From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800
---
kernel/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 54 insertions(+), 4 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/kernel/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index ed4710c..bbf4a13 100644
--- a/kernel/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/kernel/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -2,8 +2,8 @@
========================
This defines device tree bindings for the Vitesse VSC73xx switch chips.
-The Vitesse company has been acquired by Microsemi and Microsemi in turn
-acquired by Microchip but retains this vendor branding.
+The Vitesse company has been acquired by Microsemi and Microsemi has
+been acquired Microchip but retains this vendor branding.
The currently supported switch chips are:
Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
@@ -11,8 +11,14 @@
Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
-The device tree node is an SPI device so it must reside inside a SPI bus
-device tree node, see spi/spi-bus.txt
+This switch could have two different management interface.
+
+If SPI interface is used, the device tree node is an SPI device so it must
+reside inside a SPI bus device tree node, see spi/spi-bus.txt
+
+When the chip is connected to a parallel memory bus and work in memory-mapped
+I/O mode, a platform device is used to represent the vsc73xx. In this case it
+must reside inside a platform bus device tree node.
Required properties:
@@ -38,6 +44,7 @@
Examples:
+SPI:
switch@0 {
compatible = "vitesse,vsc7395";
reg = <0>;
@@ -79,3 +86,46 @@
};
};
};
+
+Platform:
+switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse,vsc7385";
+ reg = <0x2 0x0 0x20000>;
+ reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ vsc: port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&enet0>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+};
--
Gitblit v1.6.2