From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 32 +++++++++++++++++++++++---------
1 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/kernel/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 2bc5162..5547916 100644
--- a/kernel/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/kernel/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
@@ -96,7 +93,7 @@
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -355,6 +352,12 @@
>;
};
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x10b0
+ >;
+ };
+
pinctrl_pwm1: pwm1grp-1 {
fsl,pins = <
/* blue LED */
@@ -387,15 +390,15 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1
>;
};
@@ -493,19 +496,30 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ reset-gpio-active-high;
+ status = "okay";
+};
+
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&pwm6 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
status = "okay";
--
Gitblit v1.6.2