,
- .open = interfaces_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
+DEFINE_SEQ_ATTRIBUTE(interfaces);
/*
* /sys/kernel/debugfs/cxgb4vf/ files list.
@@ -2417,10 +2382,10 @@
static struct cxgb4vf_debugfs_entry debugfs_files[] = {
{ "mboxlog", 0444, &mboxlog_fops },
- { "sge_qinfo", 0444, &sge_qinfo_debugfs_fops },
- { "sge_qstats", 0444, &sge_qstats_proc_fops },
- { "resources", 0444, &resources_proc_fops },
- { "interfaces", 0444, &interfaces_proc_fops },
+ { "sge_qinfo", 0444, &sge_qinfo_fops },
+ { "sge_qstats", 0444, &sge_qstats_fops },
+ { "resources", 0444, &resources_fops },
+ { "interfaces", 0444, &interfaces_fops },
};
/*
@@ -2442,11 +2407,10 @@
* Debugfs support is best effort.
*/
for (i = 0; i < ARRAY_SIZE(debugfs_files); i++)
- (void)debugfs_create_file(debugfs_files[i].name,
- debugfs_files[i].mode,
- adapter->debugfs_root,
- (void *)adapter,
- debugfs_files[i].fops);
+ debugfs_create_file(debugfs_files[i].name,
+ debugfs_files[i].mode,
+ adapter->debugfs_root, adapter,
+ debugfs_files[i].fops);
return 0;
}
@@ -2669,6 +2633,7 @@
*/
size_nports_qsets(adapter);
+ adapter->flags |= CXGB4VF_FW_OK;
return 0;
}
@@ -2703,7 +2668,8 @@
* support. In particular, this means that we need to know what kind
* of interrupts we'll be using ...
*/
- BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
+ BUG_ON((adapter->flags &
+ (CXGB4VF_USING_MSIX | CXGB4VF_USING_MSI)) == 0);
/*
* Count the number of 10GbE Virtual Interfaces that we have.
@@ -2880,6 +2846,39 @@
#endif
};
+/**
+ * cxgb4vf_get_port_mask - Get port mask for the VF based on mac
+ * address stored on the adapter
+ * @adapter: The adapter
+ *
+ * Find the the port mask for the VF based on the index of mac
+ * address stored in the adapter. If no mac address is stored on
+ * the adapter for the VF, use the port mask received from the
+ * firmware.
+ */
+static unsigned int cxgb4vf_get_port_mask(struct adapter *adapter)
+{
+ unsigned int naddr = 1, pidx = 0;
+ unsigned int pmask, rmask = 0;
+ u8 mac[ETH_ALEN];
+ int err;
+
+ pmask = adapter->params.vfres.pmask;
+ while (pmask) {
+ if (pmask & 1) {
+ err = t4vf_get_vf_mac_acl(adapter, pidx, &naddr, mac);
+ if (!err && !is_zero_ether_addr(mac))
+ rmask |= (1 << pidx);
+ }
+ pmask >>= 1;
+ pidx++;
+ }
+ if (!rmask)
+ rmask = adapter->params.vfres.pmask;
+
+ return rmask;
+}
+
/*
* "Probe" a device: initialize a device and construct all kernel and driver
* state needed to manage the device. This routine is called "init_one" in
@@ -2888,19 +2887,12 @@
static int cxgb4vf_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ struct adapter *adapter;
+ struct net_device *netdev;
+ struct port_info *pi;
+ unsigned int pmask;
int pci_using_dac;
int err, pidx;
- unsigned int pmask;
- struct adapter *adapter;
- struct port_info *pi;
- struct net_device *netdev;
- unsigned int pf;
-
- /*
- * Print our driver banner the first time we're called to initialize a
- * device.
- */
- pr_info_once("%s - version %s\n", DRV_DESC, DRV_VERSION);
/*
* Initialize generic PCI device state.
@@ -3029,11 +3021,13 @@
* using Relaxed Ordering.
*/
if (!pcie_relaxed_ordering_enabled(pdev))
- adapter->flags |= ROOT_NO_RELAXED_ORDERING;
+ adapter->flags |= CXGB4VF_ROOT_NO_RELAXED_ORDERING;
err = adap_init0(adapter);
if (err)
- goto err_unmap_bar;
+ dev_err(&pdev->dev,
+ "Adapter initialization failed, error %d. Continuing in debug mode\n",
+ err);
/* Initialize hash mac addr list */
INIT_LIST_HEAD(&adapter->mac_hlist);
@@ -3041,8 +3035,7 @@
/*
* Allocate our "adapter ports" and stitch everything together.
