From f9004dbfff8a3fbbd7e2a88c8a4327c7f2f8e5b2 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 01:04:47 +0000
Subject: [PATCH] add driver 5G
---
kernel/arch/arm/boot/dts/at91-ariag25.dts | 261 +++++++++++++++++++++++++--------------------------
1 files changed, 127 insertions(+), 134 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91-ariag25.dts b/kernel/arch/arm/boot/dts/at91-ariag25.dts
index e3e14b7..713d18f 100644
--- a/kernel/arch/arm/boot/dts/at91-ariag25.dts
+++ b/kernel/arch/arm/boot/dts/at91-ariag25.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
*
* Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
* Robert Nelson <robertcnelson@gmail.com>
- *
- * Licensed under GPLv2 or later.
*/
/dts-v1/;
#include "at91sam9g25.dtsi"
@@ -15,11 +14,6 @@
"atmel,at91sam9x5", "atmel,at91sam9";
aliases {
- serial0 = &dbgu;
- serial1 = &usart0;
- serial2 = &usart1;
- serial3 = &usart2;
- serial4 = &usart3;
serial5 = &uart0;
serial6 = &uart1;
};
@@ -28,7 +22,7 @@
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
};
- memory {
+ memory@20000000 {
/* 128 MB, change this for 256 MB revision */
reg = <0x20000000 0x8000000>;
};
@@ -40,132 +34,6 @@
main_xtal {
clock-frequency = <12000000>;
- };
- };
-
- ahb {
- apb {
- mmc0: mmc@f0008000 {
- /* N.B. Aria has no SD card detect (CD), assumed present */
-
- pinctrl-0 = <
- &pinctrl_mmc0_slot0_clk_cmd_dat0
- &pinctrl_mmc0_slot0_dat1_3>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- tcb0: timer@f8008000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
- };
-
- timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
- };
- };
-
- i2c0: i2c@f8010000 {
- status = "okay";
- };
-
- i2c1: i2c@f8014000 {
- status = "okay";
- };
-
- /* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
-
- usart0: serial@f801c000 {
- pinctrl-0 = <&pinctrl_usart0
- &pinctrl_usart0_rts
- &pinctrl_usart0_cts>;
- status = "okay";
- };
-
- usart1: serial@f8020000 {
- pinctrl-0 = <&pinctrl_usart1
- /* &pinctrl_usart1_rts */
- /* &pinctrl_usart1_cts */
- >;
- status = "okay";
- };
-
- usart2: serial@f8024000 {
- /* cannot activate RTS2+CTS2, clash with
- * ethernet on PB0 and PB1 */
- pinctrl-0 = <&pinctrl_usart2>;
- status = "okay";
- };
-
- usart3: serial@f8028000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xf8028000 0x200>;
- interrupts = <8 4 5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usart3
- /* &pinctrl_usart3_rts */
- /* &pinctrl_usart3_cts */
- >;
- status = "okay";
- };
-
- macb0: ethernet@f802c000 {
- phy-mode = "rmii";
- /*
- * following can be overwritten by bootloader:
- * for example u-boot 'ftd set' command
- */
- local-mac-address = [00 00 00 00 00 00];
- status = "okay";
- };
-
- /*
- * UART0/1 pins are marked as GPIO on
- * Aria documentation.
- * Change to "okay" if you need additional serial ports
- */
- uart0: serial@f8040000 {
- status = "disabled";
- };
-
- uart1: serial@f8044000 {
- status = "disabled";
- };
-
- adc0: adc@f804c000 {
- status = "okay";
- atmel,adc-channels-used = <0xf>;
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- pinctrl@fffff400 {
- w1_0 {
- pinctrl_w1_0: w1_0-0 {
- atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
- };
- };
- };
-
- rtc@fffffeb0 {
- status = "okay";
- };
- };
-
- usb0: ohci@600000 {
- status = "okay";
- num-ports = <3>;
- };
-
- usb1: ehci@700000 {
- status = "okay";
};
};
@@ -188,3 +56,128 @@
pinctrl-0 = <&pinctrl_w1_0>;
};
};
+
+&adc0 {
+ status = "okay";
+ atmel,adc-channels-used = <0xf>;
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+&macb0 {
+ phy-mode = "rmii";
+ /*
+ * following can be overwritten by bootloader:
+ * for example u-boot 'ftd set' command
+ */
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+};
+
+
+&mmc0 {
+ /* N.B. Aria has no SD card detect (CD), assumed present */
+
+ pinctrl-0 = <
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl {
+ w1_0 {
+ pinctrl_w1_0: w1_0-0 {
+ atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&tcb0 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+/*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
+&uart0 {
+ status = "disabled";
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&usart0 {
+ pinctrl-0 = <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts>;
+ status = "okay";
+};
+
+&usart1 {
+ pinctrl-0 = <&pinctrl_usart1
+ /* &pinctrl_usart1_rts */
+ /* &pinctrl_usart1_cts */
+ >;
+ status = "okay";
+};
+
+&usart2 {
+ /* cannot activate RTS2+CTS2, clash with
+ * ethernet on PB0 and PB1 */
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "okay";
+};
+
+&usart3 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x200>;
+ interrupts = <8 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3
+ /* &pinctrl_usart3_rts */
+ /* &pinctrl_usart3_cts */
+ >;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ num-ports = <3>;
+};
+
+&usb1 {
+ status = "okay";
+};
--
Gitblit v1.6.2