From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800
---
kernel/drivers/hwmon/lm75.c | 566 +++++++++++++++++++++++++++++++++++++++++---------------
1 files changed, 413 insertions(+), 153 deletions(-)
diff --git a/kernel/drivers/hwmon/lm75.c b/kernel/drivers/hwmon/lm75.c
index 7f28912..e447feb 100644
--- a/kernel/drivers/hwmon/lm75.c
+++ b/kernel/drivers/hwmon/lm75.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* lm75.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
@@ -29,8 +16,9 @@
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/regmap.h>
+#include <linux/util_macros.h>
+#include <linux/regulator/consumer.h>
#include "lm75.h"
-
/*
* This driver handles the LM75 and compatible digital temperature sensors.
@@ -47,8 +35,11 @@
lm75b,
max6625,
max6626,
+ max31725,
mcp980x,
+ pct2075,
stds75,
+ stlm75,
tcn75,
tmp100,
tmp101,
@@ -57,35 +48,278 @@
tmp175,
tmp275,
tmp75,
+ tmp75b,
tmp75c,
+};
+
+/**
+ * struct lm75_params - lm75 configuration parameters.
+ * @set_mask: Bits to set in configuration register when configuring
+ * the chip.
+ * @clr_mask: Bits to clear in configuration register when configuring
+ * the chip.
+ * @default_resolution: Default number of bits to represent the temperature
+ * value.
+ * @resolution_limits: Limit register resolution. Optional. Should be set if
+ * the resolution of limit registers does not match the
+ * resolution of the temperature register.
+ * @resolutions: List of resolutions associated with sample times.
+ * Optional. Should be set if num_sample_times is larger
+ * than 1, and if the resolution changes with sample times.
+ * If set, number of entries must match num_sample_times.
+ * @default_sample_time:Sample time to be set by default.
+ * @num_sample_times: Number of possible sample times to be set. Optional.
+ * Should be set if the number of sample times is larger
+ * than one.
+ * @sample_times: All the possible sample times to be set. Mandatory if
+ * num_sample_times is larger than 1. If set, number of
+ * entries must match num_sample_times.
+ */
+
+struct lm75_params {
+ u8 set_mask;
+ u8 clr_mask;
+ u8 default_resolution;
+ u8 resolution_limits;
+ const u8 *resolutions;
+ unsigned int default_sample_time;
+ u8 num_sample_times;
+ const unsigned int *sample_times;
};
/* Addresses scanned */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-
/* The LM75 registers */
#define LM75_REG_TEMP 0x00
#define LM75_REG_CONF 0x01
#define LM75_REG_HYST 0x02
#define LM75_REG_MAX 0x03
+#define PCT2075_REG_IDLE 0x04
/* Each client has this additional data */
struct lm75_data {
- struct i2c_client *client;
- struct regmap *regmap;
- u8 orig_conf;
- u8 resolution; /* In bits, between 9 and 12 */
- u8 resolution_limits;
- unsigned int sample_time; /* In ms */
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct regulator *vs;
+ u8 orig_conf;
+ u8 current_conf;
+ u8 resolution; /* In bits, 9 to 16 */
+ unsigned int sample_time; /* In ms */
+ enum lm75_type kind;
+ const struct lm75_params *params;
};
/*-----------------------------------------------------------------------*/
+static const u8 lm75_sample_set_masks[] = { 0 << 5, 1 << 5, 2 << 5, 3 << 5 };
+
+#define LM75_SAMPLE_CLEAR_MASK (3 << 5)
+
+/* The structure below stores the configuration values of the supported devices.