*/
- pmask = adapter->params.vfres.pmask;
- pf = t4vf_get_pf_from_vf(adapter);
+ pmask = cxgb4vf_get_port_mask(adapter);
for_each_port(adapter, pidx) {
int port_id, viid;
u8 mac[ETH_ALEN];
@@ -3058,13 +3051,6 @@
break;
port_id = ffs(pmask) - 1;
pmask &= ~(1 << port_id);
- viid = t4vf_alloc_vi(adapter, port_id);
- if (viid < 0) {
- dev_err(&pdev->dev, "cannot allocate VI for port %d:"
- " err=%d\n", port_id, viid);
- err = viid;
- goto err_free_dev;
- }
/*
* Allocate our network device and stitch things together.
@@ -3072,7 +3058,6 @@
netdev = alloc_etherdev_mq(sizeof(struct port_info),
MAX_PORT_QSETS);
if (netdev == NULL) {
- t4vf_free_vi(adapter, viid);
err = -ENOMEM;
goto err_free_dev;
}
@@ -3082,26 +3067,21 @@
pi->adapter = adapter;
pi->pidx = pidx;
pi->port_id = port_id;
- pi->viid = viid;
/*
* Initialize the starting state of our "port" and register
* it.
*/
pi->xact_addr_filt = -1;
- netif_carrier_off(netdev);
netdev->irq = pdev->irq;
- netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_RXCSUM;
- netdev->vlan_features = NETIF_F_SG | TSO_FLAGS |
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_HIGHDMA;
- netdev->features = netdev->hw_features |
- NETIF_F_HW_VLAN_CTAG_TX;
+ netdev->hw_features = NETIF_F_SG | TSO_FLAGS | NETIF_F_GRO |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+ netdev->features = netdev->hw_features;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features = netdev->features & VLAN_FEAT;
netdev->priv_flags |= IFF_UNICAST_FLT;
netdev->min_mtu = 81;
@@ -3110,6 +3090,23 @@
netdev->netdev_ops = &cxgb4vf_netdev_ops;
netdev->ethtool_ops = &cxgb4vf_ethtool_ops;
netdev->dev_port = pi->port_id;
+
+ /*
+ * If we haven't been able to contact the firmware, there's
+ * nothing else we can do for this "port" ...
+ */
+ if (!(adapter->flags & CXGB4VF_FW_OK))
+ continue;
+
+ viid = t4vf_alloc_vi(adapter, port_id);
+ if (viid < 0) {
+ dev_err(&pdev->dev,
+ "cannot allocate VI for port %d: err=%d\n",
+ port_id, viid);
+ err = viid;
+ goto err_free_dev;
+ }
+ pi->viid = viid;
/*
* Initialize the hardware/software state for the port.
@@ -3121,7 +3118,7 @@
goto err_free_dev;
}
- err = t4vf_get_vf_mac_acl(adapter, pf, &naddr, mac);
+ err = t4vf_get_vf_mac_acl(adapter, port_id, &naddr, mac);
if (err) {
dev_err(&pdev->dev,
"unable to determine MAC ACL address, "
@@ -3148,7 +3145,7 @@
* get MSI interrupts we bail with the error.
*/
if (msi == MSI_MSIX && enable_msix(adapter) == 0)
- adapter->flags |= USING_MSIX;
+ adapter->flags |= CXGB4VF_USING_MSIX;
else {
if (msi == MSI_MSIX) {
dev_info(adapter->pdev_dev,
@@ -3168,7 +3165,7 @@
" err=%d\n", err);
goto err_free_dev;
}
- adapter->flags |= USING_MSI;
+ adapter->flags |= CXGB4VF_USING_MSI;
}
/* Now that we know how many "ports" we have and what interrupt
@@ -3198,6 +3195,7 @@
continue;
}
+ netif_carrier_off(netdev);
set_bit(pidx, &adapter->registered_device_map);
}
if (adapter->registered_device_map == 0) {
@@ -3212,11 +3210,7 @@
adapter->debugfs_root =
debugfs_create_dir(pci_name(pdev),
cxgb4vf_debugfs_root);
- if (IS_ERR_OR_NULL(adapter->debugfs_root))
- dev_warn(&pdev->dev, "could not create debugfs"
- " directory");
- else
- setup_debugfs(adapter);
+ setup_debugfs(adapter);
}
/*
@@ -3226,8 +3220,8 @@
for_each_port(adapter, pidx) {
dev_info(adapter->pdev_dev, "%s: Chelsio VF NIC PCIe %s\n",
adapter->port[pidx]->name,
- (adapter->flags & USING_MSIX) ? "MSI-X" :
- (adapter->flags & USING_MSI) ? "MSI" : "");
+ (adapter->flags & CXGB4VF_USING_MSIX) ? "MSI-X" :
+ (adapter->flags & CXGB4VF_USING_MSI) ? "MSI" : "");
}
/*
@@ -3240,12 +3234,12 @@
* so far and return the error.
