From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/at91-cosino.dtsi | 213 ++++++++++++++++++++++++++---------------------------
1 files changed, 105 insertions(+), 108 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91-cosino.dtsi b/kernel/arch/arm/boot/dts/at91-cosino.dtsi
index 295a5a4..ee0f5da 100644
--- a/kernel/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/kernel/arch/arm/boot/dts/at91-cosino.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91-cosino.dtsi - Device Tree file for Cosino core module
*
@@ -7,8 +8,6 @@
* Derived from at91sam9x5ek.dtsi by:
* Copyright (C) 2012 Atmel,
* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
#include "at91sam9g35.dtsi"
@@ -21,7 +20,7 @@
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
@@ -34,122 +33,120 @@
clock-frequency = <12000000>;
};
};
+};
- ahb {
- apb {
- tcb0: timer@f8008000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
+&adc0 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&ebi {
+ pinctrl-0 = <&pinctrl_ebi_addr_nand
+ &pinctrl_ebi_data_0_7>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand-controller {
+ pinctrl-0 = <&pinctrl_nand_oe_we
+ &pinctrl_nand_cs
+ &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
};
- timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0x80000>;
};
- };
- mmc0: mmc@f0008000 {
- pinctrl-0 = <
- &pinctrl_board_mmc0
- &pinctrl_mmc0_slot0_clk_cmd_dat0
- &pinctrl_mmc0_slot0_dat1_3>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+ ubootenv@c0000 {
+ label = "U-Boot Env";
+ reg = <0xc0000 0x140000>;
};
- };
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@f801c000 {
- status = "okay";
- };
-
- i2c0: i2c@f8010000 {
- status = "okay";
- };
-
- adc0: adc@f804c000 {
- atmel,adc-ts-wires = <4>;
- atmel,adc-ts-pressure-threshold = <10000>;
- status = "okay";
- };
-
- pinctrl@fffff400 {
- mmc0 {
- pinctrl_board_mmc0: mmc0-board {
- atmel,pins =
- <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
- };
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
};
- };
- watchdog@fffffe40 {
- status = "okay";
- };
- };
-
- ebi: ebi@10000000 {
- pinctrl-0 = <&pinctrl_ebi_addr_nand
- &pinctrl_ebi_data_0_7>;
- pinctrl-names = "default";
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
- pinctrl-0 = <&pinctrl_nand_oe_we
- &pinctrl_nand_cs
- &pinctrl_nand_rb>;
- pinctrl-names = "default";
-
- nand@3 {
- reg = <0x3 0x0 0x800000>;
- rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- at91bootstrap@0 {
- label = "at91bootstrap";
- reg = <0x0 0x40000>;
- };
-
- uboot@40000 {
- label = "u-boot";
- reg = <0x40000 0x80000>;
- };
-
- ubootenv@c0000 {
- label = "U-Boot Env";
- reg = <0xc0000 0x140000>;
- };
-
- kernel@200000 {
- label = "kernel";
- reg = <0x200000 0x600000>;
- };
-
- rootfs@800000 {
- label = "rootfs";
- reg = <0x800000 0x0f800000>;
- };
- };
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
};
};
};
};
};
+
+&i2c0 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinctrl {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
+ };
+ };
+};
+
+&tcb0 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+&usart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
Gitblit v1.6.2