From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 21 ++++++++-------------
1 files changed, 8 insertions(+), 13 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/kernel/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 497bb06..4e6c50d 100644
--- a/kernel/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/kernel/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -93,9 +93,8 @@
vdd-supply = <&pm8058_l14>; // 2.85V
aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
capella,aset-resistance-ohms = <100000>;
- /* GPIO34 has interrupt 225 on the PM8058 */
/* Trig on both edges - getting close or far away */
- interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
/* MPP05 analog input to the XOADC */
io-channels = <&xoadc 0x00 0x05>;
io-channel-names = "aout";
@@ -515,9 +514,8 @@
ak8975@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
- /* FIXME: GPIO33 has interrupt 224 on the PM8058 */
- interrupt-parent = <&pm8058>;
- interrupts = <224 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&pm8058_gpio>;
+ interrupts = <33 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&dragon_ak8975_gpios>;
vid-supply = <&pm8058_lvs0>; // 1.8V
@@ -526,9 +524,8 @@
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
- /* FIXME: GPIO16 has interrupt 207 on the PM8058 */
- interrupt-parent = <&pm8058>;
- interrupts = <207 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&pm8058_gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&dragon_bmp085_gpios>;
@@ -539,12 +536,11 @@
compatible = "invensense,mpu3050";
reg = <0x68>;
/*
- * GPIO17 has interrupt 208 on the
- * PM8058, it is pulled high by a 10k
+ * GPIO17 is pulled high by a 10k
* resistor to VLOGIC so needs to be
* active low/falling edge.
*/
- interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&dragon_mpu3050_gpios>;
vlogic-supply = <&pm8058_lvs0>; // 1.8V
@@ -589,11 +585,10 @@
compatible = "smsc,lan9221", "smsc,lan9115";
reg = <2 0x0 0x100>;
/*
- * GPIO7 has interrupt 198 on the PM8058
* The second interrupt is the PME interrupt
* for network wakeup, connected to the TLMM.
*/
- interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>,
+ interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
<&tlmm 29 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
vdd33a-supply = <&dragon_veth>;
--
Gitblit v1.6.2