+ * In case of being supported multiple configurations, the default one must
+ * always be the first element of the array
+ */
+static const struct lm75_params device_params[] = {
+ [adt75] = {
+ .clr_mask = 1 << 5, /* not one-shot mode */
+ .default_resolution = 12,
+ .default_sample_time = MSEC_PER_SEC / 10,
+ },
+ [ds1775] = {
+ .clr_mask = 3 << 5,
+ .set_mask = 2 << 5, /* 11-bit mode */
+ .default_resolution = 11,
+ .default_sample_time = 500,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 125, 250, 500, 1000 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [ds75] = {
+ .clr_mask = 3 << 5,
+ .set_mask = 2 << 5, /* 11-bit mode */
+ .default_resolution = 11,
+ .default_sample_time = 600,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 150, 300, 600, 1200 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [stds75] = {
+ .clr_mask = 3 << 5,
+ .set_mask = 2 << 5, /* 11-bit mode */
+ .default_resolution = 11,
+ .default_sample_time = 600,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 150, 300, 600, 1200 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [stlm75] = {
+ .default_resolution = 9,
+ .default_sample_time = MSEC_PER_SEC / 6,
+ },
+ [ds7505] = {
+ .set_mask = 3 << 5, /* 12-bit mode*/
+ .default_resolution = 12,
+ .default_sample_time = 200,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 25, 50, 100, 200 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [g751] = {
+ .default_resolution = 9,
+ .default_sample_time = MSEC_PER_SEC / 10,
+ },
+ [lm75] = {
+ .default_resolution = 9,
+ .default_sample_time = MSEC_PER_SEC / 10,
+ },
+ [lm75a] = {
+ .default_resolution = 9,
+ .default_sample_time = MSEC_PER_SEC / 10,
+ },
+ [lm75b] = {
+ .default_resolution = 11,
+ .default_sample_time = MSEC_PER_SEC / 10,
+ },
+ [max6625] = {
+ .default_resolution = 9,
+ .default_sample_time = MSEC_PER_SEC / 7,
+ },
+ [max6626] = {
+ .default_resolution = 12,
+ .default_sample_time = MSEC_PER_SEC / 7,
+ .resolution_limits = 9,
+ },
+ [max31725] = {
+ .default_resolution = 16,
+ .default_sample_time = MSEC_PER_SEC / 20,
+ },
+ [tcn75] = {
+ .default_resolution = 9,
+ .default_sample_time = MSEC_PER_SEC / 18,
+ },
+ [pct2075] = {
+ .default_resolution = 11,
+ .default_sample_time = MSEC_PER_SEC / 10,
+ .num_sample_times = 31,
+ .sample_times = (unsigned int []){ 100, 200, 300, 400, 500, 600,
+ 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700,
+ 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700,
+ 2800, 2900, 3000, 3100 },
+ },
+ [mcp980x] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode */
+ .default_resolution = 12,
+ .resolution_limits = 9,
+ .default_sample_time = 240,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 30, 60, 120, 240 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp100] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode */
+ .default_resolution = 12,
+ .default_sample_time = 320,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 40, 80, 160, 320 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp101] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode */
+ .default_resolution = 12,
+ .default_sample_time = 320,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 40, 80, 160, 320 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp105] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode*/
+ .default_resolution = 12,
+ .default_sample_time = 220,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 28, 55, 110, 220 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp112] = {
+ .set_mask = 3 << 5, /* 8 samples / second */
+ .clr_mask = 1 << 7, /* no one-shot mode*/
+ .default_resolution = 12,
+ .default_sample_time = 125,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 125, 250, 1000, 4000 },
+ },
+ [tmp175] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode*/
+ .default_resolution = 12,
+ .default_sample_time = 220,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 28, 55, 110, 220 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp275] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode*/
+ .default_resolution = 12,
+ .default_sample_time = 220,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 28, 55, 110, 220 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp75] = {
+ .set_mask = 3 << 5, /* 12-bit mode */
+ .clr_mask = 1 << 7, /* not one-shot mode*/
+ .default_resolution = 12,
+ .default_sample_time = 220,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 28, 55, 110, 220 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
+ [tmp75b] = { /* not one-shot mode, Conversion rate 37Hz */
+ .clr_mask = 1 << 7 | 3 << 5,
+ .default_resolution = 12,
+ .default_sample_time = MSEC_PER_SEC / 37,
+ .sample_times = (unsigned int []){ MSEC_PER_SEC / 37,
+ MSEC_PER_SEC / 18,
+ MSEC_PER_SEC / 9, MSEC_PER_SEC / 4 },
+ .num_sample_times = 4,
+ },
+ [tmp75c] = {
+ .clr_mask = 1 << 5, /*not one-shot mode*/
+ .default_resolution = 12,
+ .default_sample_time = MSEC_PER_SEC / 12,
+ }
+};
+
static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
{
return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
+}
+
+static int lm75_write_config(struct lm75_data *data, u8 set_mask,
+ u8 clr_mask)
+{
+ u8 value;
+
+ clr_mask |= LM75_SHUTDOWN;
+ value = data->current_conf & ~clr_mask;
+ value |= set_mask;
+
+ if (data->current_conf != value) {
+ s32 err;
+
+ err = i2c_smbus_write_byte_data(data->client, LM75_REG_CONF,
+ value);
+ if (err)
+ return err;
+ data->current_conf = value;
+ }
+ return 0;
}
static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
@@ -131,15 +365,11 @@
return 0;
}
-static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
- u32 attr, int channel, long temp)
+static int lm75_write_temp(struct device *dev, u32 attr, long temp)
{
struct lm75_data *data = dev_get_drvdata(dev);
u8 resolution;
int reg;
-
- if (type != hwmon_temp)
- return -EINVAL;
switch (attr) {
case hwmon_temp_max:
@@ -156,8 +386,8 @@
* Resolution of limit registers is assumed to be the same as the
* temperature input register resolution unless given explicitly.
