From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G

---
 kernel/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts |   48 ++++++++++++------------------------------------
 1 files changed, 12 insertions(+), 36 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/kernel/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index d20fd03..2adbac8 100644
--- a/kernel/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/kernel/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -105,14 +105,10 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -126,8 +122,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -142,8 +136,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -153,9 +145,13 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -175,32 +171,14 @@
 };
 
 &pio {
-	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-		pins = "PC3";
-		function = "gpio_out";
-	};
-
-	led_pins_olinuxinolime: led_pins@0 {
+	led_pins_olinuxinolime: led-pins {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
 	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -219,7 +197,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -229,10 +207,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;

--
Gitblit v1.6.2