From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800
---
kernel/drivers/usb/host/ohci-sm501.c | 52 +++++++++++++++++++++++-----------------------------
1 files changed, 23 insertions(+), 29 deletions(-)
diff --git a/kernel/drivers/usb/host/ohci-sm501.c b/kernel/drivers/usb/host/ohci-sm501.c
index 0a39dc5..b91d50d 100644
--- a/kernel/drivers/usb/host/ohci-sm501.c
+++ b/kernel/drivers/usb/host/ohci-sm501.c
@@ -49,7 +49,7 @@
* generic hardware linkage
*/
.irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM,
+ .flags = HCD_USB11 | HCD_MEMORY,
/*
* basic lifecycle operations
@@ -110,41 +110,18 @@
goto err0;
}
- /* The sm501 chip is equipped with local memory that may be used
- * by on-chip devices such as the video controller and the usb host.
- * This driver uses dma_declare_coherent_memory() to make sure
- * usb allocations with dma_alloc_coherent() allocate from
- * this local memory. The dma_handle returned by dma_alloc_coherent()
- * will be an offset starting from 0 for the first local memory byte.
- *
- * So as long as data is allocated using dma_alloc_coherent() all is
- * fine. This is however not always the case - buffers may be allocated
- * using kmalloc() - so the usb core needs to be told that it must copy
- * data into our local memory if the buffers happen to be placed in
- * regular memory. The HCD_LOCAL_MEM flag does just that.
- */
-
- retval = dma_declare_coherent_memory(dev, mem->start,
- mem->start - mem->parent->start,
- resource_size(mem),
- DMA_MEMORY_EXCLUSIVE);
- if (retval) {
- dev_err(dev, "cannot declare coherent memory\n");
- goto err1;
- }
-
/* allocate, reserve and remap resources for registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(dev, "no resource definition for registers\n");
retval = -ENOENT;
- goto err2;
+ goto err1;
}
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
- goto err2;
+ goto err1;
}
hcd->rsrc_start = res->start;
@@ -165,6 +142,26 @@
ohci_hcd_init(hcd_to_ohci(hcd));
+ /* The sm501 chip is equipped with local memory that may be used
+ * by on-chip devices such as the video controller and the usb host.
+ * This driver uses genalloc so that usb allocations with
+ * gen_pool_dma_alloc() allocate from this local memory. The dma_handle
+ * returned by gen_pool_dma_alloc() will be an offset starting from 0
+ * for the first local memory byte.
+ *
+ * So as long as data is allocated using gen_pool_dma_alloc() all is
+ * fine. This is however not always the case - buffers may be allocated
+ * using kmalloc() - so the usb core needs to be told that it must copy
+ * data into our local memory if the buffers happen to be placed in
+ * regular memory. A non-null hcd->localmem_pool initialized by the
+ * the call to usb_hcd_setup_local_mem() below does just that.
+ */
+
+ retval = usb_hcd_setup_local_mem(hcd, mem->start,
+ mem->start - mem->parent->start,
+ resource_size(mem));
+ if (retval < 0)
+ goto err5;
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval)
goto err5;
@@ -182,8 +179,6 @@
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err3:
usb_put_hcd(hcd);
-err2:
- dma_release_declared_memory(dev);
err1:
release_mem_region(mem->start, resource_size(mem));
err0:
@@ -199,7 +194,6 @@
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- dma_release_declared_memory(&pdev->dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (mem)
release_mem_region(mem->start, resource_size(mem));
--
Gitblit v1.6.2