From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800
---
kernel/Documentation/sound/soc/dpcm.rst | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/kernel/Documentation/sound/soc/dpcm.rst b/kernel/Documentation/sound/soc/dpcm.rst
index fe61e02..77f67de 100644
--- a/kernel/Documentation/sound/soc/dpcm.rst
+++ b/kernel/Documentation/sound/soc/dpcm.rst
@@ -13,7 +13,7 @@
The DPCM runtime routing is determined by the ALSA mixer settings in the same
way as the analog signal is routed in an ASoC codec driver. DPCM uses a DAPM
graph representing the DSP internal audio paths and uses the mixer settings to
-determine the patch used by each ALSA PCM.
+determine the path used by each ALSA PCM.
DPCM re-uses all the existing component codec, platform and DAI drivers without
any modifications.
@@ -101,7 +101,7 @@
4. Machine driver or audio HAL enables the speaker path.
-5. DPCM runs the PCM ops for startup(), hw_params(), prepapre() and
+5. DPCM runs the PCM ops for startup(), hw_params(), prepare() and
trigger(start) for DAI1 Speakers since the path is enabled.
In this example, the machine driver or userspace audio HAL can alter the routing
@@ -218,10 +218,10 @@
* * <----DAI5-----> FM
*************
-This allows the host CPU to sleep whilst the DSP, MODEM DAI and the BT DAI are
+This allows the host CPU to sleep while the DSP, MODEM DAI and the BT DAI are
still in operation.
-A BE DAI link can also set the codec to a dummy device if the code is a device
+A BE DAI link can also set the codec to a dummy device if the codec is a device
that is managed externally.
Likewise a BE DAI can also set a dummy cpu DAI if the CPU DAI is managed by the
@@ -249,7 +249,7 @@
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
- /* The DSP will covert the FE rate to 48k, stereo */
+ /* The DSP will convert the FE rate to 48k, stereo */
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
@@ -386,5 +386,3 @@
DAI links. The DAI links will be started when the FE PCM is started and stopped
when the FE PCM is stopped. Note that the FE PCM cannot read or write data in
this configuration.
-
-
--
Gitblit v1.6.2