From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 439 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 439 insertions(+), 0 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/kernel/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index c2dc9d0..32b474b 100644
--- a/kernel/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/kernel/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -12,6 +12,7 @@
aliases {
serial0 = &blsp1_uart1;
+ serial1 = &blsp2_uart10;
};
chosen {
@@ -220,6 +221,20 @@
};
};
};
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_pin>;
+ };
};
&soc {
@@ -241,6 +256,157 @@
bias-pull-up;
};
};
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins: i2c2 {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c11_pins: i2c11 {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c12_pins: i2c12 {
+ mux {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mpu6515_pin: mpu6515 {
+ irq {
+ pins = "gpio73";
+ function = "gpio";
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ touch_pin: touch {
+ int {
+ pins = "gpio5";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ reset {
+ pins = "gpio8";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ panel_pin: panel {
+ te {
+ pins = "gpio12";
+ function = "mdp_vsync";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ bt_pin: bt {
+ hostwake {
+ pins = "gpio42";
+ function = "gpio";
+ };
+
+ devwake {
+ pins = "gpio62";
+ function = "gpio";
+ };
+
+ shutdown {
+ pins = "gpio41";
+ function = "gpio";
+ };
+ };
+
+ blsp2_uart10_pin_a: blsp2-uart10-pin-active {
+ tx {
+ pins = "gpio53";
+ function = "blsp_uart10";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio54";
+ function = "blsp_uart10";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cts {
+ pins = "gpio55";
+ function = "blsp_uart10";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rts {
+ pins = "gpio56";
+ function = "blsp_uart10";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
};
sdhci@f9824900 {
@@ -254,6 +420,32 @@
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
+ sdhci@f98a4900 {
+ status = "ok";
+
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bcrmf@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ brcm,drive-strength = <10>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ };
};
gpio-keys {
@@ -277,6 +469,230 @@
linux,code = <KEY_VOLUMEDOWN>;
};
};
+
+ serial@f9960000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp2_uart10_pin_a>;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pin>;
+
+ host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ i2c@f9967000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c11_pins>;
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ led-controller@38 {
+ compatible = "ti,lm3630a";
+ status = "ok";
+ reg = <0x38>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <200>;
+ };
+ };
+ };
+
+ i2c@f9968000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ mpu6515@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+ interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
+ vddio-supply = <&pm8941_lvs1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6515_pin>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ak8963@f {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0f>;
+ gpios = <&msmgpio 67 0>;
+ vid-supply = <&pm8941_lvs1>;
+ vdd-supply = <&pm8941_l17>;
+ };
+
+ bmp280@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ vdda-supply = <&pm8941_lvs1>;
+ vddd-supply = <&pm8941_l17>;
+ };
+ };
+ };
+ };
+
+ i2c@f9923000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ charger: bq24192@6b {
+ compatible = "ti,bq24192";
+ reg = <0x6b>;
+ interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+ omit-battery-class;
+
+ usb_otg_vbus: usb-otg-vbus { };
+ };
+ };
+
+ i2c@f9924000 {
+ status = "ok";
+
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ synaptics@70 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x70>;
+
+ interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+ };
+
+ i2c@f9925000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ avago_apds993@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+ interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l17>;
+ vddio-supply = <&pm8941_lvs1>;
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <0>;
+ };
+ };
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ extcon = <&charger>, <&usb_id>;
+ vbus-supply = <&usb_otg_vbus>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
+
+ mdss@fd900000 {
+ status = "ok";
+
+ mdp@fd900000 {
+ status = "ok";
+ };
+
+ dsi@fd922800 {
+ status = "ok";
+
+ vdda-supply = <&pm8941_l2>;
+ vdd-supply = <&pm8941_lvs3>;
+ vddio-supply = <&pm8941_l12>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "lg,acx467akm-7";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ dsi-phy@fd922a00 {
+ status = "ok";
+
+ vddio-supply = <&pm8941_l12>;
+ };
+ };
};
&spmi_bus {
@@ -289,6 +705,29 @@
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
+
+ wlan_sleep_clk_pin: wl-sleep-clk {
+ pins = "gpio16";
+ function = "func2";
+
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_regulator_pin: wl-reg-active {
+ pins = "gpio17";
+ function = "normal";
+
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ otg {
+ gpio-hog;
+ gpios = <35 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "otg-gpio";
+ };
};
};
};
--
Gitblit v1.6.2