From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/at91sam9g25ek.dts | 96 +++++++++++++++++++++++-------------------------
1 files changed, 46 insertions(+), 50 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91sam9g25ek.dts b/kernel/arch/arm/boot/dts/at91sam9g25ek.dts
index 31fecc2..61b0bdb 100644
--- a/kernel/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/kernel/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
*
* Copyright (C) 2012 Atmel,
* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
/dts-v1/;
#include "at91sam9g25.dtsi"
@@ -13,57 +12,54 @@
/ {
model = "Atmel AT91SAM9G25-EK";
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
- ahb {
- apb {
- spi0: spi@f0000000 {
- status = "disabled";
- };
+&i2c0 {
+ camera@30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ assigned-clock-rates = <25000000>;
+ status = "okay";
- mmc1: mmc@f000c000 {
- status = "disabled";
- };
-
- i2c0: i2c@f8010000 {
- ov2640: camera@30 {
- compatible = "ovti,ov2640";
- reg = <0x30>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
- resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
- pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
- clocks = <&pck0>;
- clock-names = "xvclk";
- assigned-clocks = <&pck0>;
- assigned-clock-rates = <25000000>;
- status = "okay";
-
- port {
- ov2640_0: endpoint {
- remote-endpoint = <&isi_0>;
- bus-width = <8>;
- };
- };
- };
- };
-
- macb0: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- isi: isi@f8048000 {
- status = "okay";
- port {
- isi_0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&ov2640_0>;
- bus-width = <8>;
- vsync-active = <1>;
- hsync-active = <1>;
- };
- };
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
};
};
};
};
+
+&isi {
+ status = "okay";
+
+ port {
+ isi_0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
+ };
+ };
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&spi0 {
+ status = "disabled";
+};
--
Gitblit v1.6.2