From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/vf610-zii-dev.dtsi | 69 +++++++++++++++++++++++++++++-----
1 files changed, 58 insertions(+), 11 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/vf610-zii-dev.dtsi b/kernel/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 5ae5abf..f8299f3 100644
--- a/kernel/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/kernel/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -50,6 +50,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
@@ -82,6 +83,14 @@
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 6 0>;
+ };
+
+ supply-voltage-monitor {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 8>, /* VCC_1V5 */
+ <&adc0 9>, /* VCC_1V8 */
+ <&adc1 8>, /* VCC_1V0 */
+ <&adc1 9>; /* VCC_1V2 */
};
};
@@ -128,6 +137,8 @@
mdio1: mdio {
#address-cells = <1>;
#size-cells = <0>;
+ clock-frequency = <12500000>;
+ suppress-preamble;
status = "okay";
};
};
@@ -137,7 +148,7 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -146,12 +157,12 @@
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
@@ -174,6 +185,36 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ /*
+ * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+ * modes, so, spi-max-frequency is limited to 90MHz
+ */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ m25p,fast-read;
+ };
+
+ flash@2 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <2>;
+ m25p,fast-read;
+ };
};
&uart0 {
@@ -359,12 +400,18 @@
pinctrl_qspi0: qspi0grp {
fsl,pins = <
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
- VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
>;
};
@@ -384,8 +431,8 @@
pinctrl_uart2: uart2grp {
fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD23__UART2_TX 0x21a2
+ VF610_PAD_PTD22__UART2_RX 0x21a1
>;
};
--
Gitblit v1.6.2