From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/exynos3250-monk.dts | 20 ++++++++++++++++----
1 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/exynos3250-monk.dts b/kernel/arch/arm/boot/dts/exynos3250-monk.dts
index d343dc1..7e99e58 100644
--- a/kernel/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/kernel/arch/arm/boot/dts/exynos3250-monk.dts
@@ -26,7 +26,7 @@
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x1ff00000>;
+ reg = <0x40000000 0x1ff00000>;
};
firmware@205f000 {
@@ -57,7 +57,8 @@
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
@@ -121,11 +122,13 @@
cooling-maps {
map0 {
/* Correspond to 500MHz at freq_table */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Correspond to 200MHz at freq_table */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
@@ -161,6 +164,10 @@
status = "okay";
};
+&cmu {
+ clocks = <&xusbxti>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@@ -170,6 +177,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
--
Gitblit v1.6.2