From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800
---
kernel/drivers/iio/adc/stm32-adc-core.c | 499 ++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 383 insertions(+), 116 deletions(-)
diff --git a/kernel/drivers/iio/adc/stm32-adc-core.c b/kernel/drivers/iio/adc/stm32-adc-core.c
index 38eb966..20fc867 100644
--- a/kernel/drivers/iio/adc/stm32-adc-core.c
+++ b/kernel/drivers/iio/adc/stm32-adc-core.c
@@ -14,27 +14,43 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include "stm32-adc-core.h"
+#define STM32_ADC_CORE_SLEEP_DELAY_MS 2000
+
+/* SYSCFG registers */
+#define STM32MP1_SYSCFG_PMCSETR 0x04
+#define STM32MP1_SYSCFG_PMCCLRR 0x44
+
+/* SYSCFG bit fields */
+#define STM32MP1_SYSCFG_ANASWVDD_MASK BIT(9)
+
+/* SYSCFG capability flags */
+#define HAS_VBOOSTER BIT(0)
+#define HAS_ANASWVDD BIT(1)
+
/**
- * stm32_adc_common_regs - stm32 common registers, compatible dependent data
+ * struct stm32_adc_common_regs - stm32 common registers
* @csr: common status register offset
- * @eoc1: adc1 end of conversion flag in @csr
- * @eoc2: adc2 end of conversion flag in @csr
- * @eoc3: adc3 end of conversion flag in @csr
+ * @ccr: common control register offset
+ * @eoc_msk: array of eoc (end of conversion flag) masks in csr for adc1..n
+ * @ovr_msk: array of ovr (overrun flag) masks in csr for adc1..n
* @ier: interrupt enable register offset for each adc
* @eocie_msk: end of conversion interrupt enable mask in @ier
*/
struct stm32_adc_common_regs {
u32 csr;
- u32 eoc1_msk;
- u32 eoc2_msk;
- u32 eoc3_msk;
+ u32 ccr;
+ u32 eoc_msk[STM32_ADC_MAX_ADCS];
+ u32 ovr_msk[STM32_ADC_MAX_ADCS];
u32 ier;
u32 eocie_msk;
};
@@ -42,15 +58,21 @@
struct stm32_adc_priv;
/**
- * stm32_adc_priv_cfg - stm32 core compatible configuration data
+ * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
* @regs: common registers for all instances
* @clk_sel: clock selection routine
* @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
+ * @has_syscfg: SYSCFG capability flags
+ * @num_irqs: number of interrupt lines
+ * @num_adcs: maximum number of ADC instances in the common registers
*/
struct stm32_adc_priv_cfg {
const struct stm32_adc_common_regs *regs;
int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
u32 max_clk_rate_hz;
+ unsigned int has_syscfg;
+ unsigned int num_irqs;
+ unsigned int num_adcs;
};
/**
@@ -59,18 +81,34 @@
* @domain: irq domain reference
* @aclk: clock reference for the analog circuitry
* @bclk: bus clock common for all ADCs, depends on part used
+ * @max_clk_rate: desired maximum clock rate
+ * @booster: booster supply reference
+ * @vdd: vdd supply reference
+ * @vdda: vdda analog supply reference
* @vref: regulator reference
+ * @vdd_uv: vdd supply voltage (microvolts)
+ * @vdda_uv: vdda supply voltage (microvolts)
* @cfg: compatible configuration data
* @common: common data for all ADC instances
+ * @ccr_bak: backup CCR in low power mode
+ * @syscfg: reference to syscon, system control registers
*/
struct stm32_adc_priv {
int irq[STM32_ADC_MAX_ADCS];
struct irq_domain *domain;
struct clk *aclk;
struct clk *bclk;
+ u32 max_clk_rate;
+ struct regulator *booster;
+ struct regulator *vdd;
+ struct regulator *vdda;
struct regulator *vref;
+ int vdd_uv;
+ int vdda_uv;
const struct stm32_adc_priv_cfg *cfg;
struct stm32_adc_common common;
+ u32 ccr_bak;
+ struct regmap *syscfg;
};
static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
@@ -83,6 +121,7 @@
/**
* stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * @pdev: platform device
* @priv: stm32 ADC core private data
* Select clock prescaler used for analog conversions, before using ADC.
