From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/sama5d3.dtsi | 606 +++++++-----------------------------------------------
1 files changed, 85 insertions(+), 521 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/sama5d3.dtsi b/kernel/arch/arm/boot/dts/sama5d3.dtsi
index d01464b..86137f8 100644
--- a/kernel/arch/arm/boot/dts/sama5d3.dtsi
+++ b/kernel/arch/arm/boot/dts/sama5d3.dtsi
@@ -1,14 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
* applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -16,6 +14,8 @@
#include <dt-bindings/clock/at91.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Atmel SAMA5D3 family SoC";
compatible = "atmel,sama5d3", "atmel,sama5";
interrupt-parent = <&aic>;
@@ -55,7 +55,8 @@
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
};
- memory {
+ memory@20000000 {
+ device_type = "memory";
reg = <0x20000000 0x8000000>;
};
@@ -82,6 +83,9 @@
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x20000>;
};
ahb {
@@ -107,7 +111,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "mci_clk";
};
@@ -122,7 +126,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -136,7 +140,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
clock-names = "pclk";
status = "disabled";
};
@@ -147,7 +151,7 @@
#size-cells = <0>;
reg = <0xf0010000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -158,11 +162,14 @@
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
<&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
status = "disabled";
};
@@ -173,11 +180,14 @@
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
<&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
status = "disabled";
};
@@ -190,7 +200,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "usart";
status = "disabled";
};
@@ -204,7 +214,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "usart";
status = "disabled";
};
@@ -215,7 +225,7 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "usart";
status = "disabled";
};
@@ -225,7 +235,7 @@
reg = <0xf002c000 0x300>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
status = "disabled";
};
@@ -235,7 +245,7 @@
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
clock-names = "isi_clk";
status = "disabled";
port {
@@ -260,7 +270,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "mci_clk";
};
@@ -275,7 +285,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -289,7 +299,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
clock-names = "pclk";
status = "disabled";
};
@@ -316,7 +326,7 @@
&pinctrl_adc0_ad10
&pinctrl_adc0_ad11
>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xfff>;
@@ -356,11 +366,14 @@
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
status = "disabled";
};
@@ -373,7 +386,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "usart";
status = "disabled";
};
@@ -387,7 +400,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "usart";
status = "disabled";
};
@@ -398,7 +411,7 @@
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
clock-names = "sha_clk";
};
@@ -409,7 +422,7 @@
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
clock-names = "aes_clk";
};
@@ -420,7 +433,7 @@
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
clock-names = "tdes_clk";
};
@@ -428,14 +441,14 @@
compatible = "atmel,at91sam9g45-trng";
reg = <0xf8040000 0x100>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
};
hsmc: hsmc@ffffc000 {
compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
reg = <0xffffc000 0x1000>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -452,7 +465,7 @@
reg = <0xffffe600 0x200>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "dma_clk";
};
@@ -461,14 +474,14 @@
reg = <0xffffe800 0x200>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
clock-names = "dma_clk";
};
ramc0: ramc@ffffea00 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xffffea00 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
clock-names = "ddrck", "mpddr";
};
@@ -481,7 +494,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&dbgu_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
clock-names = "usart";
status = "disabled";
};
@@ -638,6 +651,12 @@
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
};
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
i2c1 {
@@ -646,6 +665,12 @@
<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
};
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ atmel,pins =
+ <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
i2c2 {
@@ -653,6 +678,12 @@
atmel,pins =
<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpio {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
@@ -939,7 +970,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
};
pioB: gpio@fffff400 {
@@ -950,7 +981,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
};
pioC: gpio@fffff600 {
@@ -961,7 +992,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
};
pioD: gpio@fffff800 {
@@ -972,7 +1003,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
};
pioE: gpio@fffffa00 {
@@ -983,7 +1014,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioE_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
};
};
@@ -991,353 +1022,9 @@
compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xfffffc00 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <8000000 50000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <0 166000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
- };
-
- periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dbgu_clk: dbgu_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- pioD_clk: pioD_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- pioE_clk: pioE_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <12>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <13>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <14>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <15>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <16>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi0_clk: twi0_clk {
- reg = <18>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 41500000>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <19>;
- atmel,clk-output-range = <0 41500000>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <20>;
- atmel,clk-output-range = <0 41500000>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <24>;
- atmel,clk-output-range = <0 166000000>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <25>;
- atmel,clk-output-range = <0 166000000>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <26>;
- atmel,clk-output-range = <0 166000000>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <29>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <33>;
- };
-
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <37>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <39>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <42>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <43>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <44>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- fuse_clk: fuse_clk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <49>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
reset_controller: rstc@fffffe00 {
@@ -1356,7 +1043,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
watchdog: watchdog@fffffe40 {
@@ -1370,30 +1057,11 @@
status = "disabled";
};
- sckc@fffffe50 {
- compatible = "atmel,at91sam9x5-sckc";
+ clk32k: sckc@fffffe50 {
+ compatible = "atmel,sama5d3-sckc";
reg = <0xfffffe50 0x4>;
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- atmel,startup-time-usec = <75>;
- };
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- atmel,startup-time-usec = <1200000>;
- };
-
- clk32k: slowck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
};
rtc@fffffeb0 {
@@ -1408,130 +1076,26 @@
compatible = "mmio-sram";
no-memory-wc;
reg = <0x200000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x2400>;
};
usb0: gadget@500000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "atmel,sama5d3-udc";
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
-
- ep@0 {
- reg = <0>;
- atmel,fifo-size = <64>;
- atmel,nb-banks = <1>;
- };
-
- ep@1 {
- reg = <1>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <3>;
- atmel,can-dma;
- atmel,can-isoc;
- };
-
- ep@2 {
- reg = <2>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <3>;
- atmel,can-dma;
- atmel,can-isoc;
- };
-
- ep@3 {
- reg = <3>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- atmel,can-dma;
- };
-
- ep@4 {
- reg = <4>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- atmel,can-dma;
- };
-
- ep@5 {
- reg = <5>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- atmel,can-dma;
- };
-
- ep@6 {
- reg = <6>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- atmel,can-dma;
- };
-
- ep@7 {
- reg = <7>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- atmel,can-dma;
- };
-
- ep@8 {
- reg = <8>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@9 {
- reg = <9>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@10 {
- reg = <10>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@11 {
- reg = <11>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@12 {
- reg = <12>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@13 {
- reg = <13>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@14 {
- reg = <14>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
-
- ep@15 {
- reg = <15>;
- atmel,fifo-size = <1024>;
- atmel,nb-banks = <2>;
- };
};
usb1: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1540,7 +1104,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -1556,7 +1120,7 @@
0x1 0x0 0x40000000 0x10000000
0x2 0x0 0x50000000 0x10000000
0x3 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
--
Gitblit v1.6.2