*/
- if (data->resolution_limits)
- resolution = data->resolution_limits;
+ if (data->params->resolution_limits)
+ resolution = data->params->resolution_limits;
else
resolution = data->resolution;
@@ -168,23 +398,95 @@
return regmap_write(data->regmap, reg, (u16)temp);
}
+static int lm75_update_interval(struct device *dev, long val)
+{
+ struct lm75_data *data = dev_get_drvdata(dev);
+ unsigned int reg;
+ u8 index;
+ s32 err;
+
+ index = find_closest(val, data->params->sample_times,
+ (int)data->params->num_sample_times);
+
+ switch (data->kind) {
+ default:
+ err = lm75_write_config(data, lm75_sample_set_masks[index],
+ LM75_SAMPLE_CLEAR_MASK);
+ if (err)
+ return err;
+
+ data->sample_time = data->params->sample_times[index];
+ if (data->params->resolutions)
+ data->resolution = data->params->resolutions[index];
+ break;
+ case tmp112:
+ err = regmap_read(data->regmap, LM75_REG_CONF, ®);
+ if (err < 0)
+ return err;
+ reg &= ~0x00c0;
+ reg |= (3 - index) << 6;
+ err = regmap_write(data->regmap, LM75_REG_CONF, reg);
+ if (err < 0)
+ return err;
+ data->sample_time = data->params->sample_times[index];
+ break;
+ case pct2075:
+ err = i2c_smbus_write_byte_data(data->client, PCT2075_REG_IDLE,
+ index + 1);
+ if (err)
+ return err;
+ data->sample_time = data->params->sample_times[index];
+ break;
+ }
+ return 0;
+}
+
+static int lm75_write_chip(struct device *dev, u32 attr, long val)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return lm75_update_interval(dev, val);
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ switch (type) {
+ case hwmon_chip:
+ return lm75_write_chip(dev, attr, val);
+ case hwmon_temp:
+ return lm75_write_temp(dev, attr, val);
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
+ const struct lm75_data *config_data = data;
+
switch (type) {
case hwmon_chip:
switch (attr) {
case hwmon_chip_update_interval:
- return S_IRUGO;
+ if (config_data->params->num_sample_times > 1)
+ return 0644;
+ return 0444;
}
break;
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
- return S_IRUGO;
+ return 0444;
case hwmon_temp_max:
case hwmon_temp_max_hyst:
- return S_IRUGO | S_IWUSR;
+ return 0644;
}
break;
default:
@@ -193,35 +495,11 @@
return 0;
}
-/*-----------------------------------------------------------------------*/
-
-/* device probe and removal */
-
-/* chip configuration */
-
-static const u32 lm75_chip_config[] = {
- HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
- 0
-};
-
-static const struct hwmon_channel_info lm75_chip = {
- .type = hwmon_chip,
- .config = lm75_chip_config,
-};
-
-static const u32 lm75_temp_config[] = {
- HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST,
- 0
-};
-
-static const struct hwmon_channel_info lm75_temp = {
- .type = hwmon_temp,
- .config = lm75_temp_config,
-};
-
static const struct hwmon_channel_info *lm75_info[] = {
- &lm75_chip,
- &lm75_temp,
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST),
NULL
};
@@ -243,19 +521,27 @@
static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
{
- return reg == LM75_REG_TEMP;
+ return reg == LM75_REG_TEMP || reg == LM75_REG_CONF;
}
static const struct regmap_config lm75_regmap_config = {
.reg_bits = 8,
.val_bits = 16,
- .max_register = LM75_REG_MAX,
+ .max_register = PCT2075_REG_IDLE,
.writeable_reg = lm75_is_writeable_reg,
