From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/mach-davinci/board-mityomapl138.c | 74 ++++++++++++++++++++++++++----------
1 files changed, 53 insertions(+), 21 deletions(-)
diff --git a/kernel/arch/arm/mach-davinci/board-mityomapl138.c b/kernel/arch/arm/mach-davinci/board-mityomapl138.c
index 2933e0c..5205008 100644
--- a/kernel/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/kernel/arch/arm/mach-davinci/board-mityomapl138.c
@@ -1,7 +1,7 @@
/*
* Critical Link MityOMAP-L138 SoM
*
- * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
+ * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of
@@ -14,10 +14,13 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/mtd/partitions.h>
+#include <linux/notifier.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
#include <linux/etherdevice.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
@@ -26,7 +29,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include "cp_intc.h"
#include <mach/da8xx.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
@@ -116,11 +118,15 @@
static void mityomapl138_cpufreq_init(const char *partnum) { }
#endif
-static void read_factory_config(struct nvmem_device *nvmem, void *context)
+static int read_factory_config(struct notifier_block *nb,
+ unsigned long event, void *data)
{
int ret;
const char *partnum = NULL;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct nvmem_device *nvmem = data;
+
+ if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
+ return NOTIFY_DONE;
if (!IS_BUILTIN(CONFIG_NVMEM)) {
pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -146,27 +152,49 @@
goto bad_config;
}
- pr_info("Found MAC = %pM\n", factory_config.mac);
- if (is_valid_ether_addr(factory_config.mac))
- memcpy(soc_info->emac_pdata->mac_addr,
- factory_config.mac, ETH_ALEN);
- else
- pr_warn("Invalid MAC found in factory config block\n");
-
partnum = factory_config.partnum;
pr_info("Part Number = %s\n", partnum);
bad_config:
/* default maximum speed is valid for all platforms */
mityomapl138_cpufreq_init(partnum);
+
+ return NOTIFY_STOP;
}
-static struct at24_platform_data mityomapl138_fd_chip = {
- .byte_len = 256,
- .page_size = 8,
- .flags = AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
- .setup = read_factory_config,
- .context = NULL,
+static struct notifier_block mityomapl138_nvmem_notifier = {
+ .notifier_call = read_factory_config,
+};
+
+/*
+ * We don't define a cell for factory config as it will be accessed from the
+ * board file using the nvmem notifier chain.
+ */
+static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x64,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
+ .nvmem_name = "1-00500",
+ .cells = mityomapl138_nvmem_cells,
+ .ncells = ARRAY_SIZE(mityomapl138_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
+ .nvmem_name = "1-00500",
+ .cell_name = "macaddr",
+ .dev_id = "davinci_emac.1",
+ .con_id = "mac-address",
+};
+
+static const struct property_entry mityomapl138_fd_chip_properties[] = {
+ PROPERTY_ENTRY_U32("pagesize", 8),
+ PROPERTY_ENTRY_BOOL("read-only"),
+ { }
};
static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
@@ -295,7 +323,7 @@
},
{
I2C_BOARD_INFO("24c02", 0x50),
- .platform_data = &mityomapl138_fd_chip,
+ .properties = mityomapl138_fd_chip_properties,
},
};
@@ -404,7 +432,7 @@
.core_chipsel = 1,
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
@@ -543,6 +571,10 @@
davinci_serial_init(da8xx_serial_device);
+ nvmem_register_notifier(&mityomapl138_nvmem_notifier);
+ nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
+ nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
+
ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
if (ret)
pr_warn("i2c0 registration failed: %d\n", ret);
@@ -595,7 +627,7 @@
MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.atag_offset = 0x100,
.map_io = mityomapl138_map_io,
- .init_irq = cp_intc_init,
+ .init_irq = da850_init_irq,
.init_time = da850_init_time,
.init_machine = mityomapl138_init,
.init_late = davinci_init_late,
--
Gitblit v1.6.2