From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/dm814x.dtsi | 401 +++++++++++++++++++++++++++++++++++++++++++--------------
1 files changed, 303 insertions(+), 98 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/dm814x.dtsi b/kernel/arch/arm/boot/dts/dm814x.dtsi
index 601c57a..7702e04 100644
--- a/kernel/arch/arm/boot/dts/dm814x.dtsi
+++ b/kernel/arch/arm/boot/dts/dm814x.dtsi
@@ -4,6 +4,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm814.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/dm814x.h>
@@ -222,6 +224,30 @@
#interrupt-cells = <2>;
};
+ gpio3: gpio@1ac000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ reg = <0x1ac000 0x2000>;
+ interrupts = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@1ae000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ reg = <0x1ae000 0x2000>;
+ interrupts = <62>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
i2c2: i2c@2a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
@@ -240,18 +266,72 @@
ti,spi-num-cs = <4>;
ti,hwmods = "mcspi1";
dmas = <&edma 16 0 &edma 17 0
- &edma 18 0 &edma 19 0>;
+ &edma 18 0 &edma 19 0
+ &edma 20 0 &edma 21 0
+ &edma 22 0 &edma 23 0>;
+
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: spi@1a0000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <125>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi2";
+ dmas = <&edma 42 0 &edma 43 0
+ &edma 44 0 &edma 45 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
- timer1: timer@2e000 {
- compatible = "ti,dm814-timer";
- reg = <0x2e000 0x2000>;
- interrupts = <67>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
+ /* Board must configure dmas with edma_xbar for EDMA */
+ mcspi3: spi@1a2000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <126>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi3";
+ };
+
+ mcspi4: spi@1a4000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <127>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi4";
+ };
+
+ timer1_target: target-module@2e000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
clocks = <&timer1_fck>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,am335x-timer-1ms";
+ reg = <0x0 0x400>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ };
};
uart1: uart@20000 {
@@ -284,13 +364,29 @@
dma-names = "tx", "rx";
};
- timer2: timer@40000 {
- compatible = "ti,dm814-timer";
- reg = <0x40000 0x2000>;
- interrupts = <68>;
- ti,hwmods = "timer2";
+ timer2_target: target-module@40000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
clocks = <&timer2_fck>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,dm814-timer";
+ reg = <0 0x1000>;
+ interrupts = <68>;
+ clocks = <&timer2_fck>;
+ clock-names = "fck";
+ };
};
timer3: timer@42000 {
@@ -342,6 +438,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x800>;
+
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,dm814-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <1>;
+ };
scm_clocks: clocks {
#address-cells = <1>;
@@ -451,53 +553,123 @@
reg = <0x47810000 0x1000>;
};
- edma: edma@49000000 {
- compatible = "ti,edma3-tpcc";
- ti,hwmods = "tpcc";
- reg = <0x49000000 0x10000>;
- reg-names = "edma3_cc";
- interrupts = <12 13 14>;
- interrupt-names = "edma3_ccint", "edma3_mperr",
- "edma3_ccerrint";
- dma-requests = <64>;
- #dma-cells = <2>;
+ target-module@49000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49000000 0x4>;
+ reg-names = "rev";
+ clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49000000 0x10000>;
- ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
- <&edma_tptc2 3>, <&edma_tptc3 0>;
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <12 13 14>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
- ti,edma-memcpy-channels = <20 21>;
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
};
- edma_tptc0: tptc@49800000 {
- compatible = "ti,edma3-tptc";
- ti,hwmods = "tptc0";
- reg = <0x49800000 0x100000>;
- interrupts = <112>;
- interrupt-names = "edma3_tcerrint";
+ target-module@49800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49800000 0x4>,
+ <0x49800010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49800000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
};
- edma_tptc1: tptc@49900000 {
- compatible = "ti,edma3-tptc";
- ti,hwmods = "tptc1";
- reg = <0x49900000 0x100000>;
- interrupts = <113>;
- interrupt-names = "edma3_tcerrint";
+ target-module@49900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49900000 0x4>,
+ <0x49900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49900000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
};
- edma_tptc2: tptc@49a00000 {
- compatible = "ti,edma3-tptc";
- ti,hwmods = "tptc2";
- reg = <0x49a00000 0x100000>;
- interrupts = <114>;
- interrupt-names = "edma3_tcerrint";
+ target-module@49a00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49a00000 0x4>,
+ <0x49a00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49a00000 0x100000>;
+
+ edma_tptc2: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
+ };
};
- edma_tptc3: tptc@49b00000 {
- compatible = "ti,edma3-tptc";
- ti,hwmods = "tptc3";
- reg = <0x49b00000 0x100000>;
- interrupts = <115>;
- interrupt-names = "edma3_tcerrint";
+ target-module@49b00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49b00000 0x4>,
+ <0x49b00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49b00000 0x100000>;
+
+ edma_tptc3: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <115>;
+ interrupt-names = "edma3_tcerrint";
+ };
};
/* See TRM "Table 1-318. L4HS Instance Summary" */
@@ -506,60 +678,73 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a000000 0x1b4040>;
- };
- /* REVISIT: Move to live under l4hs once driver is fixed */
- mac: ethernet@4a100000 {
- compatible = "ti,cpsw";
- ti,hwmods = "cpgmac0";
- clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
- clock-names = "fck", "cpts";
- cpdma_channels = <8>;
- ale_entries = <1024>;
- bd_ram_size = <0x2000>;
- mac_control = <0x20>;
- slaves = <2>;
- active_slave = <0>;
- cpts_clock_mult = <0x80000000>;
- cpts_clock_shift = <29>;
- reg = <0x4a100000 0x800
- 0x4a100900 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- /*
- * c0_rx_thresh_pend
- * c0_rx_pend
- * c0_tx_pend
- * c0_misc_pend
- */
- interrupts = <40 41 42 43>;
- ranges;
- syscon = <&scm_conf>;
-
- davinci_mdio: mdio@4a100800 {
- compatible = "ti,davinci_mdio";
+ target-module@100000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x100900 0x4>,
+ <0x100908 0x4>,
+ <0x100904 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <0>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,syss-mask = <1>;
+ clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "davinci_mdio";
- bus_freq = <1000000>;
- reg = <0x4a100800 0x100>;
- };
+ #size-cells = <1>;
+ ranges = <0 0x100000 0x8000>;
- cpsw_emac0: slave@4a100200 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- };
+ mac: ethernet@0 {
+ compatible = "ti,cpsw";
+ clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+ clock-names = "fck", "cpts";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0 0x800>,
+ <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * c0_rx_thresh_pend
+ * c0_rx_pend
+ * c0_tx_pend
+ * c0_misc_pend
+ */
+ interrupts = <40 41 42 43>;
+ ranges = <0 0 0x8000>;
+ syscon = <&scm_conf>;
- cpsw_emac1: slave@4a100300 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- };
+ davinci_mdio: mdio@800 {
+ compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x800 0x100>;
+ };
- phy_sel: cpsw-phy-sel@48140650 {
- compatible = "ti,am3352-cpsw-phy-sel";
- reg= <0x48140650 0x4>;
- reg-names = "gmii-sel";
+ cpsw_emac0: slave@200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+ };
+
+ cpsw_emac1: slave@300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
+ };
+ };
};
};
@@ -582,3 +767,23 @@
};
#include "dm814x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&devosc_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&devosc_ck>;
+ };
+};
--
Gitblit v1.6.2