*/
@@ -106,7 +145,7 @@
}
for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
- if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
+ if ((rate / stm32f4_pclk_div[i]) <= priv->max_clk_rate)
break;
}
if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
@@ -195,7 +234,7 @@
if (ckmode)
continue;
- if ((rate / div) <= priv->cfg->max_clk_rate_hz)
+ if ((rate / div) <= priv->max_clk_rate)
goto out;
}
}
@@ -215,7 +254,7 @@
if (!ckmode)
continue;
- if ((rate / div) <= priv->cfg->max_clk_rate_hz)
+ if ((rate / div) <= priv->max_clk_rate)
goto out;
}
@@ -242,9 +281,9 @@
/* STM32F4 common registers definitions */
static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
.csr = STM32F4_ADC_CSR,
- .eoc1_msk = STM32F4_EOC1,
- .eoc2_msk = STM32F4_EOC2,
- .eoc3_msk = STM32F4_EOC3,
+ .ccr = STM32F4_ADC_CCR,
+ .eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3},
+ .ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3},
.ier = STM32F4_ADC_CR1,
.eocie_msk = STM32F4_EOCIE,
};
@@ -252,8 +291,9 @@
/* STM32H7 common registers definitions */
static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
.csr = STM32H7_ADC_CSR,
- .eoc1_msk = STM32H7_EOC_MST,
- .eoc2_msk = STM32H7_EOC_SLV,
+ .ccr = STM32H7_ADC_CCR,
+ .eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV},
+ .ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV},
.ier = STM32H7_ADC_IER,
.eocie_msk = STM32H7_EOCIE,
};
@@ -277,6 +317,7 @@
{
struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
+ int i;
u32 status;
chained_irq_enter(chip, desc);
@@ -294,17 +335,12 @@
* before invoking the interrupt handler (e.g. call ISR only for
* IRQ-enabled ADCs).
*/
- if (status & priv->cfg->regs->eoc1_msk &&
- stm32_adc_eoc_enabled(priv, 0))
- generic_handle_irq(irq_find_mapping(priv->domain, 0));
-
- if (status & priv->cfg->regs->eoc2_msk &&
- stm32_adc_eoc_enabled(priv, 1))
- generic_handle_irq(irq_find_mapping(priv->domain, 1));
-
- if (status & priv->cfg->regs->eoc3_msk &&
- stm32_adc_eoc_enabled(priv, 2))
- generic_handle_irq(irq_find_mapping(priv->domain, 2));
+ for (i = 0; i < priv->cfg->num_adcs; i++) {
+ if ((status & priv->cfg->regs->eoc_msk[i] &&
+ stm32_adc_eoc_enabled(priv, i)) ||
+ (status & priv->cfg->regs->ovr_msk[i]))
+ generic_handle_irq(irq_find_mapping(priv->domain, i));
+ }
chained_irq_exit(chip, desc);
};
@@ -336,22 +372,15 @@
struct device_node *np = pdev->dev.of_node;
unsigned int i;
- for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+ /*
+ * Interrupt(s) must be provided, depending on the compatible:
+ * - stm32f4/h7 shares a common interrupt line.
+ * - stm32mp1, has one line per ADC
+ */
+ for (i = 0; i < priv->cfg->num_irqs; i++) {
priv->irq[i] = platform_get_irq(pdev, i);
- if (priv->irq[i] < 0) {
- /*
- * At least one interrupt must be provided, make others
- * optional:
- * - stm32f4/h7 shares a common interrupt.
- * - stm32mp1, has one line per ADC (either for ADC1,
- * ADC2 or both).
- */
- if (i && priv->irq[i] == -ENXIO)
- continue;
- dev_err(&pdev->dev, "failed to get irq\n");
-
+ if (priv->irq[i] < 0)
return priv->irq[i];
- }
}
priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
@@ -362,9 +391,7 @@
return -ENOMEM;
}
- for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
- if (priv->irq[i] < 0)
- continue;
+ for (i = 0; i < priv->cfg->num_irqs; i++) {
irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
irq_set_handler_data(priv->irq[i], priv);
}
@@ -382,11 +409,225 @@
irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
irq_domain_remove(priv->domain);
- for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
- if (priv->irq[i] < 0)
- continue;
+ for (i = 0; i < priv->cfg->num_irqs; i++)
irq_set_chained_handler(priv->irq[i], NULL);
+}
+
+static int stm32_adc_core_switches_supply_en(struct stm32_adc_priv *priv,
+ struct device *dev)
+{
+ int ret;
+
+ /*
+ * On STM32H7 and STM32MP1, the ADC inputs are multiplexed with analog
+ * switches (via PCSEL) which have reduced performances when their
+ * supply is below 2.7V (vdda by default):
+ * - Voltage booster can be used, to get full ADC performances
+ * (increases power consumption).
+ * - Vdd can be used to supply them, if above 2.7V (STM32MP1 only).
