From ee930fffee469d076998274a2ca55e13dc1efb67 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 08:50:54 +0000
Subject: [PATCH] enable tun/tap/iptables
---
kernel/drivers/misc/ti-st/st_kim.c | 126 +++++++++++++++++------------------------
1 files changed, 52 insertions(+), 74 deletions(-)
diff --git a/kernel/drivers/misc/ti-st/st_kim.c b/kernel/drivers/misc/ti-st/st_kim.c
index 1874ac9..f2f6cab 100644
--- a/kernel/drivers/misc/ti-st/st_kim.c
+++ b/kernel/drivers/misc/ti-st/st_kim.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Shared Transport Line discipline driver Core
* Init Manager module responsible for GPIO control
* and firmware download
* Copyright (C) 2009-2010 Texas Instruments
* Author: Pavan Savoy <pavan_savoy@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#define pr_fmt(fmt) "(stk) :" fmt
@@ -43,7 +30,7 @@
/**********************************************************************/
/* internal functions */
-/**
+/*
* st_get_plat_device -
* function which returns the reference to the platform device
* requested by id. As of now only 1 such device exists (id=0)
@@ -56,7 +43,7 @@
return st_kim_devices[id];
}
-/**
+/*
* validate_firmware_response -
* function to return whether the firmware response was proper
* in case of error don't complete so that waiting for proper
@@ -68,7 +55,8 @@
if (!skb)
return;
- /* these magic numbers are the position in the response buffer which
+ /*
+ * these magic numbers are the position in the response buffer which
* allows us to distinguish whether the response is for the read
* version info. command
*/
@@ -92,7 +80,8 @@
kfree_skb(skb);
}
-/* check for data len received inside kim_int_recv
+/*
+ * check for data len received inside kim_int_recv
* most often hit the last case to update state to waiting for data
*/
static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
@@ -104,14 +93,16 @@
if (!len) {
validate_firmware_response(kim_gdata);
} else if (len > room) {
- /* Received packet's payload length is larger.
+ /*
+ * Received packet's payload length is larger.
* We can't accommodate it in created skb.
*/
pr_err("Data length is too large len %d room %d", len,
room);
kfree_skb(kim_gdata->rx_skb);
} else {
- /* Packet header has non-zero payload length and
+ /*
+ * Packet header has non-zero payload length and
* we have enough space in created skb. Lets read
* payload data */
kim_gdata->rx_state = ST_W4_DATA;
@@ -119,8 +110,10 @@
return len;
}
- /* Change ST LL state to continue to process next
- * packet */
+ /*
+ * Change ST LL state to continue to process next
+ * packet
+ */
kim_gdata->rx_state = ST_W4_PACKET_TYPE;
kim_gdata->rx_skb = NULL;
kim_gdata->rx_count = 0;
@@ -128,7 +121,7 @@
return 0;
}
-/**
+/*
* kim_int_recv - receive function called during firmware download
* firmware download responses on different UART drivers
* have been observed to come in bursts of different
@@ -211,7 +204,7 @@
static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
{
unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
- const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
+ static const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
long timeout;
pr_debug("%s", __func__);
@@ -229,7 +222,8 @@
return timeout ? -ERESTARTSYS : -ETIMEDOUT;
}
reinit_completion(&kim_gdata->kim_rcvd);
- /* the positions 12 & 13 in the response buffer provide with the
+ /*
+ * the positions 12 & 13 in the response buffer provide with the
* chip, major & minor numbers
*/
@@ -276,7 +270,7 @@
}
}
-/**
+/*
* download_firmware -
* internal function which parses through the .bts firmware
* script file intreprets SEND, DELAY actions only as of now
@@ -308,7 +302,8 @@
}
ptr = (void *)kim_gdata->fw_entry->data;
len = kim_gdata->fw_entry->size;
- /* bts_header to remove out magic number and
+ /*
+ * bts_header to remove out magic number and
* version
*/
ptr += sizeof(struct bts_header);
@@ -326,8 +321,10 @@
if (unlikely
(((struct hci_command *)action_ptr)->opcode ==
0xFF36)) {
- /* ignore remote change
- * baud rate HCI VS command */
+ /*
+ * ignore remote change
+ * baud rate HCI VS command
+ */
pr_warn("change remote baud"
" rate command in firmware");
skip_change_remote_baud(&ptr, &len);
@@ -359,7 +356,8 @@
release_firmware(kim_gdata->fw_entry);
return -ETIMEDOUT;
}
- /* reinit completion before sending for the
+ /*
