From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/gemini.dtsi | 40 ++++++++++++++++++++++++++++++++++++++--
1 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/gemini.dtsi b/kernel/arch/arm/boot/dts/gemini.dtsi
index 4949951..07448c0 100644
--- a/kernel/arch/arm/boot/dts/gemini.dtsi
+++ b/kernel/arch/arm/boot/dts/gemini.dtsi
@@ -357,7 +357,7 @@
};
};
- ata@63000000 {
+ ide@63000000 {
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63000000 0x1000>;
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -366,9 +366,11 @@
clock-names = "PCLK";
sata = <&sata>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- ata@63400000 {
+ ide@63400000 {
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63400000 0x1000>;
interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -377,6 +379,8 @@
clock-names = "PCLK";
sata = <&sata>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
dma-controller@67000000 {
@@ -410,5 +414,37 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb@68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_USB0>;
+ clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+ clock-names = "PCLK";
+ /*
+ * This will claim pins for USB0 and USB1 at the same
+ * time as they are using some common pins. If you for
+ * some reason have a system using USB1 at 96000000 but
+ * NOT using USB0 at 68000000 you wll have to add the
+ * usb_default_pins to the USB controller at 96000000
+ * in your .dts for the board.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_default_pins>;
+ syscon = <&syscon>;
+ status = "disabled";
+ };
+
+ usb@69000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x69000000 0x1000>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_USB1>;
+ clocks = <&syscon GEMINI_CLK_GATE_USB1>;
+ clock-names = "PCLK";
+ syscon = <&syscon>;
+ status = "disabled";
+ };
};
};
--
Gitblit v1.6.2