+ *
+ * Recommended settings for ANASWVDD and EN_BOOSTER:
+ * - vdda < 2.7V but vdd > 2.7V: ANASWVDD = 1, EN_BOOSTER = 0 (stm32mp1)
+ * - vdda < 2.7V and vdd < 2.7V: ANASWVDD = 0, EN_BOOSTER = 1
+ * - vdda >= 2.7V: ANASWVDD = 0, EN_BOOSTER = 0 (default)
+ */
+ if (priv->vdda_uv < 2700000) {
+ if (priv->syscfg && priv->vdd_uv > 2700000) {
+ ret = regulator_enable(priv->vdd);
+ if (ret < 0) {
+ dev_err(dev, "vdd enable failed %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(priv->syscfg,
+ STM32MP1_SYSCFG_PMCSETR,
+ STM32MP1_SYSCFG_ANASWVDD_MASK);
+ if (ret < 0) {
+ regulator_disable(priv->vdd);
+ dev_err(dev, "vdd select failed, %d\n", ret);
+ return ret;
+ }
+ dev_dbg(dev, "analog switches supplied by vdd\n");
+
+ return 0;
+ }
+
+ if (priv->booster) {
+ /*
+ * This is optional, as this is a trade-off between
+ * analog performance and power consumption.
+ */
+ ret = regulator_enable(priv->booster);
+ if (ret < 0) {
+ dev_err(dev, "booster enable failed %d\n", ret);
+ return ret;
+ }
+ dev_dbg(dev, "analog switches supplied by booster\n");
+
+ return 0;
+ }
}
+
+ /* Fallback using vdda (default), nothing to do */
+ dev_dbg(dev, "analog switches supplied by vdda (%d uV)\n",
+ priv->vdda_uv);
+
+ return 0;
+}
+
+static void stm32_adc_core_switches_supply_dis(struct stm32_adc_priv *priv)
+{
+ if (priv->vdda_uv < 2700000) {
+ if (priv->syscfg && priv->vdd_uv > 2700000) {
+ regmap_write(priv->syscfg, STM32MP1_SYSCFG_PMCCLRR,
+ STM32MP1_SYSCFG_ANASWVDD_MASK);
+ regulator_disable(priv->vdd);
+ return;
+ }
+ if (priv->booster)
+ regulator_disable(priv->booster);
+ }
+}
+
+static int stm32_adc_core_hw_start(struct device *dev)
+{
+ struct stm32_adc_common *common = dev_get_drvdata(dev);
+ struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+ int ret;
+
+ ret = regulator_enable(priv->vdda);
+ if (ret < 0) {
+ dev_err(dev, "vdda enable failed %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_get_voltage(priv->vdda);
+ if (ret < 0) {
+ dev_err(dev, "vdda get voltage failed, %d\n", ret);
+ goto err_vdda_disable;
+ }
+ priv->vdda_uv = ret;
+
+ ret = stm32_adc_core_switches_supply_en(priv, dev);
+ if (ret < 0)
+ goto err_vdda_disable;
+
+ ret = regulator_enable(priv->vref);
+ if (ret < 0) {
+ dev_err(dev, "vref enable failed\n");
+ goto err_switches_dis;
+ }
+
+ if (priv->bclk) {
+ ret = clk_prepare_enable(priv->bclk);
+ if (ret < 0) {
+ dev_err(dev, "bus clk enable failed\n");
+ goto err_regulator_disable;
+ }
+ }
+
+ if (priv->aclk) {
+ ret = clk_prepare_enable(priv->aclk);
+ if (ret < 0) {
+ dev_err(dev, "adc clk enable failed\n");
+ goto err_bclk_disable;
+ }
+ }
+
+ writel_relaxed(priv->ccr_bak, priv->common.base + priv->cfg->regs->ccr);
+
+ return 0;
+
+err_bclk_disable:
+ if (priv->bclk)
+ clk_disable_unprepare(priv->bclk);
+err_regulator_disable:
+ regulator_disable(priv->vref);
+err_switches_dis:
+ stm32_adc_core_switches_supply_dis(priv);
+err_vdda_disable:
+ regulator_disable(priv->vdda);
+
+ return ret;
+}
+
+static void stm32_adc_core_hw_stop(struct device *dev)
+{
+ struct stm32_adc_common *common = dev_get_drvdata(dev);
+ struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+
+ /* Backup CCR that may be lost (depends on power state to achieve) */
+ priv->ccr_bak = readl_relaxed(priv->common.base + priv->cfg->regs->ccr);
+ if (priv->aclk)
+ clk_disable_unprepare(priv->aclk);
+ if (priv->bclk)
+ clk_disable_unprepare(priv->bclk);
+ regulator_disable(priv->vref);
+ stm32_adc_core_switches_supply_dis(priv);
+ regulator_disable(priv->vdda);
+}
+
+static int stm32_adc_core_switches_probe(struct device *dev,
+ struct stm32_adc_priv *priv)
+{