.volatile_reg = lm75_is_volatile_reg,
.val_format_endian = REGMAP_ENDIAN_BIG,
.cache_type = REGCACHE_RBTREE,
- .use_single_rw = true,
+ .use_single_read = true,
+ .use_single_write = true,
};
+
+static void lm75_disable_regulator(void *data)
+{
+ struct lm75_data *lm75 = data;
+
+ regulator_disable(lm75->vs);
+}
static void lm75_remove(void *data)
{
@@ -265,21 +551,20 @@
i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
}
-static int
-lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static const struct i2c_device_id lm75_ids[];
+
+static int lm75_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct lm75_data *data;
int status, err;
- u8 set_mask, clr_mask;
- int new;
enum lm75_type kind;
if (client->dev.of_node)
kind = (enum lm75_type)of_device_get_match_data(&client->dev);
else
- kind = id->driver_data;
+ kind = i2c_match_id(lm75_ids, client)->driver_data;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
@@ -290,6 +575,11 @@
return -ENOMEM;
data->client = client;
+ data->kind = kind;
+
+ data->vs = devm_regulator_get(dev, "vs");
+ if (IS_ERR(data->vs))
+ return PTR_ERR(data->vs);
data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
if (IS_ERR(data->regmap))
@@ -298,100 +588,41 @@
/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
* Then tweak to be more precise when appropriate.
*/
- set_mask = 0;
- clr_mask = LM75_SHUTDOWN; /* continuous conversions */
- switch (kind) {
- case adt75:
- clr_mask |= 1 << 5; /* not one-shot mode */
- data->resolution = 12;
- data->sample_time = MSEC_PER_SEC / 8;
- break;
- case ds1775:
- case ds75:
- case stds75:
- clr_mask |= 3 << 5;
- set_mask |= 2 << 5; /* 11-bit mode */
- data->resolution = 11;
- data->sample_time = MSEC_PER_SEC;
- break;
- case ds7505:
- set_mask |= 3 << 5; /* 12-bit mode */
- data->resolution = 12;
- data->sample_time = MSEC_PER_SEC / 4;
- break;
- case g751:
- case lm75:
- case lm75a:
- data->resolution = 9;
- data->sample_time = MSEC_PER_SEC / 2;
- break;
- case lm75b:
- data->resolution = 11;
- data->sample_time = MSEC_PER_SEC / 4;
- break;
- case max6625:
- data->resolution = 9;
- data->sample_time = MSEC_PER_SEC / 4;
- break;
- case max6626:
- data->resolution = 12;
- data->resolution_limits = 9;
- data->sample_time = MSEC_PER_SEC / 4;
- break;
- case tcn75:
- data->resolution = 9;
- data->sample_time = MSEC_PER_SEC / 8;
- break;
- case mcp980x:
- data->resolution_limits = 9;
- /* fall through */
- case tmp100:
- case tmp101:
- set_mask |= 3 << 5; /* 12-bit mode */
- data->resolution = 12;
- data->sample_time = MSEC_PER_SEC;
- clr_mask |= 1 << 7; /* not one-shot mode */
- break;
- case tmp112:
- set_mask |= 3 << 5; /* 12-bit mode */
- clr_mask |= 1 << 7; /* not one-shot mode */
- data->resolution = 12;
- data->sample_time = MSEC_PER_SEC / 4;
- break;
- case tmp105:
- case tmp175:
- case tmp275:
- case tmp75:
- set_mask |= 3 << 5; /* 12-bit mode */
- clr_mask |= 1 << 7; /* not one-shot mode */
- data->resolution = 12;
- data->sample_time = MSEC_PER_SEC / 2;
- break;
- case tmp75c:
- clr_mask |= 1 << 5; /* not one-shot mode */
- data->resolution = 12;
- data->sample_time = MSEC_PER_SEC / 4;
- break;
+ data->params = &device_params[data->kind];
+
+ /* Save default sample time and resolution*/
+ data->sample_time = data->params->default_sample_time;
