From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/imx6qdl-apalis.dtsi | 147 ++++++++++++++++++++++++++-----------------------
1 files changed, 78 insertions(+), 69 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/kernel/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 05f07ea..a696873 100644
--- a/kernel/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/kernel/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
@@ -49,6 +13,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
@@ -147,20 +112,22 @@
};
&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_flexcan1_default>;
+ pinctrl-1 = <&pinctrl_flexcan1_sleep>;
status = "disabled";
};
&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_flexcan2_default>;
+ pinctrl-1 = <&pinctrl_flexcan2_sleep>;
status = "disabled";
};
/* Apalis SPI1 */
&ecspi1 {
- cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "disabled";
@@ -168,7 +135,7 @@
/* Apalis SPI2 */
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "disabled";
@@ -177,7 +144,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy>;
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
@@ -197,15 +164,18 @@
&hdmi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hdmi_ddc>;
+ pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
status = "disabled";
};
/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -215,8 +185,11 @@
*/
&i2c2 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pmic: pfuze100@8 {
@@ -313,6 +286,8 @@
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_module_3v3_audio>;
VDDIO-supply = <®_module_3v3>;
@@ -331,11 +306,17 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -345,16 +326,16 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
+ };
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
};
};
};
@@ -365,11 +346,11 @@
*/
&i2c3 {
clock-frequency = <100000>;
- pinctrl-names = "default", "recovery";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-1 = <&pinctrl_i2c3_recovery>;
- scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -392,6 +373,7 @@
};
&pwm4 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "disabled";
@@ -482,10 +464,6 @@
};
&iomuxc {
- /* pins used on module */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reset_moci>;
-
pinctrl_apalis_gpio1: gpio2io04grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
@@ -540,8 +518,6 @@
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
- /* SGTL5000 sys_mclk */
- MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
@@ -596,17 +572,30 @@
>;
};
- pinctrl_flexcan1: flexcan1grp {
+ pinctrl_flexcan1_default: flexcan1defgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
>;
};
- pinctrl_flexcan2: flexcan2grp {
+ pinctrl_flexcan1_sleep: flexcan1slpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
+ >;
+ };
+
+ pinctrl_flexcan2_default: flexcan2defgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+ pinctrl_flexcan2_sleep: flexcan2slpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
>;
};
@@ -643,10 +632,24 @@
>;
};
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
>;
};
@@ -657,7 +660,7 @@
>;
};
- pinctrl_i2c3_recovery: i2c3recoverygrp {
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
@@ -807,6 +810,12 @@
>;
};
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
--
Gitblit v1.6.2