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ /* Analog switches supply can be controlled by syscfg (optional) */
+ priv->syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(priv->syscfg)) {
+ ret = PTR_ERR(priv->syscfg);
+ if (ret != -ENODEV)
+ return dev_err_probe(dev, ret, "Can't probe syscfg\n");
+
+ priv->syscfg = NULL;
+ }
+
+ /* Booster can be used to supply analog switches (optional) */
+ if (priv->cfg->has_syscfg & HAS_VBOOSTER &&
+ of_property_read_bool(np, "booster-supply")) {
+ priv->booster = devm_regulator_get_optional(dev, "booster");
+ if (IS_ERR(priv->booster)) {
+ ret = PTR_ERR(priv->booster);
+ if (ret != -ENODEV)
+ return dev_err_probe(dev, ret, "can't get booster\n");
+
+ priv->booster = NULL;
+ }
+ }
+
+ /* Vdd can be used to supply analog switches (optional) */
+ if (priv->cfg->has_syscfg & HAS_ANASWVDD &&
+ of_property_read_bool(np, "vdd-supply")) {
+ priv->vdd = devm_regulator_get_optional(dev, "vdd");
+ if (IS_ERR(priv->vdd)) {
+ ret = PTR_ERR(priv->vdd);
+ if (ret != -ENODEV)
+ return dev_err_probe(dev, ret, "can't get vdd\n");
+
+ priv->vdd = NULL;
+ }
+ }
+
+ if (priv->vdd) {
+ ret = regulator_enable(priv->vdd);
+ if (ret < 0) {
+ dev_err(dev, "vdd enable failed %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_get_voltage(priv->vdd);
+ if (ret < 0) {
+ dev_err(dev, "vdd get voltage failed %d\n", ret);
+ regulator_disable(priv->vdd);
+ return ret;
+ }
+ priv->vdd_uv = ret;
+
+ regulator_disable(priv->vdd);
+ }
+
+ return 0;
}
static int stm32_adc_probe(struct platform_device *pdev)
@@ -395,6 +636,7 @@
struct device *dev = &pdev->dev;
struct device_node *np = pdev->dev.of_node;
struct resource *res;
+ u32 max_rate;
int ret;
if (!pdev->dev.of_node)
@@ -403,6 +645,7 @@
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ platform_set_drvdata(pdev, &priv->common);
priv->cfg = (const struct stm32_adc_priv_cfg *)
of_match_device(dev->driver->of_match_table, dev)->data;
@@ -413,74 +656,62 @@
return PTR_ERR(priv->common.base);
priv->common.phys_base = res->start;
- priv->vref = devm_regulator_get(&pdev->dev, "vref");
- if (IS_ERR(priv->vref)) {
- ret = PTR_ERR(priv->vref);
- dev_err(&pdev->dev, "vref get failed, %d\n", ret);
- return ret;
- }
+ priv->vdda = devm_regulator_get(&pdev->dev, "vdda");
+ if (IS_ERR(priv->vdda))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->vdda),
+ "vdda get failed\n");
- ret = regulator_enable(priv->vref);
- if (ret < 0) {
- dev_err(&pdev->dev, "vref enable failed\n");
+ priv->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (IS_ERR(priv->vref))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
+ "vref get failed\n");
+
+ priv->aclk = devm_clk_get_optional(&pdev->dev, "adc");
+ if (IS_ERR(priv->aclk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->aclk),
+ "Can't get 'adc' clock\n");
+
+ priv->bclk = devm_clk_get_optional(&pdev->dev, "bus");
+ if (IS_ERR(priv->bclk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->bclk),
+ "Can't get 'bus' clock\n");
+
+ ret = stm32_adc_core_switches_probe(dev, priv);
+ if (ret)
return ret;
- }
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_set_autosuspend_delay(dev, STM32_ADC_CORE_SLEEP_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_enable(dev);
+
+ ret = stm32_adc_core_hw_start(dev);
+ if (ret)
+ goto err_pm_stop;
ret = regulator_get_voltage(priv->vref);
if (ret < 0) {
dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
- goto err_regulator_disable;
+ goto err_hw_stop;
}
priv->common.vref_mv = ret / 1000;
dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
- priv->aclk = devm_clk_get(&pdev->dev, "adc");
- if (IS_ERR(priv->aclk)) {
- ret = PTR_ERR(priv->aclk);
- if (ret == -ENOENT) {
- priv->aclk = NULL;
