From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800
---
kernel/drivers/video/backlight/bd6107.c | 38 +++++++++++++++++++-------------------
1 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/kernel/drivers/video/backlight/bd6107.c b/kernel/drivers/video/backlight/bd6107.c
index fdb2f7e..5c67ef8 100644
--- a/kernel/drivers/video/backlight/bd6107.c
+++ b/kernel/drivers/video/backlight/bd6107.c
@@ -1,20 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* ROHM Semiconductor BD6107 LED Driver
*
* Copyright (C) 2013 Ideas on board SPRL
*
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/platform_data/bd6107.h>
@@ -74,6 +71,7 @@
struct i2c_client *client;
struct backlight_device *backlight;
struct bd6107_platform_data *pdata;
+ struct gpio_desc *reset;
};
static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data)
@@ -84,12 +82,7 @@
static int bd6107_backlight_update_status(struct backlight_device *backlight)
{
struct bd6107 *bd = bl_get_data(backlight);
- int brightness = backlight->props.brightness;
-
- if (backlight->props.power != FB_BLANK_UNBLANK ||
- backlight->props.fb_blank != FB_BLANK_UNBLANK ||
- backlight->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
- brightness = 0;
+ int brightness = backlight_get_brightness(backlight);
if (brightness) {
bd6107_write(bd, BD6107_PORTSEL, BD6107_PORTSEL_LEDM(2) |
@@ -97,9 +90,10 @@
bd6107_write(bd, BD6107_MAINCNT1, brightness);
bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1);
} else {
- gpio_set_value(bd->pdata->reset, 0);
+ /* Assert the reset line (gpiolib will handle active low) */
+ gpiod_set_value(bd->reset, 1);
msleep(24);
- gpio_set_value(bd->pdata->reset, 1);
+ gpiod_set_value(bd->reset, 0);
}
return 0;
@@ -110,7 +104,7 @@
{
struct bd6107 *bd = bl_get_data(backlight);
- return bd->pdata->fbdev == NULL || bd->pdata->fbdev == info->dev;
+ return bd->pdata->fbdev == NULL || bd->pdata->fbdev == info->device;
}
static const struct backlight_ops bd6107_backlight_ops = {
@@ -128,8 +122,8 @@
struct bd6107 *bd;
int ret;
- if (pdata == NULL || !pdata->reset) {
- dev_err(&client->dev, "No reset GPIO in platform data\n");
+ if (pdata == NULL) {
+ dev_err(&client->dev, "No platform data\n");
return -EINVAL;
}
@@ -147,10 +141,16 @@
bd->client = client;
bd->pdata = pdata;
- ret = devm_gpio_request_one(&client->dev, pdata->reset,
- GPIOF_DIR_OUT | GPIOF_INIT_LOW, "reset");
- if (ret < 0) {
+ /*
+ * Request the reset GPIO line with GPIOD_OUT_HIGH meaning asserted,
+ * so in the machine descriptor table (or other hardware description),
+ * the line should be flagged as active low so this will assert
+ * the reset.
+ */
+ bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(bd->reset)) {
dev_err(&client->dev, "unable to request reset GPIO\n");
+ ret = PTR_ERR(bd->reset);
return ret;
}
--
Gitblit v1.6.2