From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/meson8b.dtsi | 403 ++++++++++++++++++++++++++++++++++++++++++++++++---------
1 files changed, 336 insertions(+), 67 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/meson8b.dtsi b/kernel/arch/arm/boot/dts/meson8b.dtsi
index 4293047..af2454c 100644
--- a/kernel/arch/arm/boot/dts/meson8b.dtsi
+++ b/kernel/arch/arm/boot/dts/meson8b.dtsi
@@ -1,51 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
#include "meson.dtsi"
@@ -62,6 +24,8 @@
reg = <0x200>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
};
cpu1: cpu@201 {
@@ -71,6 +35,8 @@
reg = <0x201>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
};
cpu2: cpu@202 {
@@ -80,6 +46,8 @@
reg = <0x202>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
};
cpu3: cpu@203 {
@@ -89,6 +57,92 @@
reg = <0x203>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
+ };
+ };
+
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-96000000 {
+ opp-hz = /bits/ 64 <96000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-504000000 {
+ opp-hz = /bits/ 64 <504000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1488000000 {
+ opp-hz = /bits/ 64 <1488000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-microvolt = <1140000>;
+ };
+ };
+
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-255000000 {
+ opp-hz = /bits/ 64 <255000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-364285714 {
+ opp-hz = /bits/ 64 <364285714>;
+ opp-microvolt = <1100000>;
+ };
+ opp-425000000 {
+ opp-hz = /bits/ 64 <425000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-637500000 {
+ opp-hz = /bits/ 64 <637500000>;
+ opp-microvolt = <1100000>;
+ turbo-mode;
};
};
@@ -113,9 +167,61 @@
};
};
- scu@c4300000 {
- compatible = "arm,cortex-a5-scu";
- reg = <0xc4300000 0x100>;
+ mmcbus: bus@c8000000 {
+ compatible = "simple-bus";
+ reg = <0xc8000000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc8000000 0x8000>;
+
+ ddr_clkc: clock-controller@400 {
+ compatible = "amlogic,meson8b-ddr-clkc";
+ reg = <0x400 0x20>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
+ dmcbus: bus@6000 {
+ compatible = "simple-bus";
+ reg = <0x6000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,meson8b-canvas",
+ "amlogic,canvas";
+ reg = <0x48 0x14>;
+ };
+ };
+ };
+
+ apb: bus@d0000000 {
+ compatible = "simple-bus";
+ reg = <0xd0000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000000 0x200000>;
+
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson8b-mali", "arm,mali-450";
+ reg = <0xc0000 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1";
+ resets = <&reset RESET_MALI>;
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ };
};
}; /* end of / */
@@ -146,6 +252,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -153,19 +260,13 @@
mux {
groups = "remote_input";
function = "remote";
+ bias-disable;
};
};
};
};
&cbus {
- clkc: clock-controller@4000 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x400>;
- };
-
reset: reset-controller@4404 {
compatible = "amlogic,meson8b-reset";
reg = <0x4404 0x9c>;
@@ -182,6 +283,11 @@
reg = <0x86c0 0x10>;
#pwm-cells = <3>;
status = "disabled";
+ };
+
+ clock-measure@8758 {
+ compatible = "amlogic,meson8b-clk-measure";
+ reg = <0x8758 0x1c>;
};
pinctrl_cbus: pinctrl@9880 {
@@ -220,6 +326,31 @@
"eth_rxd3",
"eth_rxd2";
function = "ethernet";
+ bias-disable;
+ };
+ };
+
+ eth_rmii_pins: eth-rmii {
+ mux {
+ groups = "eth_tx_en",
+ "eth_txd1_0",
+ "eth_txd0_0",
+ "eth_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd1",
+ "eth_rxd0",
+ "eth_mdio_en",
+ "eth_mdc";
+ function = "ethernet";
+ bias-disable;
+ };
+ };
+
+ i2c_a_pins: i2c-a {
+ mux {
+ groups = "i2c_sda_a", "i2c_sck_a";
+ function = "i2c_a";
+ bias-disable;
};
};
@@ -228,6 +359,51 @@
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