- } else {
- dev_err(&pdev->dev, "Can't get 'adc' clock\n");
- goto err_regulator_disable;
- }
- }
-
- if (priv->aclk) {
- ret = clk_prepare_enable(priv->aclk);
- if (ret < 0) {
- dev_err(&pdev->dev, "adc clk enable failed\n");
- goto err_regulator_disable;
- }
- }
-
- priv->bclk = devm_clk_get(&pdev->dev, "bus");
- if (IS_ERR(priv->bclk)) {
- ret = PTR_ERR(priv->bclk);
- if (ret == -ENOENT) {
- priv->bclk = NULL;
- } else {
- dev_err(&pdev->dev, "Can't get 'bus' clock\n");
- goto err_aclk_disable;
- }
- }
-
- if (priv->bclk) {
- ret = clk_prepare_enable(priv->bclk);
- if (ret < 0) {
- dev_err(&pdev->dev, "adc clk enable failed\n");
- goto err_aclk_disable;
- }
- }
+ ret = of_property_read_u32(pdev->dev.of_node, "st,max-clk-rate-hz",
+ &max_rate);
+ if (!ret)
+ priv->max_clk_rate = min(max_rate, priv->cfg->max_clk_rate_hz);
+ else
+ priv->max_clk_rate = priv->cfg->max_clk_rate_hz;
ret = priv->cfg->clk_sel(pdev, priv);
if (ret < 0)
- goto err_bclk_disable;
+ goto err_hw_stop;
ret = stm32_adc_irq_probe(pdev, priv);
if (ret < 0)
- goto err_bclk_disable;
-
- platform_set_drvdata(pdev, &priv->common);
+ goto err_hw_stop;
ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
if (ret < 0) {
@@ -488,21 +719,19 @@
goto err_irq_remove;
}
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
return 0;
err_irq_remove:
stm32_adc_irq_remove(pdev, priv);
-
-err_bclk_disable:
- if (priv->bclk)
- clk_disable_unprepare(priv->bclk);
-
-err_aclk_disable:
- if (priv->aclk)
- clk_disable_unprepare(priv->aclk);
-
-err_regulator_disable:
- regulator_disable(priv->vref);
+err_hw_stop:
+ stm32_adc_core_hw_stop(dev);
+err_pm_stop:
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
return ret;
}
@@ -512,33 +741,70 @@
struct stm32_adc_common *common = platform_get_drvdata(pdev);
struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+ pm_runtime_get_sync(&pdev->dev);
of_platform_depopulate(&pdev->dev);
stm32_adc_irq_remove(pdev, priv);
- if (priv->bclk)
- clk_disable_unprepare(priv->bclk);
- if (priv->aclk)
- clk_disable_unprepare(priv->aclk);
- regulator_disable(priv->vref);
+ stm32_adc_core_hw_stop(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
return 0;
}
+
+#if defined(CONFIG_PM)
+static int stm32_adc_core_runtime_suspend(struct device *dev)
+{
+ stm32_adc_core_hw_stop(dev);
+
+ return 0;
+}
+
+static int stm32_adc_core_runtime_resume(struct device *dev)
+{
+ return stm32_adc_core_hw_start(dev);
+}
+
+static int stm32_adc_core_runtime_idle(struct device *dev)
+{
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops stm32_adc_core_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(stm32_adc_core_runtime_suspend,
+ stm32_adc_core_runtime_resume,
+ stm32_adc_core_runtime_idle)
+};
static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
.regs = &stm32f4_adc_common_regs,
.clk_sel = stm32f4_adc_clk_sel,
.max_clk_rate_hz = 36000000,
+ .num_irqs = 1,
+ .num_adcs = 3,
};
static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
.regs = &stm32h7_adc_common_regs,
.clk_sel = stm32h7_adc_clk_sel,
.max_clk_rate_hz = 36000000,
+ .has_syscfg = HAS_VBOOSTER,
+ .num_irqs = 1,
+ .num_adcs = 2,
};
static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
.regs = &stm32h7_adc_common_regs,
.clk_sel = stm32h7_adc_clk_sel,
- .max_clk_rate_hz = 40000000,
+ .max_clk_rate_hz = 36000000,
+ .has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
+ .num_irqs = 2,
+ .num_adcs = 2,
};
static const struct of_device_id stm32_adc_of_match[] = {
@@ -562,6 +828,7 @@
.driver = {
.name = "stm32-adc-core",
.of_match_table = stm32_adc_of_match,
+ .pm = &stm32_adc_core_pm_ops,
},
};
module_platform_driver(stm32_adc_driver);
--
Gitblit v1.6.2