From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/mach-sa1100/hackkit.c | 56 ++------------------------------------------------------
1 files changed, 2 insertions(+), 54 deletions(-)
diff --git a/kernel/arch/arm/mach-sa1100/hackkit.c b/kernel/arch/arm/mach-sa1100/hackkit.c
index 643d5f2..3085f1c 100644
--- a/kernel/arch/arm/mach-sa1100/hackkit.c
+++ b/kernel/arch/arm/mach-sa1100/hackkit.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-sa1100/hackkit.c
*
@@ -5,11 +6,6 @@
*
* This file contains all HackKit tweaks. Based on original work from
* Nicolas Pitre's assabet fixes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -26,11 +22,11 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <linux/pgtable.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
-#include <asm/pgtable.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -49,8 +45,6 @@
/* init funcs */
static void __init hackkit_map_io(void);
-static u_int hackkit_get_mctrl(struct uart_port *port);
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
/**********************************************************************
@@ -71,8 +65,6 @@
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
- .set_mctrl = hackkit_set_mctrl,
- .get_mctrl = hackkit_get_mctrl,
.pm = hackkit_uart_pm,
};
@@ -103,50 +95,6 @@
static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
/* TODO: switch on/off uart in powersave mode */
-}
-
-/*
- * Note! this can be called from IRQ context.
- * FIXME: No modem ctrl lines yet.
- */
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-#if 0
- if (port->mapbase == _Ser1UTCR0) {
- u_int set = 0, clear = 0;
-
- if (mctrl & TIOCM_RTS)
- set |= PT_CTRL2_RS1_RTS;
- else
- clear |= PT_CTRL2_RS1_RTS;
-
- if (mctrl & TIOCM_DTR)
- set |= PT_CTRL2_RS1_DTR;
- else
- clear |= PT_CTRL2_RS1_DTR;
-
- PTCTRL2_clear(clear);
- PTCTRL2_set(set);
- }
-#endif
-}
-
-static u_int hackkit_get_mctrl(struct uart_port *port)
-{
- u_int ret = 0;
-#if 0
- u_int irqsr = PT_IRQSR;
-
- /* need 2 reads to read current value */
- irqsr = PT_IRQSR;
-
- /* TODO: check IRQ source register for modem/com
- status lines and set them correctly. */
-#endif
-
- ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
- return ret;
}
static struct mtd_partition hackkit_partitions[] = {
--
Gitblit v1.6.2