+ * reinit completion before sending for the
* relevant wait
*/
reinit_completion(&kim_gdata->kim_rcvd);
@@ -431,14 +429,16 @@
struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
struct kim_data_s *kim_gdata = st_gdata->kim_data;
- /* proceed to gather all data and distinguish read fw version response
+ /*
+ * proceed to gather all data and distinguish read fw version response
* from other fw responses when data gathering is complete
*/
kim_int_recv(kim_gdata, data, count);
return;
}
-/* to signal completion of line discipline installation
+/*
+ * to signal completion of line discipline installation
* called from ST Core, upon tty_open
*/
void st_kim_complete(void *kim_data)
@@ -447,7 +447,7 @@
complete(&kim_gdata->ldisc_installed);
}
-/**
+/*
* st_kim_start - called from ST Core upon 1st registration
* This involves toggling the chip enable gpio, reading
* the firmware version from chip, forming the fw file name
@@ -485,8 +485,10 @@
err = wait_for_completion_interruptible_timeout(
&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
if (!err) {
- /* ldisc installation timeout,
- * flush uart, power cycle BT_EN */
+ /*
+ * ldisc installation timeout,
+ * flush uart, power cycle BT_EN
+ */
pr_err("ldisc installation timeout");
err = st_kim_stop(kim_gdata);
continue;
@@ -495,8 +497,10 @@
pr_info("line discipline installed");
err = download_firmware(kim_gdata);
if (err != 0) {
- /* ldisc installed but fw download failed,
- * flush uart & power cycle BT_EN */
+ /*
+ * ldisc installed but fw download failed,
+ * flush uart & power cycle BT_EN
+ */
pr_err("download firmware failed");
err = st_kim_stop(kim_gdata);
continue;
@@ -508,7 +512,7 @@
return err;
}
-/**
+/*
* st_kim_stop - stop communication with chip.
* This can be called from ST Core/KIM, on the-
* (a) last un-register when chip need not be powered there-after,
@@ -564,7 +568,7 @@
/* functions called from subsystems */
/* called when debugfs entry is read from */
-static int show_version(struct seq_file *s, void *unused)
+static int version_show(struct seq_file *s, void *unused)
{
struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
@@ -573,7 +577,7 @@
return 0;
}
-static int show_list(struct seq_file *s, void *unused)
+static int list_show(struct seq_file *s, void *unused)
{
struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
kim_st_list_protocols(kim_gdata->core_data, s);
@@ -663,7 +667,7 @@
.attrs = uim_attrs,
};
-/**
+/*
* st_kim_ref - reference the core's data
* This references the per-ST platform device in the arch/xx/
* board-xx.c file.
@@ -688,30 +692,8 @@
*core_data = NULL;
}
-static int kim_version_open(struct inode *i, struct file *f)
-{
- return single_open(f, show_version, i->i_private);
-}
-
-static int kim_list_open(struct inode *i, struct file *f)
-{
- return single_open(f, show_list, i->i_private);
-}
-
-static const struct file_operations version_debugfs_fops = {
- /* version info */
- .open = kim_version_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-static const struct file_operations list_debugfs_fops = {
- /* protocols info */
- .open = kim_list_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(version);
+DEFINE_SHOW_ATTRIBUTE(list);
/**********************************************************************/
/* functions called from platform device driver subsystem
@@ -764,8 +746,7 @@
pr_err(" unable to configure gpio %d", kim_gdata->nshutdown);
goto err_sysfs_group;
}
- /* get reference of pdev for request_firmware
- */
+ /* get reference of pdev for request_firmware */
kim_gdata->kim_pdev = pdev;
init_completion(&kim_gdata->kim_rcvd);
init_completion(&kim_gdata->ldisc_installed);
@@ -783,15 +764,11 @@
pr_info("sysfs entries created\n");
kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
- if (!kim_debugfs_dir) {
- pr_err(" debugfs entries creation failed ");
- return 0;
- }
debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
- kim_gdata, &version_debugfs_fops);
+ kim_gdata, &version_fops);
debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
- kim_gdata, &list_debugfs_fops);
+ kim_gdata, &list_fops);
return 0;
err_sysfs_group:
@@ -811,7 +788,8 @@
kim_gdata = platform_get_drvdata(pdev);
- /* Free the Bluetooth/FM/GPIO
+ /*
+ * Free the Bluetooth/FM/GPIO
* nShutdown gpio from the system
*/
gpio_free(pdata->nshutdown_gpio);
--
Gitblit v1.6.2