"sd_d3_b", "sd_clk_b", "sd_cmd_b";
function = "sd_b";
+ bias-disable;
+ };
+ };
+
+ sdxc_c_pins: sdxc-c {
+ mux {
+ groups = "sdxc_d0_c", "sdxc_d13_c",
+ "sdxc_d47_c", "sdxc_clk_c",
+ "sdxc_cmd_c";
+ function = "sdxc_c";
+ bias-pull-up;
+ };
+ };
+
+ pwm_c1_pins: pwm-c1 {
+ mux {
+ groups = "pwm_c1";
+ function = "pwm_c";
+ bias-disable;
+ };
+ };
+
+ pwm_d_pins: pwm-d {
+ mux {
+ groups = "pwm_d";
+ function = "pwm_d";
+ bias-disable;
+ };
+ };
+
+ uart_b0_pins: uart-b0 {
+ mux {
+ groups = "uart_tx_b0",
+ "uart_rx_b0";
+ function = "uart_b";
+ bias-disable;
+ };
+ };
+
+ uart_b0_cts_rts_pins: uart-b0-cts-rts {
+ mux {
+ groups = "uart_cts_b0",
+ "uart_rts_b0";
+ function = "uart_b";
+ bias-disable;
};
};
};
@@ -245,6 +421,11 @@
compatible = "amlogic,meson8b-efuse";
clocks = <&clkc CLKID_EFUSE>;
clock-names = "core";
+
+ temperature_calib: calib@1f4 {
+ /* only the upper two bytes are relevant */
+ reg = <0x1f4 0x4>;
+ };
};
ðmac {
@@ -255,17 +436,56 @@
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <2048>;
resets = <&reset RESET_ETHERNET>;
reset-names = "stmmaceth";
+
+ power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
};
&gpio_intc {
compatible = "amlogic,meson-gpio-intc",
"amlogic,meson8b-gpio-intc";
status = "okay";
+};
+
+&hhi {
+ clkc: clock-controller {
+ compatible = "amlogic,meson8b-clkc";
+ clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+ clock-names = "xtal", "ddr_pll";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson8b-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&pmu>;
+ resets = <&reset RESET_DBLK>,
+ <&reset RESET_PIC_DC>,
+ <&reset RESET_HDMI_APB>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_VENCI>,
+ <&reset RESET_VENCP>,
+ <&reset RESET_VDAC_4>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_RDMA>;
+ reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+ "venci", "vencp", "vdac", "vencl", "viu",
+ "venc", "rdma";
+ clocks = <&clkc CLKID_VPU>;
+ clock-names = "vpu";
+ assigned-clocks = <&clkc CLKID_VPU>;
+ assigned-clock-rates = <182142857>;
+ };
};
&hwrng {
@@ -295,6 +515,33 @@
arm,shared-override;
};
+&periph {
+ scu@0 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0x0 0x100>;
+ };
+
+ timer@200 {
+ compatible = "arm,cortex-a5-global-timer";
+ reg = <0x200 0x20>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&clkc CLKID_PERIPH>;
+
+ /*
+ * the arm_global_timer driver currently does not handle clock
+ * rate changes. Keep it disabled for now.
+ */
+ status = "disabled";
+ };
+
+ timer@600 {
+ compatible = "arm,cortex-a5-twd-timer";
+ reg = <0x600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&clkc CLKID_PERIPH>;
+ };
+};
+
&pwm_ab {
compatible = "amlogic,meson8b-pwm";
};
@@ -303,11 +550,28 @@
compatible = "amlogic,meson8b-pwm";
};
+&rtc {
+ compatible = "amlogic,meson8b-rtc";
+ resets = <&reset RESET_RTC>;
+};
+
&saradc {
compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
- clocks = <&clkc CLKID_XTAL>,
- <&clkc CLKID_SAR_ADC>;
+ clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
clock-names = "clkin", "core";
+ amlogic,hhi-sysctrl = <&hhi>;
+ nvmem-cells = <&temperature_calib>;
+ nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+ compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+ clocks = <&xtal>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_SDHC>;
+ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
};
&sdio {
@@ -316,28 +580,33 @@
clock-names = "core", "clkin";
};
+&timer_abcde {
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_A {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_B {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&uart_C {
- compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
- clock-names = "baud", "xtal", "pclk";
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
};
&usb0 {
--
Gitblit v1.6.2