From f70575805708cabdedea7498aaa3f710fde4d920 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 31 Jan 2024 03:29:01 +0000
Subject: [PATCH] add lvds1024*800

---
 kernel/Documentation/devicetree/bindings/net/dsa/b53.txt |   48 ++++++++++++++++++++++++++++++++++++++++++++----
 1 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/kernel/Documentation/devicetree/bindings/net/dsa/b53.txt b/kernel/Documentation/devicetree/bindings/net/dsa/b53.txt
index 1811e19..f1487a7 100644
--- a/kernel/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/kernel/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -46,6 +46,42 @@
       "brcm,bcm6328-switch"
       "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
 
+Required properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg: a total of 3 register base addresses, the first one must be the
+   Switch Register Access block base, the second is the port 5/4 mux
+   configuration register and the third one is the SGMII configuration
+   and status register base address.
+
+ - interrupts: a total of 13 interrupts must be specified, in the following
+   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
+   then the timestamping interrupt and the sleep timer interrupts for ports
+   5,7,8.
+
+Optional properties for BCM585xx/586xx/88312 SoCs:
+
+  - reg-names: a total of 3 names matching the 3 base register address, must
+    be in the following order:
+	"srab"
+	"mux_config"
+	"sgmii_config"
+
+  - interrupt-names: a total of 13 names matching the 13 interrupts specified
+    must be in the following order:
+	"link_state_p0"
+	"link_state_p1"
+	"link_state_p2"
+	"link_state_p3"
+	"link_state_p4"
+	"link_state_p5"
+	"link_state_p7"
+	"link_state_p8"
+	"phy"
+	"ts"
+	"imp_sleep_timer_p5"
+	"imp_sleep_timer_p7"
+	"imp_sleep_timer_p8"
+
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
 
@@ -59,7 +95,7 @@
 
 		fixed-link {
 			speed = <1000>;
-			duplex-full;
+			full-duplex;
 		};
 	};
 
@@ -68,12 +104,16 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch0: ethernet-switch@30 {
+		switch0: ethernet-switch@1e {
 			compatible = "brcm,bcm53125";
+			reg = <30>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port0@0 {
 					reg = <0>;
 					label = "lan1";
@@ -89,7 +129,7 @@
 					label = "cable-modem";
 					fixed-link {
 						speed = <1000>;
-						duplex-full;
+						full-duplex;
 					};
 					phy-mode = "rgmii-txid";
 				};
@@ -99,7 +139,7 @@
 					label = "cpu";
 					fixed-link {
 						speed = <1000>;
-						duplex-full;
+						full-duplex;
 					};
 					phy-mode = "rgmii-txid";
 					ethernet = <&eth0>;

--
Gitblit v1.6.2