+ data->resolution = data->params->default_resolution;
+
+ /* Enable the power */
+ err = regulator_enable(data->vs);
+ if (err) {
+ dev_err(dev, "failed to enable regulator: %d\n", err);
+ return err;
}
- /* configure as specified */
+ err = devm_add_action_or_reset(dev, lm75_disable_regulator, data);
+ if (err)
+ return err;
+
+ /* Cache original configuration */
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(dev, "Can't read config? %d\n", status);
return status;
}
data->orig_conf = status;
- new = status & ~clr_mask;
- new |= set_mask;
- if (status != new)
- i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);
+ data->current_conf = status;
+
+ err = lm75_write_config(data, data->params->set_mask,
+ data->params->clr_mask);
+ if (err)
+ return err;
err = devm_add_action_or_reset(dev, lm75_remove, data);
if (err)
return err;
-
- dev_dbg(dev, "Config %02x\n", new);
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data, &lm75_chip_info,
@@ -415,8 +646,12 @@
{ "lm75b", lm75b, },
{ "max6625", max6625, },
{ "max6626", max6626, },
+ { "max31725", max31725, },
+ { "max31726", max31725, },
{ "mcp980x", mcp980x, },
+ { "pct2075", pct2075, },
{ "stds75", stds75, },
+ { "stlm75", stlm75, },
{ "tcn75", tcn75, },
{ "tmp100", tmp100, },
{ "tmp101", tmp101, },
@@ -425,12 +660,13 @@
{ "tmp175", tmp175, },
{ "tmp275", tmp275, },
{ "tmp75", tmp75, },
+ { "tmp75b", tmp75b, },
{ "tmp75c", tmp75c, },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, lm75_ids);
-static const struct of_device_id lm75_of_match[] = {
+static const struct of_device_id __maybe_unused lm75_of_match[] = {
{
.compatible = "adi,adt75",
.data = (void *)adt75
@@ -472,12 +708,28 @@
.data = (void *)max6626
},
{
+ .compatible = "maxim,max31725",
+ .data = (void *)max31725
+ },
+ {
+ .compatible = "maxim,max31726",
+ .data = (void *)max31725
+ },
+ {
.compatible = "maxim,mcp980x",
.data = (void *)mcp980x
},
{
+ .compatible = "nxp,pct2075",
+ .data = (void *)pct2075
+ },
+ {
.compatible = "st,stds75",
.data = (void *)stds75
+ },
+ {
+ .compatible = "st,stlm75",
+ .data = (void *)stlm75
},
{
.compatible = "microchip,tcn75",
@@ -510,6 +762,10 @@
{
.compatible = "ti,tmp75",
.data = (void *)tmp75
+ },
+ {
+ .compatible = "ti,tmp75b",
+ .data = (void *)tmp75b
},
{
.compatible = "ti,tmp75c",
@@ -566,8 +822,10 @@
/* First check for LM75A */
if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
- /* LM75A returns 0xff on unused registers so
- just to be sure we check for that too. */
+ /*
+ * LM75A returns 0xff on unused registers so
+ * just to be sure we check for that too.
+ */
if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
|| i2c_smbus_read_byte_data(new_client, 5) != 0xff
|| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
@@ -618,6 +876,7 @@
{
int status;
struct i2c_client *client = to_i2c_client(dev);
+
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", status);
@@ -632,6 +891,7 @@
{
int status;
struct i2c_client *client = to_i2c_client(dev);
+
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", status);
@@ -658,7 +918,7 @@
.of_match_table = of_match_ptr(lm75_of_match),
.pm = LM75_DEV_PM_OPS,
},
- .probe = lm75_probe,
+ .probe_new = lm75_probe,
.id_table = lm75_ids,
.detect = lm75_detect,
.address_list = normal_i2c,
--
Gitblit v1.6.2