*/
err_disable_interrupts:
- if (adapter->flags & USING_MSIX) {
+ if (adapter->flags & CXGB4VF_USING_MSIX) {
pci_disable_msix(adapter->pdev);
- adapter->flags &= ~USING_MSIX;
- } else if (adapter->flags & USING_MSI) {
+ adapter->flags &= ~CXGB4VF_USING_MSIX;
+ } else if (adapter->flags & CXGB4VF_USING_MSI) {
pci_disable_msi(adapter->pdev);
- adapter->flags &= ~USING_MSI;
+ adapter->flags &= ~CXGB4VF_USING_MSI;
}
err_free_dev:
@@ -3254,13 +3248,13 @@
if (netdev == NULL)
continue;
pi = netdev_priv(netdev);
- t4vf_free_vi(adapter, pi->viid);
+ if (pi->viid)
+ t4vf_free_vi(adapter, pi->viid);
if (test_bit(pidx, &adapter->registered_device_map))
unregister_netdev(netdev);
free_netdev(netdev);
}
-err_unmap_bar:
if (!is_t4(adapter->params.chip))
iounmap(adapter->bar2);
@@ -3289,6 +3283,7 @@
static void cxgb4vf_pci_remove(struct pci_dev *pdev)
{
struct adapter *adapter = pci_get_drvdata(pdev);
+ struct hash_mac_addr *entry, *tmp;
/*
* Tear down driver state associated with device.
@@ -3304,12 +3299,12 @@
if (test_bit(pidx, &adapter->registered_device_map))
unregister_netdev(adapter->port[pidx]);
t4vf_sge_stop(adapter);
- if (adapter->flags & USING_MSIX) {
+ if (adapter->flags & CXGB4VF_USING_MSIX) {
pci_disable_msix(adapter->pdev);
- adapter->flags &= ~USING_MSIX;
- } else if (adapter->flags & USING_MSI) {
+ adapter->flags &= ~CXGB4VF_USING_MSIX;
+ } else if (adapter->flags & CXGB4VF_USING_MSI) {
pci_disable_msi(adapter->pdev);
- adapter->flags &= ~USING_MSI;
+ adapter->flags &= ~CXGB4VF_USING_MSI;
}
/*
@@ -3332,13 +3327,19 @@
continue;
pi = netdev_priv(netdev);
- t4vf_free_vi(adapter, pi->viid);
+ if (pi->viid)
+ t4vf_free_vi(adapter, pi->viid);
free_netdev(netdev);
}
iounmap(adapter->regs);
if (!is_t4(adapter->params.chip))
iounmap(adapter->bar2);
kfree(adapter->mbox_log);
+ list_for_each_entry_safe(entry, tmp, &adapter->mac_hlist,
+ list) {
+ list_del(&entry->list);
+ kfree(entry);
+ }
kfree(adapter);
}
@@ -3375,12 +3376,12 @@
* Interrupts allowing various internal pathways to drain.
*/
t4vf_sge_stop(adapter);
- if (adapter->flags & USING_MSIX) {
+ if (adapter->flags & CXGB4VF_USING_MSIX) {
pci_disable_msix(adapter->pdev);
- adapter->flags &= ~USING_MSIX;
- } else if (adapter->flags & USING_MSI) {
+ adapter->flags &= ~CXGB4VF_USING_MSIX;
+ } else if (adapter->flags & CXGB4VF_USING_MSI) {
pci_disable_msi(adapter->pdev);
- adapter->flags &= ~USING_MSI;
+ adapter->flags &= ~CXGB4VF_USING_MSI;
}
/*
@@ -3407,7 +3408,6 @@
MODULE_DESCRIPTION(DRV_DESC);
MODULE_AUTHOR("Chelsio Communications");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, cxgb4vf_pci_tbl);
static struct pci_driver cxgb4vf_driver = {
@@ -3434,13 +3434,11 @@
return -EINVAL;
}
- /* Debugfs support is optional, just warn if this fails */
+ /* Debugfs support is optional, debugfs will warn if this fails */
cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
- if (IS_ERR_OR_NULL(cxgb4vf_debugfs_root))
- pr_warn("could not create debugfs entry, continuing\n");
ret = pci_register_driver(&cxgb4vf_driver);
- if (ret < 0 && !IS_ERR_OR_NULL(cxgb4vf_debugfs_root))
+ if (ret < 0)
debugfs_remove(cxgb4vf_debugfs_root);
return ret;
}
--
Gitblit v1.6.2